开云体育

Hi, Could someone point me in the right direction please? I have a DMPS300C with a Fire TV connected to Input 1. I would like to control the Fire TV via CEC but cannot find anywhere in Simpl to tie

Sounds like you're new to Simpl. Go watch the entire set of Overworked Logic Videos on Simpl windows and that should be a good starting

I am trying to build a small 4-6 camera security system on a TSW-1060. I have read where its only allowed to run one embedded video stream smart graphic and my DGE-200 can only run two streams. Can

Use a serial I/O, but be sure to include any delimiters required such as carriage returns. Check the serial I/O help file for formatting and string placement.

I would like to have it so that when I press “digital join 44”, is also sends a RS232 command of “*set input=HDMI3/PC” to my Smart board. I know it can be done by using “send signal”

Tony Howard, Have you had much experience with the automation feature on the 2N units?? I am trying to get the intercom to send my controller http request whenever a pin code or card is entered.?

I've had the most luck drilling all the way down to the executable in,?C:\Program Files (x86)\Crestron\Simpl, and then finding each .exe file, right clicking on it, going to properties, choosing

Gotcha, run as admin. Seems to kinda work, though the ‘apply’ button never goes live. Stays grayed out even after changes. Maybe this is a software bug.

I also had this problem and the above comment was how I fixed it previously.? Even though I had installed as admin.

Anyone have any success controlling a Samsung UN82RU8000F via IP or RS232? I know it doesn't have an EX-Link port, but does the USB adapter work as far as anyone knows? I'd prefer IP but will take

Lutron Caseta with the Pro Bridge with in wall Dimmer and Pico Remotes for 3-way switches is an option.? If you don't get the Pro Bridge version you can't telnet and therefore you can't control via

Hi Dave, I'll take another look ;-) All the best, Oliver

I believe the main fusion module starts at 50.? There is no standard for what signals get used and an order, you need to come up with one for the site deployment that you use. The official training,

Josh, the first install I did not, the second time I did. No difference for me. You had the same issue but fixed it?

Sorry to ask, as i just had the same problem....... Did you right click and run as ADMIN??? thanks -- Joshua B Zimmerman The beginning of knowledge is the discovery of something we do

New laptop time, fighting with getting Simpl+ setup. When I first launched it I was able to change my font, colors, indenting, etc... Now, I cannot change anything in settings. The ‘Apply’ button

The OvrC Pro Hub is about $400 msrp, which includes lifetime support from SnapAV. Ryan Cunningham

Are there alternatives to Crestron lighting that can be controlled via WiFi? I have a 3-way for my can lights @ 600watts and want to control with my Crestron system but not wanting to spend an arm and

Thank you for the detailed response Oliver, I am grateful to finally have some insight on this subject. Also, I have been incorrectly using the phrase eventStream in place of alertStream. I have

We have been using a dual NIC pc running Widows IoT. For some application we use anydesk or VNC to access it and we can view video, access touch panels and other devices. TekTouchView Classroom