开云体育

We have one project were TSW-1052 and TS-1542 are installed and they behave the same. They randomly lockup, a reboot fixes the problem. My best guess was/is; must be a network issue (plus this puts

Cheers!

Also make sure Serial Login is disabled. Crestron@...> wrote:

We have had a few customers that accidentally put the remote into acquire mode by continually pressing the backlight button on and off. We just warn them about that.

It does. It negotiates what voltage and current the device needs. However, per the spec, the powered device has to accept both mode A and Mode B types of power delivery. The power sourcing equipment

Agreed. Isn't that what "802.3af compliant" means? It should negotiate what type of power to deliver when the device is connected...

As above, not 1 complaint or issue so far. Customers love the remote.

https://www.dropbox.com/s/hgk8mhvoznbvoya/EpsonPro-RS232.png?dl=0 https://www.dropbox.com/s/hgk8mhvoznbvoya/EpsonPro-RS232.png?dl=0

Does "KEY 03\r" not bring up the menu? Like I said, I didn't try those operations.

The SX80 module on the Crestron Applications site works fine. You need a USB-232 dongle to control the SX-20 via serial. The dongle should have the Prolific chipset. Check the notes on the module,

We have a TSW 1052 installed on a project that goes to a white screes does not respond to touches but does respond to text console. Sending a Restore makes it work again for about two days. TB did

That is the same File I have. Unfortunately the menu command is not listed,,so strange. Thanks for the reply.

did you ever find a solution. I'm on a job with a Cp3 and somfy ultra 50 motors and can't get any help on making the control pin out for 485

Haven’t had to replace batteries or gotten any complaints on any of the units we have out there. Pat M From: <Crestron@...> on behalf of "fueler1@... [Crestron]"

For those of you not on /r/Crestron or the Slack group, I've got a slick little Windows batch file you can download and run that will create 3 more contexts that you can run C3P/VTZ XPanels in.

We have a few jobs with HR150 remotes and are getting reports from clients about the remote locking up and needing the battery pulled to reset it. I wanted to ask if anyone else has seen or heard of

Thanks to Casey Roe the Crestron-SmartThings Integration code that I host on my Github now supports thermostats. You can connect a thermostat to a SmartThings hub and have full bi-directional

Just posted where it is in the Photos section https://groups.yahoo.com/neo/groups/Crestron/photos/albums/154486277 https://groups.yahoo.com/neo/groups/Crestron/photos/albums/154486277

Just a quick note to let people know that I've added a new entry to my blog, Topics in Home Automation. This blog entry is the second part in my four part series on automating large homes. The entry