开云体育

Yes. * You may need to reboot the unit's microprocessor? * Have you checked/insured that the unit has the latest firmware? * I have seen cases where units simply act in unusual ways and doing a Micro

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/SENSORSWITCH nLIGHT.zip Uploaded by : kevinzolitor

sent. I've sent this a few times on request... maybe I should just upload it to the files section. my only hesitation is that it isn't 'finished' and I'm not going to put any more time into it unless

Thanks for the response, I am not able to open the menu via a web browser. The IP address to the unit is 10.x.x.05. I can ping the unit through command prompt. Here is what I am not able to do with

If you know the IP address, simply enter that IP into your browser address bar and it should auto-magically take you the Denon's Menu. I assume you are, indeed, on the exact same Sub-Net and also

I am still having issues connecting to the AVR4806 through ethernet. I can ping the receiver but I cannot telnet into the unit or control it in debugger. Any help will be appreciated

I happen to find nmap. Found the IP

Hi, I would like to use the Ethernet port on the back of my AVR4806 for control. Here is my question... Do I need to set an IP address in the TC/IP client, I am sure that I do :)? If so, does anyone

The last few days I have been getting a connection error when sending a notification to my key. 2 series works fine... Anyone else?

Make sure the bit depth, sample rate, and channel setup (mono/stereo) are okay for your panel. I use these in every project for auto power off warnings (1 minute, 30 second, and 10 seconds).

Look on their website, they have an .exe that'll give you the string for any level, inc, dec, or preset for every channel. I think the URL might be printed on the protocol sheet that's in the box.

How much time after the doorbell is pressed do you return the system to its previous state? I figure it's very possible that the person at the door may push the doorbell more than once. I don't really

A new client has moved into an apartment that belonged to one of our longtime clients who has since traded up to a townhouse. The new client wants to ring the doorbell through the room speakers via

Went down today and swapped the CP3 for a QM-RMC, and email went straight through every time using the same program.

Chip, The 7500 I believe is a true DP Projector, the 4500 is their value product and I believe its a rebranded Vivitek (although not 100% certain), I do know that the base chassis is not DP. This is

This happens if you don't put a value in the File_Name_Prefix parameter. To stop it from happening put something in there. Someone also mentioned that strings weren't working properly because of an

If you pulse the FB of the join created in VTPro the entire audio file plays once regardless of how long you hold the button. If you hold it for longer it still only plays once through. If I want it

Are the displays or projectors HDCP compliant?

Hi all, I'm looking for the Ir code for the remote 1GD-IRAn. My learner, refuse to catch this remote signal. If somebody have this code please? Many Thanks

I found this module on this site but am getting the following error: FILE NAME PREFIX FAILED I left the prefix as it was which is \\NVRAM\\ Any idea what I might have done wrong? I know NVRAM works as