开云体育

Even though it is not officially supported you can also hook up a TesiraFORTE over USB to a Crestron RL and actually have some decent audio for Lync conferencing. I have a few systems here running

Its not a pain for people with experience. My comment was a recommendation for him based on his question. I personally wouldn't recommend an MLX-3 for that scenario, because the operation (IMO) sucks

Fairly simple when you know how I would imagine... Can someone point me in the right direction so I can put together a module that writes log file for debugging? All I really need to know is how to

The canonical solution is two analog signals, one to represent the input and another to represent the output. If both analogs are set (determine this with ACOMP2 or EQU symbols ANDed together), send a

My Samsung 5000 series LCD developed a fault where it would not power on or if it did, it took ages. The power supply had some under rated capacitors that had started to fail, replaced them and it has

I Sincerely appreciate the reply. I left one thing out. When selecting your source and then selecting the output device it needs to trigger one command to switch an Intelix HDMI switcher to the right

Was thinking some kind of eco settings, till you said you were pushing buttons on device. It's the ultimate eco setting - you can't use the TV! Does it behave the same with nothing connected?

The fields for the alternate port (no big deal) and the code are missing, and the save button never becomes enabled. This is driving me crazy.

Er, I can't add new systems on Crestron mobile running over ios 8.

A buffer? Crestron@...> wrote:

Whats the best way to route multiple sources such as laptop 1, Laptop 2 and PC to dual displays? I thought I could use an AND symbol, but it did not work and I think due to having to keep both inputs

Figured it out. "Run As Administrator" did the trick.

I like doing a delay and logic wave pulse combo. Signal drives delay, and the trig* (not the normal trigger!) of the LWP. Then the output of the LWP drives the reset of the delay. Then, when the

From what I see from the universal module, setting input commands look like this:

Client has a Samsung TV that's been installed for a few years. It is no longer responding to power on or power toggle (to on) when it's off - usually. (DMRMC100C which worked fine for 12-18 months). I

Thank you I'll try it out. I can already see that some commands for HDMI are missing so I'll probably have to create them manually into the module. Any chance someone has an updated version of this

Hi, I've searched the group and see that many have had success with MBP running Parallels. Any secret to getting Simpl or Toolbox to install? I get error after error. Stuff like Unable to register

Hi to all! Anyone has the IR Driver to control Dream Vision INTI 2 Projector? Thanks in advance

Hi, Thanks everybody for your advice! :-) I went down the lookup table lane. My first attempt didn't work out, as the array seems to have been too big... the 41x71 array was too much. SIMPL+ would

TesiraForte and Tesira Server is so much better than the Nexia/AudiaFlex lines. The subscribed feedback method is worth the cost of admission.