开云体育

The rs232 control "power link" has been worked out , and control of the system is now possible with just the rs232 kit The protocol is here http://www.domoticaforum.eu/viewtopic.php?f=68&t=6517

Jeff , I have a very nice Echo 360 module and methods to set up the appliance if you cannot find one that fully works. Mike Sent: Thursday, February 27, 2014 2:09 PM To: Crestron@...

Hi Neil, If that module is still around I would really appreciate a copy. Regards Mark

Hi, I was wondering if you guys have any recommendations for replacing my meridian 561 DSP. I am looking to replace it with a HDMI receiver (around $500); supporting Crestron control via TCP or RS232

Did you ever resolve this issue, I have the error -4002 with a writestringarray() on an AV3. works fine on 2series processor. I've added delays, and tried a few other things but no success yet. Did

Hi Jeff, Just sent you a pm. Neil

Sony 4K TV & 4K player (FMP-X1) Working with these for the first time, and whenever the TV and 4K player start up they open up the player's interface as an overlay on the current input. Is there a

Im a tard, I was trying to use windeal, thanks!

Neil, I was hoping the Echo module was up for grabs. I have a job with several at the moment. I have control but get errors when asking for status feedback. Also, there seems to be an authorization

Do you have toolbox installed? If not, try to install it and just after that, plug the learner. Em 27/02/2014 16:26, wretaudio@... escreveu:

I need the driver for the Crestron CSP-LIR-USB IR learner. Does anyone know where I can find it?

Is there any way to get non-stupid two-way communication between two D3 programs over a single EISC? I want to be able to react to digitals coming in and send digitals out, all on a single EISC.

Now that I think about it. My great grandfather was named Tom but he lived in Arkansas that I remember

My dad did grow up in Chicago though

Nope

any relation to Tom Walkinshaw (Chicago circa 1960's) ? _________________________________________ Ronald A. Bernstein, M.D. ________________________________ To: "Crestron@..."

I replaced three of them that the customer had already installed from Home Depot or wherever All I had to do was open the back cover and replace the radio chip with the crsstron one. Little pink

You should be talking to tech support, they're the only ones who can help you with something like this.

Yea I see now I would need a Zigbee version. Ive seen the Zwave ones out there and they are a bit cheaper then Crestron depending on where you look. The Zigbee version doesn't seem to be available at

I started a few threads about this in 2011 titled: Global Zone Control/Party Mode (4/17/11) Multi-Room/Global Zone Control/Party Mode Redux (8/17/11) They spawned a decent thread on the topic, I would