开云体育

No problems with CEC to speak of on all Sammies over the past couple of years. Had a minor issue with a UE74F8000 being controlled through an Anthem MRX-300 but some adjustment to timing when sending

depending on your general system design you can employ analog init/eq some ram to save your selections (or write to file) It all depends how fancy you want it to be. I have few systems where it is

Depends what you need to do growl might be the alternative way forward. Saludos, Regards, mit freundlichen Grü?en, Bart J. Podkowka CISoftware Mallorca www.cisoftware.eu<http://www.cisoftware.eu/>

I have used dropbox before, but now moved to ownCloud. Setup is easy and works a treat! Saludos, Regards, mit freundlichen Grü?en, Bart J. Podkowka CISoftware Mallorca

Why not rs-232? 1way works just fine. Saludos, Regards, mit freundlichen Grü?en, Bart J. Podkowka CISoftware Mallorca www.cisoftware.eu<http://www.cisoftware.eu/> Tel. +34 616273563, 971570971

Hi, We are trying to send to Xpanel two or three images at the same time to the same page using Serial Joing to a image object (dynamic graphics) We have seen that the first image loads very fast but

Has anyone integrated one of these? If so do you happen to know if any of the existing Integrated Partner modules will work with it or will I have to roll my own? Contractor failed to run a contact

Hi The last day we have had to reboot manually the Pro3. After rebooting we show the next message in error log: Exception 'Data Abort' (0x4): Thread-Id=0afe017a(pth=c0936bc8),

Remote/onsite: MBP 2.5ghz with 16GB Ram, fusion drive (not necessary but faster), parallels Desktop 9 running VM of Windows 7. Stable, pretty decently fast enough for the onsite load/test/debug.

i have a clsi-c6 (ilux) installed in one of our projects and the client experiences random ALL ON coming from the iLux. i've checked the program and can't figure out what causes the problem. any

The customer lost his remote, thanks!

In Toolbox enter the procesor’s IP address and then in the controlsubnet hostname field enter the hostname configured on the device you’re trying to reach. Isolation mode must be off for this

I suspect you're looking at the wrong version... there are two "non-Crestron" versions (Zigbee and Z-Wave) out there... I toyed with the idea of picking up the Zigbee version of the lock, suspecting

There were no quotes on the name originally but changing the name to something simpler resolved the issue. Thanks Jeremy and all who contributed -- Sebastian Marszalek

Bringing up this topic again... If I want to use one of these Yale locks, do I NEED to get it from Crestron, or can I get one from another vendor? Theyre double the price from Crestron. If so is there

?Hi Guys, I have a pro3 with Lan port configured with VPN access where all my biamp and amx switchers are residing. I can hit all the stuff on lan port by vpn access but can't seem to hit any touch

There is no released IP control. Why do you need to control it IP? IR control works perfect, and all QIP boxes use the same codes. If you don't want to put an emitter on the front, they support a rear

Are you sure on the CEC? Cause we have been using CEC (power on/off) with Samsung tvs for 2 years now with no issues, including brand new 8000 series models.

We have it in a number of installs (including my personal system) and it has been working fine since we made the fix posted above back in june. No problems. What issues were you having? I also noticed

Yeah...definitely check the cable/terminations - what kind are you using? (e.g. actual DM cable; shielded/unshielded Cat7a, 6, 5E). Also, are there any large but intermittent EMI sources in the area