开云体育

Just FYI, I just finished fighting the same type of issues. All of the sudden I had the same network problems with multiple, non-connected, systems. Come to find out, there were two main issues.

Most definitely will work. Use this setup for most of the conference rooms we install. -- Yours truly, Victor

Does anyone know if this will work... A dm wall plate and a dm scaler only. No processor. Set the scaler up for auto detect to allow vga or hdmi to be plugged in. Thoughts? Thanks Thom

Contact me on my personal mail Marselle001@... Crestron CAIP

The answer availble rg_2-series_control_systems.pdf in the crestron web site page 18/19. if your problem still exist let me know on my mail :marselle001@... Rabih Brahim Crestron CAIP

To Make the web xpanel work please follow the steps below: After Compile , open xpanel web folder and delete every file has 64 , mainly they are 2 files : XPanel64 XInit64 then it should work ! Rabih

hello every one, below is the model number of the IP camera Type: PTX model number is :PBACM - PT300 (3 MEGAPIXEL PTZ DOME CAMERA)

Good catch, I didn't see/read the "ST" part. Yep, must be the 1-way gateway.

Are you using static IPs in your IP Tables, or hostnames?

Have you tried disconnecting the panel from the network and then try to ping that address and the same for the DMPS? Check to see if you have an IP conflict.

Hi, Is there any programming required in Simpl Windows, should a keyboard or mouse be connected to the DGE1 with V12 panel? Also, is the VPG Glass Extender required in Simpl when using the V12 panel

Mark, it will work with the CNRFGWA-418. Ted

Good one, forgot about that. I have not had to mess with that setting in a while. There is other info really needed also. What DM firmare. Are you on your own network or the clients? What else is on

Thanks, but no go.

One thing to try, if you have not already, is to turn off auto negotiate in the Ethernet settings. Doesn't matter much which speed/duplex setting you use but it should be consistent. Tray Sent from my

Marc, As a last ditch effort, you might want to try charging the battery WITHOUT turning the panel on. Let it charge over night. Remove the power supply, and power up the panel on battery only. You

So i bought a URC MX980 and was thinking since the STRFGWX is 418mhz it would work as the receiver. Am i wrong? I cant drop it in on the symbol... WTH? and i have another gateway but yep it is a

Has anyone else experience weird network connection problems between Crestron equipment with recent updates? I have had DM Router issues, where it will show the DM Router as being offline until I

Ok, I tried it on a new PC and it shows the new design, but on the PC's which have already run the older design it doesn't update, so I guess this is an IE cache problem rather than Crestron - never

Tried that, both with the IE options and CCleaner to clear everything - still showing old design :o(