¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: Stuff stuck in mail queue

 

²Ñ²¹°ù°ì¡­.

I killed the messages ?in a failed attempt to get them out of the queue.
?
I had completely forgotten that the ¡®Messages¡¯ page allowed you to drop stuff out of queue. ?
?
Stuck no more!
Thanks Mark¡­
jerome - ve7ass
Re: Stuff stuck in mail queue

 

PK
?
P - Personal
K - Killed
?
It should not forward. Ask why was it killed?? WP messages should automatically be killed.? Something else?
?
?
In the web access to your node select Mail Mgmt, then Messages, Select the message. If there is any colored in block with your forwarding partners calls in them click on each box until it changes to no color.? Then click Save.? (Not Save Message)? No color is not queued.? Yellow is queued to that BBS.? Green is has been forwarded to that BBS.
?
If they were Killed they should have been removed from all queues, but stranger things have happened.
?
In Webmail, All Types, look for messages with status xN or x$.? (x could be P, B, or T)?? Those are the ones that should be queued to some BBS.? Maybe you have one or more of those?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Stuff stuck in mail queue

 

I have 4 messages that have no place to go and seem to be stuck in the queue. All show status PK. Two of them seem to trigger a forward cycle. How to get rid of messages in the queue?
jerome - ve7ass
?
Re: DXSpider and LinBPQ

 

¿ªÔÆÌåÓý

Hi Steve,

??? Telnet log do not say much:

23/02/2025 15:58:04 10 Outward Connect to 127.0.0.1? Port 9000
23/02/2025 15:58:04 10 Disconnected. Bytes Sent = 0 Bytes Received 7

and nothing the the BBS Log

I added call, alias and quality,

APPLICATION 4,DXC,ATT 2 127.0.0.1 9000 TELNET,VE2PKT-9,DXCPKT,254

now if I try to connect ve2pkt-9 I get:

?E2PKT-4:PKTXRP} Connected to VE2PKT-9??????????????????????????????????????????
*** Connected to DXC??????????????????????????????????????????????????????????? ?
login:????????????????????????????????????????????????????????????????????????? ?
*** DISCONNECTED?

I wonder if it's not my linux... I am running Ubuntu


I will keep digging.

Regards, Jean


???????????????????????

On 2025-02-23 14:36, Steve G7TAJ via groups.io wrote:

That is exactly how mine is, except with Stay added. Plus a call and alias and quality.
Check the telnet logs.
Check the dxspider logs.?

On Sun, 23 Feb 2025, 13:45 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:

Hi Steve,

??? I did try that:

APPLICATION 4,DXC,ATT 2 127.0.0.1 9000 telnet

it connect but disconnect right away, the login prompt do not show up.

Regards,

Jean

On 2025-02-23 03:26, Steve G7TAJ via wrote:
Jean
Yes, it just needs a telnet application to the ip / tcp port that dxspider uses.

73
Steve?

On Sat, 22 Feb 2025, 18:32 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:
Good day,

?????? Anyone here have connected DXSpider to LinBPQ as application with
OUT the need of Ax25Utils on the same machine?

--
73 de Jean,
VA2OM / VE2PKT

_._,_._,_
Groups.io Liens:

Vous recevez tous les messages envoy¨¦s ¨¤ ce groupe.

Voir/R¨¦pondre en ligne (#43245) | R¨¦pondre au groupe | R¨¦pondre ¨¤ l'exp¨¦diteur | Sujets | Nouveau sujet
Votre abonnement | Propri¨¦taire du groupe | Se d¨¦sabonner [ve2pkt@...]
Re: DXSpider and LinBPQ

 

That is exactly how mine is, except with Stay added. Plus a call and alias and quality.
Check the telnet logs.
Check the dxspider logs.?

On Sun, 23 Feb 2025, 13:45 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:

Hi Steve,

??? I did try that:

APPLICATION 4,DXC,ATT 2 127.0.0.1 9000 telnet

it connect but disconnect right away, the login prompt do not show up.

Regards,

Jean

On 2025-02-23 03:26, Steve G7TAJ via wrote:
Jean
Yes, it just needs a telnet application to the ip / tcp port that dxspider uses.

73
Steve?

On Sat, 22 Feb 2025, 18:32 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:
Good day,

?????? Anyone here have connected DXSpider to LinBPQ as application with
OUT the need of Ax25Utils on the same machine?

--
73 de Jean,
VA2OM / VE2PKT
Re: Changing IF Filter during forwarding connect script

 

Thanks John, that did it.
?
What surprises me is that I have been getting info from Glenn who also uses a 7300 and his seems to work with,
RADIO 7.100 USB D 2
?
Go figure....
?
?
Thanks Ken, that would have been an eventual solution.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Changing IF Filter during forwarding connect script

 

¿ªÔÆÌåÓý

For scanning with the IC-7300 I use the memory channels in the rig, and the CHxx command.? I can use different filters in the
memory settings of the radio if I need to.? Here is a forwarding script.

ATTACH 6
PAUSE 5
RADIO CHan05
BW500
C N0MR-1

Chan05 (IC-7300 memory channel 5) has the frequency, mode, filter, etc.

Not sure if this will help, let me know.

73, Ken
W9GM



On 2/23/2025 1:05 PM, John G8BPQ via groups.io wrote:

Try

RADIO 14.1065 USB 2 D

73, John

On 23/02/2025 17:42, Mark Taylor wrote:
On Thu, Feb 20, 2025 at 08:31 AM, John G8BPQ wrote:
You should be able to include an RADIO line in the connect script to set the filter.
?
John, I have tried everything I know, and tried to follow others example, but no luck.
?
I am using Windows version 6.0.24.64
?
These scanlines work fine and change the filter.
?
RADIO 1?
COM5 9600 ICOM IC7300 94
00:00 ? ? ? ? ? ? ? ? ? ;0600-1000
? 7,3.5945,USB,D,VT,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VW,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VN,A500M,F2 ? ? ;TPFN WL2K
? 7,7.112,USB,D,VN,F2 ? ? ? ? ? ? ;RACES
? 7,7.1032,USB,D,VN,A500M,F2 ? ? ;TPRFN
? 7,14.1065,USB,D,VN,A500M,F2 ?? ;TPRFN
****
?
When a forwading interval is reached the filter used is the one that is in use at the time the scan was interrupted. Therefore I could have either filter used for the connection.
?
This is a sample of a connect script in the forwarding record.
?
TIMES 0000-0159
ATTACH 5
PAUSE 3
RADIO 14.1065 D 2
BW500
PAUSE 3
C KD4WLE-3
?
This results in an error in the BBS log, "Sorry - Invalid Mode"
?
250223 16:50:08 <KD4WLE ? ?*** CONNECTED?
250223 16:50:08 >KD4WLE ? ?ATTACH 5
250223 16:50:08 <KD4WLE ? ?MONTTX:N5MDT-13} Ok
250223 16:50:08 ?KD4WLE ? ?Script PAUSE 3
250223 16:50:11 <KD4WLE ? ?Pause Ok
250223 16:50:11 >KD4WLE ? ?RADIO 14.1065 D 2
250223 16:50:11 <KD4WLE ? ?Sorry - Invalid Mode
250223 16:50:11 |KD4WLE ? ?KD4WLE Disconnected
?
?
I then changed the Radio line to RADIO 14.1065 USB D 2
The port would remain in a state of In Use by N5MDT-4 forever with no error logged.
?
On a terminal attached to the port RADIO 14.1065 USB D 2 results in a error Failed to set mode.
Entering RADIO 14.1065 USB does take the radio out of digital mode.
Entering RADIO 14.1065 USB D does not put it into digital mode.
?
So, what is the correct RADIO statement to set the frequency, USB, Digital, and filter 2?
?
?
The CAT command to set the mode and filter is in several places. These are the most likely.
Set data and filter:? 1A 06 01 xx???? Command is 1A 06.? Data is 01.? Filter is xx?? (01-03)
Set mode, data, filter:? 1A 26 00 01 01 xx ????? Command is 1A 26.? Selected VFO is 00. USB is 01. The Data on is 01 and filter is xx? (01-03)
?
?
Any help appreciated.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Changing IF Filter during forwarding connect script

 

¿ªÔÆÌåÓý

Try

RADIO 14.1065 USB 2 D

73, John

On 23/02/2025 17:42, Mark Taylor wrote:

On Thu, Feb 20, 2025 at 08:31 AM, John G8BPQ wrote:
You should be able to include an RADIO line in the connect script to set the filter.
?
John, I have tried everything I know, and tried to follow others example, but no luck.
?
I am using Windows version 6.0.24.64
?
These scanlines work fine and change the filter.
?
RADIO 1?
COM5 9600 ICOM IC7300 94
00:00 ? ? ? ? ? ? ? ? ? ;0600-1000
? 7,3.5945,USB,D,VT,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VW,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VN,A500M,F2 ? ? ;TPFN WL2K
? 7,7.112,USB,D,VN,F2 ? ? ? ? ? ? ;RACES
? 7,7.1032,USB,D,VN,A500M,F2 ? ? ;TPRFN
? 7,14.1065,USB,D,VN,A500M,F2 ?? ;TPRFN
****
?
When a forwading interval is reached the filter used is the one that is in use at the time the scan was interrupted. Therefore I could have either filter used for the connection.
?
This is a sample of a connect script in the forwarding record.
?
TIMES 0000-0159
ATTACH 5
PAUSE 3
RADIO 14.1065 D 2
BW500
PAUSE 3
C KD4WLE-3
?
This results in an error in the BBS log, "Sorry - Invalid Mode"
?
250223 16:50:08 <KD4WLE ? ?*** CONNECTED?
250223 16:50:08 >KD4WLE ? ?ATTACH 5
250223 16:50:08 <KD4WLE ? ?MONTTX:N5MDT-13} Ok
250223 16:50:08 ?KD4WLE ? ?Script PAUSE 3
250223 16:50:11 <KD4WLE ? ?Pause Ok
250223 16:50:11 >KD4WLE ? ?RADIO 14.1065 D 2
250223 16:50:11 <KD4WLE ? ?Sorry - Invalid Mode
250223 16:50:11 |KD4WLE ? ?KD4WLE Disconnected
?
?
I then changed the Radio line to RADIO 14.1065 USB D 2
The port would remain in a state of In Use by N5MDT-4 forever with no error logged.
?
On a terminal attached to the port RADIO 14.1065 USB D 2 results in a error Failed to set mode.
Entering RADIO 14.1065 USB does take the radio out of digital mode.
Entering RADIO 14.1065 USB D does not put it into digital mode.
?
So, what is the correct RADIO statement to set the frequency, USB, Digital, and filter 2?
?
?
The CAT command to set the mode and filter is in several places. These are the most likely.
Set data and filter:? 1A 06 01 xx???? Command is 1A 06.? Data is 01.? Filter is xx?? (01-03)
Set mode, data, filter:? 1A 26 00 01 01 xx ????? Command is 1A 26.? Selected VFO is 00. USB is 01. The Data on is 01 and filter is xx? (01-03)
?
?
Any help appreciated.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Changing IF Filter during forwarding connect script

 

On Thu, Feb 20, 2025 at 08:31 AM, John G8BPQ wrote:
You should be able to include an RADIO line in the connect script to set the filter.
?
John, I have tried everything I know, and tried to follow others example, but no luck.
?
I am using Windows version 6.0.24.64
?
These scanlines work fine and change the filter.
?
RADIO 1?
COM5 9600 ICOM IC7300 94
00:00 ? ? ? ? ? ? ? ? ? ;0600-1000
? 7,3.5945,USB,D,VT,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VW,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VN,A500M,F2 ? ? ;TPFN WL2K
? 7,7.112,USB,D,VN,F2 ? ? ? ? ? ? ;RACES
? 7,7.1032,USB,D,VN,A500M,F2 ? ? ;TPRFN
? 7,14.1065,USB,D,VN,A500M,F2 ?? ;TPRFN
****
?
When a forwading interval is reached the filter used is the one that is in use at the time the scan was interrupted. Therefore I could have either filter used for the connection.
?
This is a sample of a connect script in the forwarding record.
?
TIMES 0000-0159
ATTACH 5
PAUSE 3
RADIO 14.1065 D 2
BW500
PAUSE 3
C KD4WLE-3
?
This results in an error in the BBS log, "Sorry - Invalid Mode"
?
250223 16:50:08 <KD4WLE ? ?*** CONNECTED?
250223 16:50:08 >KD4WLE ? ?ATTACH 5
250223 16:50:08 <KD4WLE ? ?MONTTX:N5MDT-13} Ok
250223 16:50:08 ?KD4WLE ? ?Script PAUSE 3
250223 16:50:11 <KD4WLE ? ?Pause Ok
250223 16:50:11 >KD4WLE ? ?RADIO 14.1065 D 2
250223 16:50:11 <KD4WLE ? ?Sorry - Invalid Mode
250223 16:50:11 |KD4WLE ? ?KD4WLE Disconnected
?
?
I then changed the Radio line to RADIO 14.1065 USB D 2
The port would remain in a state of In Use by N5MDT-4 forever with no error logged.
?
On a terminal attached to the port RADIO 14.1065 USB D 2 results in a error Failed to set mode.
Entering RADIO 14.1065 USB does take the radio out of digital mode.
Entering RADIO 14.1065 USB D does not put it into digital mode.
?
So, what is the correct RADIO statement to set the frequency, USB, Digital, and filter 2?
?
?
The CAT command to set the mode and filter is in several places. These are the most likely.
Set data and filter:? 1A 06 01 xx???? Command is 1A 06.? Data is 01.? Filter is xx?? (01-03)
Set mode, data, filter:? 1A 26 00 01 01 xx ????? Command is 1A 26.? Selected VFO is 00. USB is 01. The Data on is 01 and filter is xx? (01-03)
?
?
Any help appreciated.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: DXSpider and LinBPQ

 

¿ªÔÆÌåÓý

Hi Steve,

??? I did try that:

APPLICATION 4,DXC,ATT 2 127.0.0.1 9000 telnet

it connect but disconnect right away, the login prompt do not show up.

Regards,

Jean

On 2025-02-23 03:26, Steve G7TAJ via groups.io wrote:

Jean
Yes, it just needs a telnet application to the ip / tcp port that dxspider uses.

73
Steve?

On Sat, 22 Feb 2025, 18:32 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:
Good day,

?????? Anyone here have connected DXSpider to LinBPQ as application with
OUT the need of Ax25Utils on the same machine?

--
73 de Jean,
VA2OM / VE2PKT
Re: RF forwarding times

 

¿ªÔÆÌåÓý

On 2/22/25 12:10, Jim - KI0BK via groups.io wrote:
I¡¯m wondering what are valid values range for the Enable forwarding/Request reverse fields?
And what other sysops set these to when doing RF forwarding?
TIA
Jim KI0BK

Hi, Jim:

Valid range values are, at least, 300 to 9999, as I have used them without seeing a failure.
I have 'Send new messages without waiting for poll timer' enabled so,
I assume that may initiate staggered start forwarding times.

What values of Enable Forwarding and Request Reverse delay minutes are used when RF forwarding?
It depends.
It depends on band and propagation and channel occupancy.
I feel that it is common to set repeat Enable Forwarding RF connections times to 1 hour.
I do not recommend enabling a Request Reverse on a popular or active or congested RF channel.

In one instance, I see only 5 other BBSs on a 40 meter channel.
I do not see any other automatically controlled digital stations in this waterfall bandpass.

On an unpopular inactive non-congested channel and
because NVIS connection start and end times on 40 meters vary seasonally,
I use the Request Reverse field with 2 HF neighbors and adjust the TIMES to start ~1 hour before
the last successful connection times and 1 hour after the last.
I hear 5 other BBSs on this 40 meter mode, so I feel that I am not generating significant channel contention.

73, Chuck
Re: BPQ32.cfg for APRS only

 

Hi John,
First off, let me say thanks for writing such a great piece of software!
The more I learn, the more I like BPQ32.

My APRS system is working great now.
I will take your advice and switch to QtSoundModem.

Thanks also to Jeff, Mark, and John W6JMK for taking the time to help me out.
I really appreciate it!

73,
Alan, N8WQ

On 2/21/25 12:08, John G8BPQ via groups.io wrote:
I would suggest using QtSoundModem rather than UZ7HO's version.



Configure it to use the KISS interface, not the AGW interface.

A typical BPQ port config is

PORT
?ID=QtSM APRS
?TYPE=ASYNC
?PROTOCOL=KISS
?IPADDR=127.0.0.1
?TCPPORT=8100
?CHANNEL=A
?MAXFRAME=4
?FULLDUP=0
?FRACK=4000
?RESPTIME=3000
?RETRIES=10
?PACLEN=236
?TXDELAY=500
?SLOTTIME=100
?PERSIST=64
ENDPORT

Set TCPPORT to the KISS port set in the QtSM configuration

A minimal APRS config is

APRSDIGI
?APRSCALL=XXXXXX
?Symbol=-
?Symset=/

?StatusMsg=IGate(IO92KX)

?MaxStations=1000
?MaxAge=1440
?BeaconInterval=30
?APRSPATH 1=APRS,WIDE1-1,WIDE2-1

?TraceCalls=WIDE
?DigiCalls=WIDE1-1

?MaxTraceHops=2
?MaxFloodHops=2
?ReplaceDigiCalls

?; Speciy LAT/LONG?in standard APRS Format (Degrees, Minutes, Decimal fraction of minute

LAT=DDMM.mmN
LON=DDDMM.mmW

; These are for connecting to APRS-IS

?ISHost=euro.aprs2.net??? ; a host in the USA may be more appropriate
?ISPort=14580
?ISPasscode=xxxxx

****








On 21/02/2025 00:25, Alan N8WQ via groups.io wrote:
Gang, I have been using BPQ32 for about four months now but I still cannot crack the code for running a APRS station. I have been experimenting with creating/editing my BPQ32.cfg file but still can not get it working. Can someone provide me a BPQ32.cfg template that I can use with my UZ7HO Soundmodem for just one RF port on 144.390? I also want to add the digipeater function to my local area if possible. I live in Pike County Ohio.

Once I get my APRS station up and running I plan on slowly adding more ports and functionality to my packet station.
Thanks in advance for you help!

73,
Alan, N8WQ
Re: DXSpider and LinBPQ

 

Jean
Yes, it just needs a telnet application to the ip / tcp port that dxspider uses.

73
Steve?

On Sat, 22 Feb 2025, 18:32 Jean L¨¦tourneau via , <ve2pkt=[email protected]> wrote:
Good day,

?????? Anyone here have connected DXSpider to LinBPQ as application with
OUT the need of Ax25Utils on the same machine?

--
73 de Jean,
VA2OM / VE2PKT
Re: APRS without digi/iGate

 

If it doesn't see to work open BPQAPRS.exe at the same time, or add a lie to your cfg to open it.
?
RUN BPQAPRS.EXE
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: APRS without digi/iGate

 

¿ªÔÆÌåÓý

Sweet. ?Thanks! ?I¡¯ll give this a shot?

Adam, KM7N

On Feb 22, 2025, at 11:13, Mark Taylor <mtaylor@...> wrote:

?
Yes.? Be sure and use a different call-ssid than your existing.
?
APRSDIGI
?APRSCall=KM7N-15
?StatusMsg=Tucson, AZ
?Symbol=& ? ? ? ?; Icon, a Black Diamond, to display for station.? Change this to a house, perhaps or remove these three lines.
?Symset=I ? ? ? ?; This is a "I" in a Black Diamond.

APRSPath 7= ? ? ? ? ? ? ? ? ? ; use a valid port... don't send to this port but it will look for valid aprs packets.
Digimap 7= ? ? ? ?; Don't digi packets received on port 7

?LAT=3005.05N ? ? ? ?; Must be in standard APRS Format (ddmm.mmN/S)
?LON=11139.68W ? ? ? ?; Must be in standard APRS Format (dddmm.mmE/W)

; ISHost= should be selected from 'Rotates' at www.aprs2.net suitable for your country.
?ISHost=noam.aprs2.net ? ? ? ?; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?ISPort=14580 ? ? ? ?; Normal port for a filtered feed
?ISPasscode=4065 ?? ; If you don't already have a passcode G8BPQ can issue you one.
*** ? ? ? ? ? ? ? ? ? ?;Denotes end of APRSDIGI configuration
?
?
Maybe this will work....
The port is a valid port but does not do anything. It will still look for aprs packets on this port but will not send anything to it or to APRSIS
You could try commenting out some lines one at a time to see if you get any errors.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
DXSpider and LinBPQ

 

Good day,

????? Anyone here have connected DXSpider to LinBPQ as application with OUT the need of Ax25Utils on the same machine?

--
73 de Jean,
VA2OM / VE2PKT
Re: APRS without digi/iGate

 

Yes.? Be sure and use a different call-ssid than your existing.
?
APRSDIGI
?APRSCall=KM7N-15
?StatusMsg=Tucson, AZ
?Symbol=& ? ? ? ?; Icon, a Black Diamond, to display for station.? Change this to a house, perhaps or remove these three lines.
?Symset=I ? ? ? ?; This is a "I" in a Black Diamond.

APRSPath 7= ? ? ? ? ? ? ? ? ? ; use a valid port... don't send to this port but it will look for valid aprs packets.
Digimap 7= ? ? ? ?; Don't digi packets received on port 7

?LAT=3005.05N ? ? ? ?; Must be in standard APRS Format (ddmm.mmN/S)
?LON=11139.68W ? ? ? ?; Must be in standard APRS Format (dddmm.mmE/W)

; ISHost= should be selected from 'Rotates' at www.aprs2.net suitable for your country.
?ISHost=noam.aprs2.net ? ? ? ?; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?ISPort=14580 ? ? ? ?; Normal port for a filtered feed
?ISPasscode=4065 ?? ; If you don't already have a passcode G8BPQ can issue you one.
*** ? ? ? ? ? ? ? ? ? ?;Denotes end of APRSDIGI configuration
?
?
Maybe this will work....
The port is a valid port but does not do anything. It will still look for aprs packets on this port but will not send anything to it or to APRSIS
You could try commenting out some lines one at a time to see if you get any errors.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Multi-line comment

 

¿ªÔÆÌåÓý

Thanks Mark, that was it!
?As many times as I tried fixing it my old mind just didn't see it..

73? John?? wb4moz

On 2/22/2025 12:22 PM, Mark Taylor wrote:

Your PORTNUM 2 is correct.? From there is appears to be a mismatch with the number of /*? */? that you have.? I think in the wrong order BPQ would ignore them.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Multi-line comment

 

Your PORTNUM 2 is correct.? From there is appears to be a mismatch with the number of /*? */? that you have.? I think in the wrong order BPQ would ignore them.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: RF forwarding times

 

I would not normally check Request Reverse any time as it increases traffic.? If the other station does not have a forwarding record to you then that might be a time to use that.?? I believe that any time you conect messages will be both sent and received.
?
I connect no more frequently than once per hour.? And, I stagger those times by 10 minutes for each RF connection. Even that may be cutting it close if you have slow connections or ultiple ELSE clauses.
?
I do not know min or max values for those fields.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
721 - 740 of 43721