On Thu, Feb 20, 2025 at 08:31 AM, John G8BPQ wrote:
You should be able to include an RADIO line in the connect script to set the filter.
?
John, I have tried everything I know, and tried to follow others example, but no luck.
?
I am using Windows version 6.0.24.64
?
These scanlines work fine and change the filter.
?
RADIO 1?
COM5 9600 ICOM IC7300 94
00:00 ? ? ? ? ? ? ? ? ? ;0600-1000
? 7,3.5945,USB,D,VT,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VW,A2000M,F1 ? ? ;WL2K
? 7,3.5945,USB,D,VN,A500M,F2 ? ? ;TPFN WL2K
? 7,7.112,USB,D,VN,F2 ? ? ? ? ? ? ;RACES
? 7,7.1032,USB,D,VN,A500M,F2 ? ? ;TPRFN
? 7,14.1065,USB,D,VN,A500M,F2 ?? ;TPRFN
****
?
When a forwading interval is reached the filter used is the one that is in use at the time the scan was interrupted. Therefore I could have either filter used for the connection.
?
This is a sample of a connect script in the forwarding record.
?
TIMES 0000-0159
ATTACH 5
PAUSE 3
RADIO 14.1065 D 2
BW500
PAUSE 3
C KD4WLE-3
?
This results in an error in the BBS log, "Sorry - Invalid Mode"
?
250223 16:50:08 <KD4WLE ? ?*** CONNECTED?
250223 16:50:08 >KD4WLE ? ?ATTACH 5
250223 16:50:08 <KD4WLE ? ?MONTTX:N5MDT-13} Ok
250223 16:50:08 ?KD4WLE ? ?Script PAUSE 3
250223 16:50:11 <KD4WLE ? ?Pause Ok
250223 16:50:11 >KD4WLE ? ?RADIO 14.1065 D 2
250223 16:50:11 <KD4WLE ? ?Sorry - Invalid Mode
250223 16:50:11 |KD4WLE ? ?KD4WLE Disconnected
?
?
I then changed the Radio line to RADIO 14.1065 USB D 2
The port would remain in a state of In Use by N5MDT-4 forever with no error logged.
?
On a terminal attached to the port RADIO 14.1065 USB D 2 results in a error Failed to set mode.
Entering RADIO 14.1065 USB does take the radio out of digital mode.
Entering RADIO 14.1065 USB D does not put it into digital mode.
?
So, what is the correct RADIO statement to set the frequency, USB, Digital, and filter 2?
?
?
The CAT command to set the mode and filter is in several places. These are the most likely.
Set data and filter:? 1A 06 01 xx???? Command is 1A 06.? Data is 01.? Filter is xx?? (01-03)
Set mode, data, filter:? 1A 26 00 01 01 xx ????? Command is 1A 26.? Selected VFO is 00. USB is 01. The Data on is 01 and filter is xx? (01-03)
?
?
Any help appreciated.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
