开云体育

Hi John, As always you are spot on, I worked this up into my config yesterday and works well. I am off to try to find more docs on the new "Radio" stuff.?? I want to add the other radio to the mix

Yes, the calling station is licensed The test was to have the calling station send a message with an 18K attachment which averaged 21K BPS. Then the message was forwarded to the calling station who

The licence check is applied to the calling station. Does the calling station have a licence? 73, John

I am running a fully licensed VARA FM.? The license is for AF9W. The RMS call is AF9W-10.? The VARA FM says it is running Wide all the time except when someone connects using Narrow mode.? I am

That might suggest it in running unlicenced. Are you sure you are using the call that is registered? With VARA HF you get a message in the status window showing if it is registered but I'm not sure if

Isn’t FM9600 is setting a maximum speed limit in this config? It may be a suspect. I’d remove it and see if it makes a difference.

BBS forwarding and lengthy node lists are frowned upon.Complete details at: www.Network105.org?Prof. Chris Lancewww.ww2bsa.orgwww.EastNetPacket.comwww.Network105.orgRadio Station ManagerMount

We have been doing some testing with VARA FM.? One station is running Winlink Express with VARA Wide on Windows 10.? I have a BPQ32 6.0.23.1 running on Windows 10 with VARA FM 4.2.3. When we send a

I run on 20m during the day and 40m at night. Just trying to follow propagation. Lots of us swap our nodes between those two frequencies. BBS is fine on those frequencies, that's most of what you will

Lee, Here's what I have at about the same time. Ken, W9GM 220709 16:45:26 |K5DAT-1?? Incoming Connect from K5DAT 220709 16:45:26 >K5DAT-1?? [BPQ-6.0.23.1-B1FWIHJM$] 220709 16:45:26 >K5DAT-1 220709

Mystery solved. For those that look at this in the future my app lines are now: APPLICATION 1,BBS,,KO4YAW-1,YAWBBS,255 APPLICATION 2,CHAT,,KO4YAW-4,YAWCHT,255 APPLICATION 3,RMS,C 1

My app lines: APPLICATION 1,RMS,C 1 CMS,KO4YAW-10,,0 APPLICATION 1,BBS,,KO4YAW-1,,0 APPLICATION 2,CHAT,,KO4YAW-4,,0 From: "[email protected]" <[email protected]> on behalf of John G8BPQ

The problem is probably your APPLICATION lines. What do you have? 73, John

KISS ports don't support a RIGCONTROL section. I find it easier to let bpq control the radio, as this simplifies sharing a radio with several modems. I run WinRPR and QtSM, and sometimes VARA and/or

Hello, I have an issue with one remote BBS where after completion of forwarding, the message doesn't get labeled "PF" in my BBS - remains "PN". This has been happening through multiple versions of BPQ

Hi, Is this still accurate for KISS ports? /g/bpq32/message/33635 May need to find an alternative. 73 N9SEO

Forgot to add the screen print

Hello All! I am making progress…. Things are talking together. But, something isn’t working right. When I log in via telnet or from the telnet window on the browser and type “BBS” on the

Hi, I am experimenting with WinRPR and bpq.?? I think that I somehow got the rigcontrol messed up.? BPQ is wintel rev 6.0.23.1 June 2022. PTT works fine with QTSM and hamlib here so the server

Thanks Chris! I may be confused (take it easy on packet nebie here), but I read someplace in that groups rules that packet BBS’s are not supposed to be on that net? Or is it just BBS to BBS