Hi,
I am experimenting with WinRPR and bpq.?? I think that I somehow got the rigcontrol messed up.? BPQ is wintel rev 6.0.23.1 June 2022.
PTT works fine with QTSM and hamlib here so the server (rigctld.exe) is running fine.? However the following port config does not key the radio, so maybe someone has some insight as to what I have wrong.? Rig is an IC-7100, Serial ports are managed with Com0com and win4icom suite.?? So I could assign another comport pair and use the icom CI-V but for now hamlib was the shortest path on everything else modem wise here.
PORT
? PORTNUM=4
? ID=20m RPR test
? TYPE=ASYNC
? PROTOCOL=KISS
? IPADDR=127.0.0.1
? TCPPORT=8201
? KISSOPTIONS=NOPARAMS
? CHANNEL=A
? QUALITY=0
? MINQUAL=0
? FRACK=6000
? RESPTIME=1500
? RETRIES=10
? MAXFRAME=1
? PACLEN=60
? UNPROTO=ID
? BCALL=N9SEO
? L3ONLY=0
? DIGIFLAG=0
? DIGIPORT=0
? USERS=3
? CONFIG
RIGCONTROL
?HAMLIB 127.0.0.1:4532
****
ENDPORT
WinRPR config
[PROGRAM]
; WATERFALL 0 = COLORED, 1 = BW "inverted", 2 = BW "normal"
WATERFALL:0
; FOOTPRINT OF WinRPR: 0=normal, 1=small
SMALLSIZE:0
[END]
[AUDIO]
; Audio Device Number, starting at 1
RX:1
TX:1
[END]
[PTT]
; PTT COM number
PTTPORT:0
; Set to 1 if DTR should be used instead of RTS
USEDTR:0
[END]
[COMOUT]
; Set it to a COM port generated by com0com tool
COMOUTPORT:0
[END]
[TCP]
TCPPORT:8201
[END]
[TNC]
; # is used as ESC character
#s 0
; set mycall!!!
#i N9SEO-15
; set transmit level!!!
#%xr 400
#%D0 ; Only use Robust Packet
#S 1 ; Set channel to 1
#R 0 ; Digi off
#F 6 ; Frack 6 seconds
#N 10 ; Retries 10
#O 1 ; Maxframe 1
#P 16 ; Persist 16
#T 10 ; TX delay 100mS
#W 30 ; Slottime 30
#@T2 150 ; Resptime 1.5 seconds
#@T3 18000 ; T3
#%B R600 ; R600 used for UI
; activate KISS, if required
#@K
[END]
Thanks in advance for your time and comments.
73 Kayne
N9SEO
