I do not understand the function of this hierarchical address

#43477

开云体育

HAMGATEME.N2NOV.#RICH.NY.USA.NOAM

73, Chuck

Re: Problem with template

#43476

开云体育

Could you send me a copy of the form so I can try it here to see what is going wrong?

Thanks,
John

On 15/03/2025 19:42, claude F4IKH via groups.io wrote:

Show quoted text

Hi dear john

?

I've tried using custom templates but I've found a few problems:

the first:

I load an image into my template with the following code

<img src="{FormFolder}inc/logo_63.png" alt="Logo 63" width="60%" />

The text is converted into a url that seems correct but the image doesn't appear. If I copy/paste the link into the browser, the browser tries to save a file

?

the second problem:

When viewing a message with the template, the message is displayed in the template but the tag {FormFolder} is not interpreted and replaced by the required part of url

?

These templates work perfectly with winlink express 1.7.

?

Best 73s

Claude F4IKH

Force forward issue

#43475

After setting up a new bbs partner, i tried the start forward from the drop down in the Actions tab, but nothing happened.

?

Is this a known issue

?

Add new user has been setup an flagged as bbs, Forwarding script has been setup, no times in script.

?

Ray N3HYM

Problem with template

#43474

Hi dear john

?

I've tried using custom templates but I've found a few problems:

the first:

I load an image into my template with the following code

<img src="{FormFolder}inc/logo_63.png" alt="Logo 63" width="60%" />

The text is converted into a url that seems correct but the image doesn't appear. If I copy/paste the link into the browser, the browser tries to save a file

?

the second problem:

When viewing a message with the template, the message is displayed in the template but the tag {FormFolder} is not interpreted and replaced by the required part of url

?

These templates work perfectly with winlink express 1.7.

?

Best 73s

Claude F4IKH

Re: How to install QtTerm on Ubuntu 24.04

#43473

开云体育

Yes, that does assume knowledge of Qt development.

I started with a new install? of Linux Mint 22 and had to run

sudo apt install git libqt5serialport5-dev qtmultimedia5-dev
?git clone
cd QtTermTCP
qmake
make

I'll update the documentation.

73, John

On 15/03/2025 18:15, Kevin via groups.io wrote:

Show quoted text

Hi Linux Wizards

?

Trying to install QtTerm on Ubuntu 24.04 come up against a brick wall

?

Not the greatest of instructions see below

?

If you need to run on other Linux or similar systems you may be able to compile from source. Download , unzip and run qmake then make?

?

A proper set of instructions would be nice

?

Kevin G7UXW

io83

?

NNNN

Re: How to install QtTerm on Ubuntu 24.04

#43472

开云体育

Hello Kevin,

I found John's instructions at to be quite useful. Regardless if you are unfamiliar with linux and manual compiles it is typically not necessary to compile from source. Simply download the appropriate executable from John's repository at .

There I see x86 32bit QtTermTCP and x64 64bit QtTermTCP64 both at recent version 0.0.0.78 which should work on Ubuntu AMD / Intel based systems.

No package type install needed. Just place the binary in a subdirectory and launch it. Configuring options under the Setup tab will create and / or update the config file in the same subdirectory.

If you have reason to compile from source then there are a number of dev and other dependencies that must be installed prior to compiling.

73 de Rich WA3WLH

On 3/15/25 14:15, Kevin via groups.io wrote:

Show quoted text

Hi Linux Wizards

?

Trying to install QtTerm on Ubuntu 24.04 come up against a brick wall

?

Not the greatest of instructions see below

?

If you need to run on other Linux or similar systems you may be able to compile from source. Download , unzip and run qmake then make?

?

A proper set of instructions would be nice

?

Kevin G7UXW

io83

?

NNNN

How to install QtTerm on Ubuntu 24.04

#43471

Hi Linux Wizards

?

Trying to install QtTerm on Ubuntu 24.04 come up against a brick wall

?

Not the greatest of instructions see below

?

If you need to run on other Linux or similar systems you may be able to compile from source. Download , unzip and run qmake then make?

?

A proper set of instructions would be nice

?

Kevin G7UXW

io83

?

NNNN

Re: Does BPQ-BBS Whitepages support hierarchical addresses longer than 6 characters?

#43470

It should now discard any record with an address longer than 6. This was recently fixed (in version 6.0.24.56).

73, John

Show quoted text

On 15/03/2025 02:55, Chuck Gelm wrote:
On 250313 HAMGATEME/I @ HAMGATEME.N2NOV.#RICH.NY.USA.NOAM zip ? ME ?

73, Chuck

Does BPQ-BBS Whitepages support hierarchical addresses longer than 6 characters?

#43469

On 250313 HAMGATEME/I @ HAMGATEME.N2NOV.#RICH.NY.USA.NOAM zip ? ME ?

73, Chuck

Re: Adding port number in BBS log

#43468

There is noting in the log. Of the 5-6 stations 2 of them start around 1100, the rest nothing.

?

Even the Vara log shows nothing from 0300 until 1100 except for one incoming connection that was successful.

?

Still looking.? I am thinking a port locks up, but the BPQ BBS log normally show when a port is in use and the forwarding fails so I am still looking...

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

Re: BBS Error not connecting on all our linbpq nodes with latest 2 versions.

#43467

开云体育

There are a couple of messages saying "KISS client application 0 has gone away." This suggests that BPQ may be closing. Is there anything on the console or debug log to indicate BPQ is restarting?

73,
John

On 14/03/2025 19:26, Heber Soto, NP4JN via groups.io wrote:

Show quoted text

We are running in KISS mode.? Here is a debug from Direwolf:

?

direwolf -d n

Ready to accept KISS TCP client application 1 on port 8001 ...

<<< Data frame from KISS client application, port 0, total length = 38
? 000: ?c0 00 ae a0 68 9e 90 40 f4 9c a0 68 94 94 40 75 [email protected]..@u
? 010: ?bf 82 80 00 10 02 02 00 21 03 03 22 a4 86 06 02 ?........!.."....
? 020: ?08 00 08 01 07 c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?......
[0L] NP4JJ-10>WP4OH-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

<<< Data frame from KISS client application, port 0, total length = 38
? 000: ?c0 00 ae a0 68 9e 90 40 f4 9c a0 68 94 94 40 75 [email protected]..@u
? 010: ?bf 82 80 00 10 02 02 00 21 03 03 22 a4 86 06 02 ?........!.."....
? 020: ?08 00 08 01 07 c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?......
[0L] NP4JJ-10>WP4OH-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JN audio level = 3(1/1) ? [NONE] ? ____|||||
[0.6] NP4JN>BBS7:(SABM cmd, p=1)

>>> Data frame to KISS client application, port 0, total length = 18
? 000: ?c0 00 84 84 a6 6e 40 40 e0 9c a0 68 94 9c 40 61 ?.....n@@...h..@a
? 010: ?3f c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??.

<<< Data frame from KISS client application, port 0, total length = 18
? 000: ?c0 00 9c a0 68 94 9c 40 60 84 84 a6 6e 40 40 e1 ?....h..@`...n@@.
? 010: ?73 c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?s.

KISS client application 0 has gone away.

direwolf -d k

[0L] BBS7>NP4JN:(UA res, f=1)

[0.5] NP4JN>BBS7:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)<0x0d>

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? __|||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? __|||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

Ready to accept KISS TCP client application 1 on port 8001 ...
[0L] NP4JJ-10>KP3A-5:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7
[0L] NP4JJ-10>WP4QNQ-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

KP3A-5 audio level = 10(1/1) ? [NONE] ? |||||||__
[0.3] KP3A-5>NP4JJ-10:(FRMR res, f=1)<0xbf>0<0x00>

WP4QNQ-10 audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] WP4QNQ-10>NP4JJ-10:(XID res, f=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
XID error: Expected Synchronous Tx to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7
[0L] NP4JJ-10>KP3A-5:(SABM cmd, p=1)
[0L] NP4JJ-10>WP4QNQ-10:(SABM cmd, p=1)

WP4QNQ-10 audio level = 3(1/1) ? [NONE] ? __|||||||
[0.5] WP4QNQ-10>NP4JJ-10:(UA res, f=1)

KP3A-5 audio level = 3(1/1) ? [NONE] ? _|||||___
[0.3] KP3A-5>NP4JJ-10:(UA res, f=1)

NP4JN audio level = 3(1/1) ? [NONE] ? __|_|||||
[0.5] NP4JN>NP4JJ-11:(SABM cmd, p=1)

KISS client application 0 has gone away.

[0L] NP4JJ-11>NP4JN:(UA res, f=1)

?

Re: Adding port number in BBS log

#43466

开云体育

Yes, interval timers start when the BBS starts and run at the same interval even if incoming connects are made. So if you start at 0615 and have 3600 seconds it should try at? 0715, 0815 etc. It won't try if the BBS is already connected but otherwise you should always see the connect attempt in the BBS log even if, for instance, the port is in use or you are outside all TIMES blocks so the connect immediately fails. Is there nothing at all in the BBS log when the connect should take place?

73, John

On 14/03/2025 18:34, Mark Taylor wrote:

Show quoted text

On Fri, Mar 14, 2025 at 01:16 PM, John G8BPQ wrote:

Are you asking for this info on outward connects as well?

?

Yes, please.? Trying to diagnose this...

?

Although I have interval times set randomly between 3600-4200 on my HF ports I have 5 hours of no connection attempts from 0600 to 1100 (UTC) and cannot figure out why. All works normal on the AXIP ports.

It is a Windows 10 machine that reboots at 0530 utc and start mail at 0615.

I use 0000-2359 in most of the Times boxes, and Times xxxx-yyyy in the scripts. All scripts have multiple times blocks in them.

?

I am assuming Interval timers start upon start of BPQMail. Do they reset any other time than a connect attempt? Do they reset anytime a forwarding record is changed, or upon incoming connection from that station?? Or any other time?

?

?

Anything wrong obvious to you?

?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

Re: BBS Error not connecting on all our linbpq nodes with latest 2 versions.

#43465

We are running in KISS mode.? Here is a debug from Direwolf:

?

direwolf -d n

Ready to accept KISS TCP client application 1 on port 8001 ...

<<< Data frame from KISS client application, port 0, total length = 38
? 000: ?c0 00 ae a0 68 9e 90 40 f4 9c a0 68 94 94 40 75 [email protected]..@u
? 010: ?bf 82 80 00 10 02 02 00 21 03 03 22 a4 86 06 02 ?........!.."....
? 020: ?08 00 08 01 07 c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?......
[0L] NP4JJ-10>WP4OH-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JN audio level = 3(1/1) ? [NONE] ? ____|||||
[0.6] NP4JN>BBS7:(SABM cmd, p=1)

>>> Data frame to KISS client application, port 0, total length = 18
? 000: ?c0 00 84 84 a6 6e 40 40 e0 9c a0 68 94 9c 40 61 ?.....n@@...h..@a
? 010: ?3f c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??.

<<< Data frame from KISS client application, port 0, total length = 18
? 000: ?c0 00 9c a0 68 94 9c 40 60 84 84 a6 6e 40 40 e1 ?....h..@`...n@@.
? 010: ?73 c0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?s.

KISS client application 0 has gone away.

direwolf -d k

[0L] BBS7>NP4JN:(UA res, f=1)

[0.5] NP4JN>BBS7:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)<0x0d>

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? __|||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] NP4JN>BBS7:(RR cmd, n(r)=0, p=1)

Ready to accept KISS TCP client application 1 on port 8001 ...
[0L] NP4JJ-10>KP3A-5:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7
[0L] NP4JJ-10>WP4QNQ-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

KP3A-5 audio level = 10(1/1) ? [NONE] ? |||||||__
[0.3] KP3A-5>NP4JJ-10:(FRMR res, f=1)<0xbf>0<0x00>

WP4QNQ-10 audio level = 3(1/1) ? [NONE] ? ___||||||
[0.5] WP4QNQ-10>NP4JJ-10:(XID res, f=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
XID error: Expected Synchronous Tx to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7
[0L] NP4JJ-10>KP3A-5:(SABM cmd, p=1)
[0L] NP4JJ-10>WP4QNQ-10:(SABM cmd, p=1)

WP4QNQ-10 audio level = 3(1/1) ? [NONE] ? __|||||||
[0.5] WP4QNQ-10>NP4JJ-10:(UA res, f=1)

KP3A-5 audio level = 3(1/1) ? [NONE] ? _|||||___
[0.3] KP3A-5>NP4JJ-10:(UA res, f=1)

NP4JN audio level = 3(1/1) ? [NONE] ? __|_|||||
[0.5] NP4JN>NP4JJ-11:(SABM cmd, p=1)

KISS client application 0 has gone away.

[0L] NP4JJ-11>NP4JN:(UA res, f=1)

?

Re: BBS Error not connecting on all our linbpq nodes with latest 2 versions.

#43464

开云体育

Can you get a trace of what BPQ sends to DIrewolf?

Is Direwolf running in KISS or AGW mode?

Thanks,
John

On 14/03/2025 18:10, Heber Soto, NP4JN via groups.io wrote:

Show quoted text

This is occurring using RF only not telnet.

?

We are calling the node first it will respond but when we issue a command like "?" or "BBS" it would disconnect.

?

We are also call the BBS directly by its Call Sign or Alias same result it would just disconnect.

?

We are trying direct connect C call.

?

The following traffic was originated where I connected to a node via IP telnet then from the node issued C 2 !WP4QNQ-11 to the BBS:

?

[0L 14:07:30] WP4QNQ-11>NP4JN:(UA res, f=1)

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:07:39] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:41] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:07:44] NP4JN>WP4QNQ-11:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)?<0x0d>

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:07:46] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:51] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _||||||__
[0.3 14:07:54] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _|||||___
[0.3 14:07:58] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:08:01] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? ||||||___
[0.2 14:08:05] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

RNCDOR audio level = 28(12/14) ? [NONE] ? |||||____
[0.2 14:08:08] RNCDOR>APN382,WIDE2-1:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:11] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? |||||||__
[0.3 14:08:12] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:16] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:08:20] NP4JN>WP4QNQ-11:(DISC cmd, p=1)

RNCDOR audio level = 29(12/14) ? [NONE] ? |||||____
[0.2 14:08:35] RNCDOR>BEACON:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S
N 18 14.2900, W 066 45.9700
KP3A Digipeater

KP3A-5 audio level = 29(11/14) ? [NONE] ? |||||____
[0.2 14:08:35] KP3A-5>ID:Network Node (RONCAD)<0x0d>
Unknown APRS Data Type Indicator "N", Yacht ?<= the original primar

Attached to KISS TCP client application 1...

Ready to accept KISS TCP client application 0 on port 8001 ...

NP4JJ-10 audio level = 34(15/15) ? [NONE] ? |||||||__
[0.3 14:08:45] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:49] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

?

Re: Adding port number in BBS log

#43463

On Fri, Mar 14, 2025 at 01:16 PM, John G8BPQ wrote:

Are you asking for this info on outward connects as well?

?

Yes, please.? Trying to diagnose this...

?

Although I have interval times set randomly between 3600-4200 on my HF ports I have 5 hours of no connection attempts from 0600 to 1100 (UTC) and cannot figure out why. All works normal on the AXIP ports.

It is a Windows 10 machine that reboots at 0530 utc and start mail at 0615.

I use 0000-2359 in most of the Times boxes, and Times xxxx-yyyy in the scripts. All scripts have multiple times blocks in them.

?

I am assuming Interval timers start upon start of BPQMail. Do they reset any other time than a connect attempt? Do they reset anytime a forwarding record is changed, or upon incoming connection from that station?? Or any other time?

?

Anything wrong obvious to you?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

Re: Multiple Port APRS Digi different WIDE configuration

#43462

开云体育

APRSPATH defines the path set in outgoing messages, I doesn't affect what is digipeated.

DIGICALLS define which packets you digipeat but this is system-wide. You can't set it by port.

73, John

On 14/03/2025 15:11, Heber Soto, NP4JN via groups.io wrote:

Show quoted text

I am Digipeating APRS traffic in two different frequencies.

?

I was in the impression this would work with this configuration but I am seeing port 4 digipeat beyond WIDE1-1 like port 2:

?

*

APRSDIGI

?APRSCALL=NP4JN-11
?APRSPATH 4=APRS,WIDE1-1
?APRSPATH 2=APRS,WIDE1-1,WIDE2-1

?

?BEACONTOIS=1
?DIGICALLS=WIDE1-1,WIDE2-1
?DIGIMAP 4=IS,4
?DIGIMAP 2=2,IS,4

?

?GATEDPATH 4=WIDE1-1,WIDE2-1;
?GATEDPATH 2=WIDE1-1;

?

?ReplaceDigiCalls ??

?

?MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received with n greater than
?MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.

?

?

I would like to achieve the following Digipeating (GATEDPATH from IS to RF is fine):

?

PORT 2 WIDE1-1,WIDE2-1;

PORT 4 WIDE1-1;

?

Thanks

Heber

Re: Adding port number in BBS log

#43461

开云体育

For incoming connects the port should already be logged. I see this:

?Incoming Connect from GB7BPQ on Port 6 Freq 7050950 Mode ARDOP 500.

Are you asking for this info on outward connects as well?

73, John

On 14/03/2025 12:38, Mark Taylor wrote:

Show quoted text

John, is there a way to add the port number from which a connection is made in the BBS log? If I had the ability to extract by port number it would help diagnose some things.? For example, I would like to see the log for all my Vara connections, i.e. Port 5 and not all the AXIP port connections.? So, just having the port number in there we can extract what we need through grep or whatever.

?

Thanks

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

Re: BBS Error not connecting on all our linbpq nodes with latest 2 versions.

#43460

This is occurring using RF only not telnet.

?

We are calling the node first it will respond but when we issue a command like "?" or "BBS" it would disconnect.

?

We are also call the BBS directly by its Call Sign or Alias same result it would just disconnect.

?

We are trying direct connect C call.

?

The following traffic was originated where I connected to a node via IP telnet then from the node issued C 2 !WP4QNQ-11 to the BBS:

?

[0L 14:07:30] WP4QNQ-11>NP4JN:(UA res, f=1)

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:07:39] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:41] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:07:44] NP4JN>WP4QNQ-11:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)?<0x0d>

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:07:46] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:51] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _||||||__
[0.3 14:07:54] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _|||||___
[0.3 14:07:58] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:08:01] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? ||||||___
[0.2 14:08:05] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

RNCDOR audio level = 28(12/14) ? [NONE] ? |||||____
[0.2 14:08:08] RNCDOR>APN382,WIDE2-1:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:11] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? |||||||__
[0.3 14:08:12] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:16] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:08:20] NP4JN>WP4QNQ-11:(DISC cmd, p=1)

RNCDOR audio level = 29(12/14) ? [NONE] ? |||||____
[0.2 14:08:35] RNCDOR>BEACON:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S
N 18 14.2900, W 066 45.9700
KP3A Digipeater

KP3A-5 audio level = 29(11/14) ? [NONE] ? |||||____
[0.2 14:08:35] KP3A-5>ID:Network Node (RONCAD)<0x0d>
Unknown APRS Data Type Indicator "N", Yacht ?<= the original primar

Attached to KISS TCP client application 1...

Ready to accept KISS TCP client application 0 on port 8001 ...

NP4JJ-10 audio level = 34(15/15) ? [NONE] ? |||||||__
[0.3 14:08:45] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:49] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

?

Re: Vara Minimum Bitrate Suggestion

#43459

Thanks John, I'll keep using the session timer.

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

Re: BBS Error not connecting on all our linbpq nodes with latest 2 versions.

#43458

开云体育

It looks like Direwolf is rejecting an XID, but a SABM is sent afterwards so it should still work. Could you post a bit more of the trace?

Is this a normal level 2 connect or is it between nodes, and which end is BPQ and which is running Direwolf?

LinBPQ now attempts to use ax.25 V2.2 between nodes and so starts the connection sequence with XID but normal user connects shouldn't, unless NC call is used instead of C call.

73,
John

On 14/03/2025 15:53, Heber Soto, NP4JN via groups.io wrote:

Show quoted text

I recently upgraded to the .65 linbpq version and I am receiving reports that they cant connect to our BBS.

?

It would just disconnect if connecting via the node to BBS or directly to BBS via alias or calling.

?

This is occurring in all of our linbpq.

?

This error I am seing in direwolf screen:

?

[0L 11:48:17] WP4QNQ-10>NP4JJ-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

?

NP4JJ-10 audio level = 33(14/15) ? [NONE] ? |||||||__
[0.3 11:48:19] NP4JJ-10>WP4QNQ-10:(XID res, f=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
XID error: Expected Synchronous Tx to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

[0L 11:48:20] WP4QNQ-10>NP4JJ-10:(SABM cmd, p=1)

?

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 11:48:21] NP4JJ-10>WP4QNQ-10:(UA res, f=1)

?

Any suggestions

?

Heber