This is occurring using RF only not telnet.

?

We are calling the node first it will respond but when we issue a command like "?" or "BBS" it would disconnect.

?

We are also call the BBS directly by its Call Sign or Alias same result it would just disconnect.

?

We are trying direct connect C call.

?

The following traffic was originated where I connected to a node via IP telnet then from the node issued C 2 !WP4QNQ-11 to the BBS:

?

[0L 14:07:30] WP4QNQ-11>NP4JN:(UA res, f=1)

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:07:39] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:41] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:07:44] NP4JN>WP4QNQ-11:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)?<0x0d>

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:07:46] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:07:51] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _||||||__
[0.3 14:07:54] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? _|||||___
[0.3 14:07:58] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? |||||||__
[0.3 14:08:01] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(16/15) ? [NONE] ? ||||||___
[0.2 14:08:05] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

RNCDOR audio level = 28(12/14) ? [NONE] ? |||||____
[0.2 14:08:08] RNCDOR>APN382,WIDE2-1:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#

Digipeater NP4JJ-11 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:10] RNCDOR>APN382,NP4JJ-11*:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S, Kantronics KPC-3 rom versions
N 18 14.2900, W 066 45.9700
KP3A Digipeater

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:11] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? |||||||__
[0.3 14:08:12] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? ||||||___
[0.2 14:08:16] NP4JN>WP4QNQ-11:(RR cmd, n(r)=0, p=1)

NP4JN audio level = 33(15/15) ? [NONE] ? _|||||___
[0.3 14:08:20] NP4JN>WP4QNQ-11:(DISC cmd, p=1)

RNCDOR audio level = 29(12/14) ? [NONE] ? |||||____
[0.2 14:08:35] RNCDOR>BEACON:!1814.29NS06645.97W#KP3A Digipeater<0x0d>
Position, OVERLAY DIGI (green star) w/overlay S
N 18 14.2900, W 066 45.9700
KP3A Digipeater

KP3A-5 audio level = 29(11/14) ? [NONE] ? |||||____
[0.2 14:08:35] KP3A-5>ID:Network Node (RONCAD)<0x0d>
Unknown APRS Data Type Indicator "N", Yacht ?<= the original primar

Attached to KISS TCP client application 1...

Ready to accept KISS TCP client application 0 on port 8001 ...

NP4JJ-10 audio level = 34(15/15) ? [NONE] ? |||||||__
[0.3 14:08:45] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

NP4JJ-10 audio level = 33(15/15) ? [NONE] ? _||||||__
[0.3 14:08:49] NP4JJ-10>KP3T-10:(XID cmd, p=1)XID error: Expected Balanced ABM to be set.
XID error: Expected one of Half or Full Duplex be set.
XID error: Expected Extended Address to be set.
?REJ modulo-8 I-Field-Length-Rx=256 Window-Size-Rx=7

?