APRSPATH defines the path set in outgoing messages, I doesn't affect
what is digipeated.
DIGICALLS define which packets you digipeat but this is system-wide.
You can't set it by port.
73, John
On 14/03/2025 15:11, Heber Soto, NP4JN
via groups.io wrote:
toggle quoted message
Show quoted text
I am Digipeating APRS traffic in two different frequencies.
?
I was in the impression this would work with this
configuration but I am seeing port 4 digipeat beyond WIDE1-1
like port 2:
?
*
APRSDIGI
?APRSCALL=NP4JN-11
?APRSPATH 4=APRS,WIDE1-1
?APRSPATH 2=APRS,WIDE1-1,WIDE2-1
?
?BEACONTOIS=1
?DIGICALLS=WIDE1-1,WIDE2-1
?DIGIMAP 4=IS,4
?DIGIMAP 2=2,IS,4
?
?GATEDPATH 4=WIDE1-1,WIDE2-1;
?GATEDPATH 2=WIDE1-1;
?
?ReplaceDigiCalls ??
?
?MaxTraceHops=2 ; Max value of n in CALLN-n processing. If
a packet is received with n greater than
?MaxFloodHops=2 ; this, the value will be replaced BEFORE it
is decremented.
?
?
I would like to achieve the following Digipeating
(GATEDPATH from IS to RF is fine):
?
PORT 2 WIDE1-1,WIDE2-1;
PORT 4 WIDE1-1;
?
Thanks
Heber
