I believe the longer term plan for WhatsPac is to have sort of federared servers, a side effect of which would probably be that separate networks could exist, so there could be a US one in time. That said if you can find a fast route in to the UK that would be interesting too!
It's a new project in alpha but it's very cool, some more information will hopefully soon be added at if anyone wants to follow, there's not much there just yet though.
I don't? use xrouter. The new WhatsPac interface in BPQ removes the
need for it.
WhatsPac is just a BPQ application. You connect to the node that
runs it and type the application, so need to be able to connect to
the MB7NPW node. If you already have axip links to a node in the uk
you may be able to find your way to it.
I probably shouldn't have raised expectations by mentioning it!
73,
John
On 16/02/2025 20:06, Mark Taylor wrote:
John, I can see that if it were an RF connection.? If you
choose I am a BPQ Sysop and want to set up an L4 connection I
thought the instruction would take your information, have you
install a MAP line to your XRouter, and the far end (MM7NPW)
would dynamically install a map line to your XRouter, creating
an AXIP path from MB7NPW to your XRouter, then to your BPQ node
call.
?
Maybe I was just too optimistic.
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
I don't? use xrouter. The new WhatsPac interface in BPQ removes the
need for it.
WhatsPac is just a BPQ application. You connect to the node that
runs it and type the application, so need to be able to connect to
the MB7NPW node. If you already have axip links to a node in the uk
you may be able to find your way to it.
I probably shouldn't have raised expectations by mentioning it!
73,
John
On 16/02/2025 20:06, Mark Taylor wrote:
toggle quoted message
Show quoted text
John, I can see that if it were an RF connection.? If you
choose I am a BPQ Sysop and want to set up an L4 connection I
thought the instruction would take your information, have you
install a MAP line to your XRouter, and the far end (MM7NPW)
would dynamically install a map line to your XRouter, creating
an AXIP path from MB7NPW to your XRouter, then to your BPQ node
call.
?
Maybe I was just too optimistic.
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
John, I can see that if it were an RF connection.? If you choose I am a BPQ Sysop and want to set up an L4 connection I thought the instruction would take your information, have you install a MAP line to your XRouter, and the far end (MM7NPW) would dynamically install a map line to your XRouter, creating an AXIP path from MB7NPW to your XRouter, then to your BPQ node call.
?
Maybe I was just too optimistic.
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
I did get a "
SIGSEGV Receive" crash while I was out dealing with the results of the latest snowfall.
I was not using gdb at the time. When I use gdb it behaves as if setcap was not done, and I lose port 25 for smtp incoming from Claws mail, and I lose protocol 93/AXIP, which results in all of my 44-net links going down.
This looks similar to others I've seen when an incoming VARA connection comes in.
VARA LOG:
2025-02-16 16:54:33 ? ?Incoming connection...
2025-02-16 16:54:36 ? ?Incoming connection...
2025-02-16 16:54:41 ? ?N9SEO-1 connected ?VARA HF v4.8.9
2025-02-16 16:54:42 ? ?8301 TCP Port Closed unexpectedly
2025-02-16 16:54:42 ? ?Incoming Connection failed
2025-02-16 16:54:44 ? ?N9SEO-1 Average S/N: -1.8 dB
2025-02-16 16:54:44 ? ?Disconnected ? ? ?TX: 0 Bytes (Max: 0 bps) ? RX: 0 Bytes (Max: 88 bps) ? Session Time: 00:03
2025-02-16 16:54:54 ? ?WARNING: VARA is not connected to any App via TCP Port 8300
BBS LOG:
250216 16:53:51 |N9PNO ? ? Connecting to BBS N9PNO
250216 16:53:51 <N9PNO ? ? *** CONNECTED
250216 16:53:51 >N9PNO ? ? c 3 n9pno-7
250216 16:53:51 <KF5JRV ? ?*** CONNECTED
250216 16:53:51 >KF5JRV ? ?C 3 KF5JRV-2
250216 16:53:51 <KD9KYL ? ?*** CONNECTED
250216 16:53:51 >KD9KYL ? ?C 3 W9GM-7
250216 16:53:51 <KC0GIS ? ?*** CONNECTED
250216 16:53:51 >KC0GIS ? ?C 3 KC0GIS-7
250216 16:53:52 <KD9KYL ? ?SHAWNO:K5DAT-7} Connected to WILSE:W9GM-7
250216 16:53:52 ?KD9KYL ? ?Script PAUSE 3
250216 16:53:52 <KF5JRV ? ?SHAWNO:K5DAT-7} Connected to HNTSVL:KF5JRV-2
250216 16:53:52 >KF5JRV ? ?BBS
250216 16:53:52 <KC0GIS ? ?SHAWNO:K5DAT-7} Connected to GISNOD:KC0GIS-7
250216 16:53:52 >KC0GIS ? ?BBS
250216 16:53:53 <KD9KYL ? ?Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
250216 16:53:53 <KD9KYL ? ?Type ? (enter) for Commands
250216 16:53:53 <KF5JRV ? ?BPQ32 Packet Switch, Huntsville Arkansas (Huntsville)
250216 16:53:53 <KF5JRV ? ?Enter "I" for information and commands.
250216 16:53:53 <KC0GIS ? ?Welcome to the KC0GIS BPQ32 node. Enjoy!
250216 16:53:53 <KC0GIS ? ?GISNOD:KC0GIS-7 BBS CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
250216 16:53:53 <KF5JRV ? ?HNTSVL:KF5JRV-2} Connected to BBS
250216 16:53:53 <KF5JRV ? ?[BPQ-6.0.23.1-BFWIHJM$]
250216 16:53:53 <KF5JRV ? ?Hello Lee. Latest Message is 4701, Last listed is 0
250216 16:53:53 <KF5JRV ? ?de KF5JRV>
250216 16:53:53 >KF5JRV ? ?[BPQ-6.0.24.62-BFIHJM$]
250216 16:53:53 >KF5JRV ? ?FF
250216 16:53:54 <KC0GIS ? ?GISNOD:KC0GIS-7} Connected to BBS
250216 16:53:54 <KC0GIS ? ?[BPQ-6.0.24.1-B1FWIHJM$]
250216 16:53:54 <KC0GIS ? ?Hello >. Latest Message is 21718, Last listed is 0
250216 16:53:54 <KC0GIS ? ?de KD5LPB>
250216 16:53:54 >KC0GIS ? ?[BPQ-6.0.24.62-B1FIHJM$]
250216 16:53:54 >KC0GIS ? ?FF
250216 16:53:54 <KF5JRV ? ?FA B WY7EMT USA PKTNET 2336_WY7EMT 702
250216 16:53:54 ?KF5JRV ? ?Message Rejected by BID Check
250216 16:53:54 <KF5JRV ? ?FA B KA3VSP USA PKTNET 44879_KA3VSP 1147
250216 16:53:54 ?KF5JRV ? ?Message Rejected by BID Check
250216 16:53:54 <KF5JRV ? ?FA B W1LEM USA PKTNET 7540_KN4LQN 840
250216 16:53:54 ?KF5JRV ? ?Message Rejected by BID Check
250216 16:53:54 <KF5JRV ? ?F> 0C
250216 16:53:54 >KF5JRV ? ?FS ---
250216 16:53:54 >KF5JRV ? ?FF
250216 16:53:55 <KC0GIS ? ?FQ
250216 16:53:55 |KC0GIS ? ?KC0GIS Disconnected
250216 16:53:55 <KD9KYL ? ?Pause Ok
250216 16:53:55 >KD9KYL ? ?C 4 KD9KYL-7
250216 16:53:55 <KF5JRV ? ?FQ
250216 16:53:55 |KF5JRV ? ?KF5JRV Disconnected
250216 16:53:57 <KD9KYL ? ?WILSE:W9GM-7} Connected to KD9KYL-7
250216 16:53:57 >KD9KYL ? ?BBS
250216 16:53:57 <KD9KYL ? ?Welcome to the KD9KYL - Mosinee,WI BPQ32 Node.
250216 16:53:57 <KD9KYL ? ?KD9KYL> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
250216 16:53:59 <KD9KYL ? ?KD9KYL-7} Connected to BBS
250216 16:53:59 <KD9KYL ? ?[BPQ-6.0.24.1-B2FWIHJM$]
250216 16:53:59 <KD9KYL ? ?Hello K5DAT. Latest Message is 12189, Last listed is 0
250216 16:53:59 <KD9KYL ? ?de KD9KYL>
250216 16:53:59 >KD9KYL ? ?[BPQ-6.0.24.62-B1FIHJM$]
250216 16:53:59 >KD9KYL ? ?FF
250216 16:54:01 <KD9KYL ? ?FQ
250216 16:54:01 |KD9KYL ? ?KD9KYL Disconnected
250216 16:54:05 <N9PNO ? ? SHAWNO:K5DAT-7} Failure with N9PNO-7
250216 16:54:05 |N9PNO ? ? N9PNO Disconnected
250216 16:54:06 |N9PNO ? ? Connecting to BBS N9PNO
250216 16:54:06 <N9PNO ? ? *** CONNECTED
250216 16:54:06 ?N9PNO ? ? Script pause 60
250216 17:24:47 ! ? ? ? ? ?Mail Starting
|
Update, it crashed when I checked the BBS box on a user where it was previously unchecked, and then clicked "Update". I wasn't doing that when it went down before, so I think this is possibly a different issue. I have restarted it via gdb. It does seem to be more stable using the pre-compiled binary.
That said, I did see
"SIGSEGV Received" crashes on the .56 binary (i.e. not compiled) after upgrading from .53, which appeared to be the same that N3MEL and WW6Q saw on the .59 code.
[New Thread 0xab5fd420 (LWP 18985)]
[Thread 0xab5fd420 (LWP 18985) exited]
[New Thread 0xab5fd420 (LWP 18996)]
Thread 269 "linbpq" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xab5fd420 (LWP 18996)]
config_setting_lookup (setting=0x0, path=<optimized out>) at libconfig.c:1206
warning: 1206 libconfig.c: No such file or directory
(gdb) q
I'll wait for an auto-crash this time, which is what happened previously.
73, Lee K5DAT
I decided to start over using the .62 pilinbpq binary from the beta downloads area. I have had problems with compiled versions recently ever since upgrading from Ubuntu 22.04 to 24.04, so I wanted to take that out of the equation. It's running now under gdb - will try to watch it closely.
Thanks, Lee K5DAT
|
Yes, it works but you need to be able to connect to node
PEWSEY:MB7NPW. You need to work out your own connect script to get
there.
I suggest you try out the route manually before you enter it in the
WhatsPac setup.
73,
John
On 16/02/2025 14:13, Mark Taylor wrote:
toggle quoted message
Show quoted text
Has anyone been sucessful connecting the client to the server
using your BPQ node?
?
?
As far as I have progressed is Step 1 of 3: Connecting to
G4OTJ's node GB7NBH. The Xrouter indicator is green.? The Server
goes from Red to Pink(?) at the moment I click Connect, then
remains that way for the duration.? I have waited for a couple
of hours with no change.
?
I get an enty in my MHeard list from my node call.
The locked route entry is a different call, but I have tried
my node call in there as well.
The locked route never shows the > indicating a
connection.
Nothing ever shows in the Links page that I could see.
The client (web page:
) is on a machine on the same LAN, and LOCALNET is defined and
works (no passwords ever asked.)
?
The directions were not clear to me if the locked route is
from a unique call assigned to the Xrouter or if it shares the
node call.? Any definitive answer for that would be appreciated.
Nor was there any indication that we should choose a unique
alias.
?
Anyone else have similar results?
Anyone with a sucessful connection that can give any insight?
?
In the meantime, I will hook up a monitor and try it on the
BPQ host machine.
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Has anyone been sucessful connecting the client to the server using your BPQ node?
?
?
As far as I have progressed is Step 1 of 3: Connecting to G4OTJ's node GB7NBH. The Xrouter indicator is green.? The Server goes from Red to Pink(?) at the moment I click Connect, then remains that way for the duration.? I have waited for a couple of hours with no change.
?
I get an enty in my MHeard list from my node call.
The locked route entry is a different call, but I have tried my node call in there as well.
The locked route never shows the > indicating a connection.
Nothing ever shows in the Links page that I could see.
The client (web page: ) is on a machine on the same LAN, and LOCALNET is defined and works (no passwords ever asked.)
?
The directions were not clear to me if the locked route is from a unique call assigned to the Xrouter or if it shares the node call.? Any definitive answer for that would be appreciated.
Nor was there any indication that we should choose a unique alias.
?
Anyone else have similar results?
Anyone with a sucessful connection that can give any insight?
?
In the meantime, I will hook up a monitor and try it on the BPQ host machine.
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
I decided to start over using the .62 pilinbpq binary from the beta downloads area. I have had problems with compiled versions recently ever since upgrading from Ubuntu 22.04 to 24.04, so I wanted to take that out of the equation. It's running now under gdb - will try to watch it closely.
Thanks, Lee K5DAT
On Sun, Feb 16, 2025 at 12:30?AM John G8BPQ via <john.wiseman= [email protected]> wrote:
Do you know what was going on at the time?? Could you check the BBS
log and syslog just before the crash?
Thanks,
John
On 15/02/2025 21:31, Lee Bengston via
wrote:
OK, here is the latest.
~/BPQ$ gdb linbpq
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1)
15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <>
This is free software: you are free to change and
redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<>.
Find the GDB manual and other documentation resources online
at:
? ? <>.
For help, type "help".
Type "apropos word" to search for commands related to
"word"...
Reading symbols from linbpq...
(gdb) handle SIGPIPE nostop noprint pass
Signal ? ? ? ?Stop ? ? ?Print ? Pass to program Description
SIGPIPE ? ? ? No ? ? ? ?No ? ? ?Yes ? ? ? ? ? ? Broken pipe
(gdb) r
Starting program: /home/odroid/BPQ/linbpq
This GDB supports auto-downloading debuginfo from the
following URLs:
? <>
Enable debuginfod for this session? (y or [n]) n
Debuginfod has been disabled.
To make this setting permanent, add 'set debuginfod enabled
off' to .gdbinit.
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
G8BPQ AX25 Packet Switch System Version 6.0.24.62 February
2025
Copyright ? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/odroid/BPQ
Log Directory is /home/odroid/BPQ
Making Directory /home/odroid/BPQ/logs
Configuration file Preprocessor.
Using Configuration file /home/odroid/BPQ/bpq32.cfg
Conversion (probably) successful
PORTS 0x71c194 LINKS 0x723dd8 DESTS 0x727bd8 ROUTES
0x734ec8 L4 0x7368c8 BUFFERS 0x73e6a8
[New Thread 0xb6ab7360 (LWP 5933)]
[New Thread 0xb62b6360 (LWP 5934)]
Initialising Port 01 ? ? TCPKISS IP 127.0.0.1 Port 8004 Chan
A
Initialising Port 02 ? ? ASYNC /dev/ttyUSB0 Chan A
[New Thread 0xb5ab5360 (LWP 5935)]
[New Thread 0xb52b4360 (LWP 5936)]
Initialising Port 03 ? ? AXIP
Initialising Port 04 ? ? AXIP Failed to create RAW socket -
Error 1
[New Thread 0xb46ff360 (LWP 5937)]
warning: could not find '.gnu_debugaltlink' file for
/lib/arm-linux-gnueabihf/libnss_mdns4_minimal.so.2
[New Thread 0xb3efe360 (LWP 5939)]
[New Thread 0xb36fd360 (LWP 5938)]
Telnet Server Bind Failed for SNMP UDP socket 161 - error
code = 13
Initialising Port 05 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan A
[New Thread 0xb2efc360 (LWP 5940)]
[New Thread 0xb26fb360 (LWP 5941)]
Initialising Port 06 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan B
Initialising Port 07 ? ? VARA Host 192.168.200.6 8300
[New Thread 0xb1efa360 (LWP 5942)]
[New Thread 0xb16f9360 (LWP 5943)]
[New Thread 0xb0ef8360 (LWP 5944)]
[New Thread 0xb06f7360 (LWP 5945)]
[New Thread 0xafef6360 (LWP 5946)]
[New Thread 0xaf6f5360 (LWP 5947)]
Initialising Port 10 ? ? AXIP
AXIP Failed to create RAW socket - Error 1
[New Thread 0xaecff360 (LWP 5948)]
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
[Thread 0xaf6f5360 (LWP 5947) exited]
[New Thread 0xaf6f5360 (LWP 5949)]
[New Thread 0xae4fe360 (LWP 5950)]
[Thread 0xb52b4360 (LWP 5936) exited]
[New Thread 0xb52b4360 (LWP 5951)]
APRS Digi/Gateway Enabled
[New Thread 0xadcfd360 (LWP 5952)]
HAMLIB Slave Thread 4532 Running
Rig Control Enabled
[New Thread 0xad4fc360 (LWP 5953)]
MQTT Enabled 0
[New Thread 0xaccfb360 (LWP 5954)]
Starting Chat
Config File is /home/odroid/BPQ/chatconfig.cfg
Chat Started
Starting Mail
Config File is /home/odroid/BPQ/linmail.cfg
Config Processed
[Thread 0xb36fd360 (LWP 5938) exited]
bind(25) failed Error 13: Permission denied
bind(119) failed Error 13: Permission denied
[New Thread 0xb36fd360 (LWP 5955)]
[New Thread 0xac2ff360 (LWP 5956)]
Mail Started
[New Thread 0xabafe360 (LWP 5957)]
[Thread 0xabafe360 (LWP 5957) exited]
[Thread 0xb26fb360 (LWP 5941) exited]
Connected to VARA TNC Port 7
[New Thread 0xb26fb360 (LWP 5958)]
[Thread 0xb26fb360 (LWP 5958) exited]
[New Thread 0xb26fb360 (LWP 5959)]
[Thread 0xb26fb360 (LWP 5959) exited]
[New Thread 0xb26fb360 (LWP 5962)]
[Thread 0xb26fb360 (LWP 5962) exited]
[New Thread 0xab2fd360 (LWP 5969)]
[Thread 0xab2fd360 (LWP 5969) exited]
Connect Failed for AX/TCP port 10093 ?- error code = 110
[New Thread 0xab2fd360 (LWP 5997)]
[Thread 0xab2fd360 (LWP 5997) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 5998)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 5998) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6003)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6003) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6004)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6004) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
*** stack smashing detected ***: terminated ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
Thread 1 "linbpq" received signal SIGABRT, Aborted. ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47 ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
warning: 47 ? ?
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such
file or directory ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
(gdb) ? ? ? ? ?
73,
Lee
On Sat, Feb 15, 2025 at
3:06?PM John G8BPQ via <john.wiseman= [email protected]>
wrote:
I think what is happening is gdb is stopping on the
SIGPIPE, which bpq would normally ignore, so the program
never gets to the point where the segv occurs.? Try typing
handle SIGPIPE nostop noprint pass
before the r command in gdb
73, John
|
Do you know what was going on at the time?? Could you check the BBS
log and syslog just before the crash?
Thanks,
John
On 15/02/2025 21:31, Lee Bengston via
groups.io wrote:
toggle quoted message
Show quoted text
OK, here is the latest.
~/BPQ$ gdb linbpq
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1)
15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <>
This is free software: you are free to change and
redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<>.
Find the GDB manual and other documentation resources online
at:
? ? <>.
For help, type "help".
Type "apropos word" to search for commands related to
"word"...
Reading symbols from linbpq...
(gdb) handle SIGPIPE nostop noprint pass
Signal ? ? ? ?Stop ? ? ?Print ? Pass to program Description
SIGPIPE ? ? ? No ? ? ? ?No ? ? ?Yes ? ? ? ? ? ? Broken pipe
(gdb) r
Starting program: /home/odroid/BPQ/linbpq
This GDB supports auto-downloading debuginfo from the
following URLs:
? <>
Enable debuginfod for this session? (y or [n]) n
Debuginfod has been disabled.
To make this setting permanent, add 'set debuginfod enabled
off' to .gdbinit.
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
G8BPQ AX25 Packet Switch System Version 6.0.24.62 February
2025
Copyright ? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/odroid/BPQ
Log Directory is /home/odroid/BPQ
Making Directory /home/odroid/BPQ/logs
Configuration file Preprocessor.
Using Configuration file /home/odroid/BPQ/bpq32.cfg
Conversion (probably) successful
PORTS 0x71c194 LINKS 0x723dd8 DESTS 0x727bd8 ROUTES
0x734ec8 L4 0x7368c8 BUFFERS 0x73e6a8
[New Thread 0xb6ab7360 (LWP 5933)]
[New Thread 0xb62b6360 (LWP 5934)]
Initialising Port 01 ? ? TCPKISS IP 127.0.0.1 Port 8004 Chan
A
Initialising Port 02 ? ? ASYNC /dev/ttyUSB0 Chan A
[New Thread 0xb5ab5360 (LWP 5935)]
[New Thread 0xb52b4360 (LWP 5936)]
Initialising Port 03 ? ? AXIP
Initialising Port 04 ? ? AXIP Failed to create RAW socket -
Error 1
[New Thread 0xb46ff360 (LWP 5937)]
warning: could not find '.gnu_debugaltlink' file for
/lib/arm-linux-gnueabihf/libnss_mdns4_minimal.so.2
[New Thread 0xb3efe360 (LWP 5939)]
[New Thread 0xb36fd360 (LWP 5938)]
Telnet Server Bind Failed for SNMP UDP socket 161 - error
code = 13
Initialising Port 05 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan A
[New Thread 0xb2efc360 (LWP 5940)]
[New Thread 0xb26fb360 (LWP 5941)]
Initialising Port 06 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan B
Initialising Port 07 ? ? VARA Host 192.168.200.6 8300
[New Thread 0xb1efa360 (LWP 5942)]
[New Thread 0xb16f9360 (LWP 5943)]
[New Thread 0xb0ef8360 (LWP 5944)]
[New Thread 0xb06f7360 (LWP 5945)]
[New Thread 0xafef6360 (LWP 5946)]
[New Thread 0xaf6f5360 (LWP 5947)]
Initialising Port 10 ? ? AXIP
AXIP Failed to create RAW socket - Error 1
[New Thread 0xaecff360 (LWP 5948)]
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
[Thread 0xaf6f5360 (LWP 5947) exited]
[New Thread 0xaf6f5360 (LWP 5949)]
[New Thread 0xae4fe360 (LWP 5950)]
[Thread 0xb52b4360 (LWP 5936) exited]
[New Thread 0xb52b4360 (LWP 5951)]
APRS Digi/Gateway Enabled
[New Thread 0xadcfd360 (LWP 5952)]
HAMLIB Slave Thread 4532 Running
Rig Control Enabled
[New Thread 0xad4fc360 (LWP 5953)]
MQTT Enabled 0
[New Thread 0xaccfb360 (LWP 5954)]
Starting Chat
Config File is /home/odroid/BPQ/chatconfig.cfg
Chat Started
Starting Mail
Config File is /home/odroid/BPQ/linmail.cfg
Config Processed
[Thread 0xb36fd360 (LWP 5938) exited]
bind(25) failed Error 13: Permission denied
bind(119) failed Error 13: Permission denied
[New Thread 0xb36fd360 (LWP 5955)]
[New Thread 0xac2ff360 (LWP 5956)]
Mail Started
[New Thread 0xabafe360 (LWP 5957)]
[Thread 0xabafe360 (LWP 5957) exited]
[Thread 0xb26fb360 (LWP 5941) exited]
Connected to VARA TNC Port 7
[New Thread 0xb26fb360 (LWP 5958)]
[Thread 0xb26fb360 (LWP 5958) exited]
[New Thread 0xb26fb360 (LWP 5959)]
[Thread 0xb26fb360 (LWP 5959) exited]
[New Thread 0xb26fb360 (LWP 5962)]
[Thread 0xb26fb360 (LWP 5962) exited]
[New Thread 0xab2fd360 (LWP 5969)]
[Thread 0xab2fd360 (LWP 5969) exited]
Connect Failed for AX/TCP port 10093 ?- error code = 110
[New Thread 0xab2fd360 (LWP 5997)]
[Thread 0xab2fd360 (LWP 5997) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 5998)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 5998) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6003)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6003) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6004)] ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6004) exited] ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
*** stack smashing detected ***: terminated ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
Thread 1 "linbpq" received signal SIGABRT, Aborted. ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ?
__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47 ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
warning: 47 ? ?
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such
file or directory ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
(gdb) ? ? ? ? ?
73,
Lee
On Sat, Feb 15, 2025 at
3:06?PM John G8BPQ via <john.wiseman= [email protected]>
wrote:
I think what is happening is gdb is stopping on the
SIGPIPE, which bpq would normally ignore, so the program
never gets to the point where the segv occurs.? Try typing
handle SIGPIPE nostop noprint pass
before the r command in gdb
73, John
|
OK, here is the latest.
~/BPQ$ gdb linbpq
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1) 15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<>.
Find the GDB manual and other documentation resources online at:
? ? <>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from linbpq...
(gdb) handle SIGPIPE nostop noprint pass
Signal ? ? ? ?Stop ? ? ?Print ? Pass to program Description
SIGPIPE ? ? ? No ? ? ? ?No ? ? ?Yes ? ? ? ? ? ? Broken pipe
(gdb) r
Starting program: /home/odroid/BPQ/linbpq
This GDB supports auto-downloading debuginfo from the following URLs:
? <>
Enable debuginfod for this session? (y or [n]) n
Debuginfod has been disabled.
To make this setting permanent, add 'set debuginfod enabled off' to .gdbinit.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
G8BPQ AX25 Packet Switch System Version 6.0.24.62 February 2025
Copyright ? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/odroid/BPQ
Log Directory is /home/odroid/BPQ
Making Directory /home/odroid/BPQ/logs
Configuration file Preprocessor.
Using Configuration file /home/odroid/BPQ/bpq32.cfg
Conversion (probably) successful
PORTS 0x71c194 LINKS 0x723dd8 DESTS 0x727bd8 ROUTES 0x734ec8 L4 0x7368c8 BUFFERS 0x73e6a8
[New Thread 0xb6ab7360 (LWP 5933)]
[New Thread 0xb62b6360 (LWP 5934)]
Initialising Port 01 ? ? TCPKISS IP 127.0.0.1 Port 8004 Chan A
Initialising Port 02 ? ? ASYNC /dev/ttyUSB0 Chan A
[New Thread 0xb5ab5360 (LWP 5935)]
[New Thread 0xb52b4360 (LWP 5936)]
Initialising Port 03 ? ? AXIP
Initialising Port 04 ? ? AXIP Failed to create RAW socket - Error 1
[New Thread 0xb46ff360 (LWP 5937)]
warning: could not find '.gnu_debugaltlink' file for /lib/arm-linux-gnueabihf/libnss_mdns4_minimal.so.2
[New Thread 0xb3efe360 (LWP 5939)]
[New Thread 0xb36fd360 (LWP 5938)]
Telnet Server Bind Failed for SNMP UDP socket 161 - error code = 13
Initialising Port 05 ? ? UZ7HO Host 192.168.200.6 Port 9000 Chan A
[New Thread 0xb2efc360 (LWP 5940)]
[New Thread 0xb26fb360 (LWP 5941)]
Initialising Port 06 ? ? UZ7HO Host 192.168.200.6 Port 9000 Chan B
Initialising Port 07 ? ? VARA Host 192.168.200.6 8300
[New Thread 0xb1efa360 (LWP 5942)]
[New Thread 0xb16f9360 (LWP 5943)]
[New Thread 0xb0ef8360 (LWP 5944)]
[New Thread 0xb06f7360 (LWP 5945)]
[New Thread 0xafef6360 (LWP 5946)]
[New Thread 0xaf6f5360 (LWP 5947)]
Initialising Port 10 ? ? AXIP
AXIP Failed to create RAW socket - Error 1
[New Thread 0xaecff360 (LWP 5948)]
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
[Thread 0xaf6f5360 (LWP 5947) exited]
[New Thread 0xaf6f5360 (LWP 5949)]
[New Thread 0xae4fe360 (LWP 5950)]
[Thread 0xb52b4360 (LWP 5936) exited]
[New Thread 0xb52b4360 (LWP 5951)]
APRS Digi/Gateway Enabled
[New Thread 0xadcfd360 (LWP 5952)]
HAMLIB Slave Thread 4532 Running
Rig Control Enabled
[New Thread 0xad4fc360 (LWP 5953)]
MQTT Enabled 0
[New Thread 0xaccfb360 (LWP 5954)]
Starting Chat
Config File is /home/odroid/BPQ/chatconfig.cfg
Chat Started
Starting Mail
Config File is /home/odroid/BPQ/linmail.cfg
Config Processed
[Thread 0xb36fd360 (LWP 5938) exited]
bind(25) failed Error 13: Permission denied
bind(119) failed Error 13: Permission denied
[New Thread 0xb36fd360 (LWP 5955)]
[New Thread 0xac2ff360 (LWP 5956)]
Mail Started
[New Thread 0xabafe360 (LWP 5957)]
[Thread 0xabafe360 (LWP 5957) exited]
[Thread 0xb26fb360 (LWP 5941) exited]
Connected to VARA TNC Port 7
[New Thread 0xb26fb360 (LWP 5958)]
[Thread 0xb26fb360 (LWP 5958) exited]
[New Thread 0xb26fb360 (LWP 5959)]
[Thread 0xb26fb360 (LWP 5959) exited]
[New Thread 0xb26fb360 (LWP 5962)]
[Thread 0xb26fb360 (LWP 5962) exited]
[New Thread 0xab2fd360 (LWP 5969)]
[Thread 0xab2fd360 (LWP 5969) exited]
Connect Failed for AX/TCP port 10093 ?- error code = 110
[New Thread 0xab2fd360 (LWP 5997)]
[Thread 0xab2fd360 (LWP 5997) exited] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 5998)] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 5998) exited] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6003)] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6003) exited] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[New Thread 0xab2fd360 (LWP 6004)] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
[Thread 0xab2fd360 (LWP 6004) exited] ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
*** stack smashing detected ***: terminated ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
Thread 1 "linbpq" received signal SIGABRT, Aborted. ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
__libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
warning: 47 ? ? ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such file or directory ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
(gdb) ? ? ? ? ?
73, Lee
On Sat, Feb 15, 2025 at 3:06?PM John G8BPQ via <john.wiseman= [email protected]> wrote:
I think what is happening is gdb is stopping on the SIGPIPE, which
bpq would normally ignore, so the program never gets to the point
where the segv occurs.? Try typing
handle SIGPIPE nostop noprint pass
before the r command in gdb
73, John _._,_._,_
|
I think what is happening is gdb is stopping on the SIGPIPE, which
bpq would normally ignore, so the program never gets to the point
where the segv occurs.? Try typing
handle SIGPIPE nostop noprint pass
before the r command in gdb
73, John
On 15/02/2025 20:31, Lee Bengston via
groups.io wrote:
toggle quoted message
Show quoted text
Here it is with no GDB.
./linbpq
G8BPQ AX25 Packet Switch System Version 6.0.24.62 February
2025
Copyright ? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/odroid/BPQ
Log Directory is /home/odroid/BPQ
Making Directory /home/odroid/BPQ/logs
Configuration file Preprocessor.
Using Configuration file /home/odroid/BPQ/bpq32.cfg
Conversion (probably) successful
PORTS 0x688194 LINKS 0x68fdd8 DESTS 0x693bd8 ROUTES 0x6a0ec8
L4 0x6a28c8 BUFFERS 0x6aa6a8
Initialising Port 01 ? ? TCPKISS IP 127.0.0.1 Port 8004 Chan A
Initialising Port 02 ? ? ASYNC /dev/ttyUSB0 Chan A
Initialising Port 03 ? ? AXIP
Initialising Port 04 ? ? Telnet Server
Initialising Port 05 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan A
Initialising Port 06 ? ? UZ7HO Host 192.168.200.6 Port 9000
Chan B
Initialising Port 07 ? ? VARA Host 192.168.200.6 8300
Initialising Port 10 ? ? AXIP
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
APRS Digi/Gateway Enabled
HAMLIB Slave Thread 4532 Running
Rig Control Enabled
MQTT Enabled 0
Starting Chat
Config File is /home/odroid/BPQ/chatconfig.cfg
Chat Started
Starting Mail
Config File is /home/odroid/BPQ/linmail.cfg
Config Processed
Mail Started
Connected to VARA TNC Port 7
Connect Failed for AX/TCP port 10093 ?- error code = 110
SIGSEGV Received
73,
Lee K5DAT
On Sat, Feb 15, 2025 at
12:24?PM John G8BPQ via <john.wiseman= [email protected]>
wrote:
It's odd, because I should be trapping and
ignoring?SIGPIPE. Do you get the same error message when
not running under gdb?
Thanks,
John
On 15/02/2025 17:46, Lee Bengston via wrote:
Fyi, this is when running the .62 code, but I
believe it's the same issue I've been seeing since
trying to upgrade from .53 to .56.? The .62 binary
was built from source
Thread 1 "linbpq" received signal
SIGPIPE, Broken pipe.
Download failed: Invalid argument.? Continuing
without source file
./csu/../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S.
__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
warning: 47 ? ?
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No
such file or directory
(gdb) bt
#0 ?__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
#1 ?0xb6e97158 in __libc_send (flags=0, len=1,
buf=0x9ef956, fd=36) at
../sysdeps/unix/sysv/linux/send.c:26
#2 ?__libc_send (fd=36, buf=0x9ef956, len=1,
flags=0) at ../sysdeps/unix/sysv/linux/send.c:23
#3 ?0x005df3a2 in InnerProcessData (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190, len=4)
at TelnetV6.c:3777
#4 ?0x005dec08 in DataSocket_Read (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190) at
TelnetV6.c:3603
#5 ?0x005db9ee in TelnetPoll (Port=4) at
TelnetV6.c:2216
#6 ?0x005d8d8c in ExtProc (fn=1, port=4,
buff=0x75c3d8 <DATAAREA+578116>) at
TelnetV6.c:1029
#7 ?0x005592e8 in EXTRX (PORTVEC=0x6d2030
<DATAAREA+11932>) at cMain.c:430
#8 ?0x0055cfb2 in TIMERINTERRUPT () at
cMain.c:2431
#9 ?0x005a8806 in main (argc=1, argv=0xbea1cd54)
at LinBPQ.c:1576
(gdb)
Fyi, the 3 of us that have seen this issue are
all running LinBPQ and communicating to VARA running
on a Windows computer. I thought it was related to
incoming vara connections, but the last time it
happened I could not correlate it to VARA.
I'll try the binary version from the beta
downloads in case the behavior is different.
73,
Lee K5DAT
On Sat, Feb 15,
2025 at 8:00?AM John G8BPQ via
<john.wiseman= [email protected]>
wrote:
I've
uploaded a new verion of BPQ32/LinBPQ (.62) to my
beta site and
github.
Main changes are fixing a bug in resequencing
NETROM packet and adding
compression of NETROM frames and an interface for
the WhatsPac client.
73, John
|
Here it is with no GDB.
./linbpq
G8BPQ AX25 Packet Switch System Version 6.0.24.62 February 2025
Copyright ? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/odroid/BPQ
Log Directory is /home/odroid/BPQ
Making Directory /home/odroid/BPQ/logs
Configuration file Preprocessor.
Using Configuration file /home/odroid/BPQ/bpq32.cfg
Conversion (probably) successful
PORTS 0x688194 LINKS 0x68fdd8 DESTS 0x693bd8 ROUTES 0x6a0ec8 L4 0x6a28c8 BUFFERS 0x6aa6a8
Initialising Port 01 ? ? TCPKISS IP 127.0.0.1 Port 8004 Chan A
Initialising Port 02 ? ? ASYNC /dev/ttyUSB0 Chan A
Initialising Port 03 ? ? AXIP
Initialising Port 04 ? ? Telnet Server
Initialising Port 05 ? ? UZ7HO Host 192.168.200.6 Port 9000 Chan A
Initialising Port 06 ? ? UZ7HO Host 192.168.200.6 Port 9000 Chan B
Initialising Port 07 ? ? VARA Host 192.168.200.6 8300
Initialising Port 10 ? ? AXIP
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
APRS Digi/Gateway Enabled
HAMLIB Slave Thread 4532 Running
Rig Control Enabled
MQTT Enabled 0
Starting Chat
Config File is /home/odroid/BPQ/chatconfig.cfg
Chat Started
Starting Mail
Config File is /home/odroid/BPQ/linmail.cfg
Config Processed
Mail Started
Connected to VARA TNC Port 7
Connect Failed for AX/TCP port 10093 ?- error code = 110
SIGSEGV Received
73, Lee K5DAT
On Sat, Feb 15, 2025 at 12:24?PM John G8BPQ via <john.wiseman= [email protected]> wrote:
It's odd, because I should be trapping and ignoring?SIGPIPE. Do you
get the same error message when not running under gdb?
Thanks,
John
On 15/02/2025 17:46, Lee Bengston via
wrote:
Fyi, this is when running the .62 code, but I believe it's
the same issue I've been seeing since trying to upgrade from
.53 to .56.? The .62 binary was built from source
Thread 1 "linbpq" received signal SIGPIPE, Broken
pipe.
Download failed: Invalid argument.? Continuing without source
file ./csu/../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S.
__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
warning: 47 ? ?
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such file
or directory
(gdb) bt
#0 ?__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
#1 ?0xb6e97158 in __libc_send (flags=0, len=1, buf=0x9ef956,
fd=36) at ../sysdeps/unix/sysv/linux/send.c:26
#2 ?__libc_send (fd=36, buf=0x9ef956, len=1, flags=0) at
../sysdeps/unix/sysv/linux/send.c:23
#3 ?0x005df3a2 in InnerProcessData (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190, len=4) at
TelnetV6.c:3777
#4 ?0x005dec08 in DataSocket_Read (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190) at
TelnetV6.c:3603
#5 ?0x005db9ee in TelnetPoll (Port=4) at TelnetV6.c:2216
#6 ?0x005d8d8c in ExtProc (fn=1, port=4, buff=0x75c3d8
<DATAAREA+578116>) at TelnetV6.c:1029
#7 ?0x005592e8 in EXTRX (PORTVEC=0x6d2030
<DATAAREA+11932>) at cMain.c:430
#8 ?0x0055cfb2 in TIMERINTERRUPT () at cMain.c:2431
#9 ?0x005a8806 in main (argc=1, argv=0xbea1cd54) at
LinBPQ.c:1576
(gdb)
Fyi, the 3 of us that have seen this issue are all running
LinBPQ and communicating to VARA running on a Windows
computer. I thought it was related to incoming vara
connections, but the last time it happened I could not
correlate it to VARA.
I'll try the binary version from the beta downloads in case
the behavior is different.
73,
Lee K5DAT
On Sat, Feb 15, 2025 at
8:00?AM John G8BPQ via <john.wiseman= [email protected]>
wrote:
I've
uploaded a new verion of BPQ32/LinBPQ (.62) to my beta site
and
github.
Main changes are fixing a bug in resequencing NETROM packet
and adding
compression of NETROM frames and an interface for the
WhatsPac client.
73, John
|
It's odd, because I should be trapping and ignoring?SIGPIPE. Do you
get the same error message when not running under gdb?
Thanks,
John
On 15/02/2025 17:46, Lee Bengston via
groups.io wrote:
toggle quoted message
Show quoted text
Fyi, this is when running the .62 code, but I believe it's
the same issue I've been seeing since trying to upgrade from
.53 to .56.? The .62 binary was built from source
Thread 1 "linbpq" received signal SIGPIPE, Broken
pipe.
Download failed: Invalid argument.? Continuing without source
file ./csu/../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S.
__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
warning: 47 ? ?
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such file
or directory
(gdb) bt
#0 ?__libc_do_syscall () at
../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
#1 ?0xb6e97158 in __libc_send (flags=0, len=1, buf=0x9ef956,
fd=36) at ../sysdeps/unix/sysv/linux/send.c:26
#2 ?__libc_send (fd=36, buf=0x9ef956, len=1, flags=0) at
../sysdeps/unix/sysv/linux/send.c:23
#3 ?0x005df3a2 in InnerProcessData (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190, len=4) at
TelnetV6.c:3777
#4 ?0x005dec08 in DataSocket_Read (TNC=0x9b05e0,
sockptr=0x9ef918, sock=36, STREAM=0x9b1190) at
TelnetV6.c:3603
#5 ?0x005db9ee in TelnetPoll (Port=4) at TelnetV6.c:2216
#6 ?0x005d8d8c in ExtProc (fn=1, port=4, buff=0x75c3d8
<DATAAREA+578116>) at TelnetV6.c:1029
#7 ?0x005592e8 in EXTRX (PORTVEC=0x6d2030
<DATAAREA+11932>) at cMain.c:430
#8 ?0x0055cfb2 in TIMERINTERRUPT () at cMain.c:2431
#9 ?0x005a8806 in main (argc=1, argv=0xbea1cd54) at
LinBPQ.c:1576
(gdb)
Fyi, the 3 of us that have seen this issue are all running
LinBPQ and communicating to VARA running on a Windows
computer. I thought it was related to incoming vara
connections, but the last time it happened I could not
correlate it to VARA.
I'll try the binary version from the beta downloads in case
the behavior is different.
73,
Lee K5DAT
On Sat, Feb 15, 2025 at
8:00?AM John G8BPQ via <john.wiseman= [email protected]>
wrote:
I've
uploaded a new verion of BPQ32/LinBPQ (.62) to my beta site
and
github.
Main changes are fixing a bug in resequencing NETROM packet
and adding
compression of NETROM frames and an interface for the
WhatsPac client.
73, John
|
Fyi, this is when running the .62 code, but I believe it's the same issue I've been seeing since trying to upgrade from .53 to .56.? The .62 binary was built from source
Thread 1 "linbpq" received signal SIGPIPE, Broken pipe.
Download failed: Invalid argument.? Continuing without source file ./csu/../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S.
__libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
warning: 47 ? ? ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such file or directory
(gdb) bt
#0 ?__libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
#1 ?0xb6e97158 in __libc_send (flags=0, len=1, buf=0x9ef956, fd=36) at ../sysdeps/unix/sysv/linux/send.c:26
#2 ?__libc_send (fd=36, buf=0x9ef956, len=1, flags=0) at ../sysdeps/unix/sysv/linux/send.c:23
#3 ?0x005df3a2 in InnerProcessData (TNC=0x9b05e0, sockptr=0x9ef918, sock=36, STREAM=0x9b1190, len=4) at TelnetV6.c:3777
#4 ?0x005dec08 in DataSocket_Read (TNC=0x9b05e0, sockptr=0x9ef918, sock=36, STREAM=0x9b1190) at TelnetV6.c:3603
#5 ?0x005db9ee in TelnetPoll (Port=4) at TelnetV6.c:2216
#6 ?0x005d8d8c in ExtProc (fn=1, port=4, buff=0x75c3d8 <DATAAREA+578116>) at TelnetV6.c:1029
#7 ?0x005592e8 in EXTRX (PORTVEC=0x6d2030 <DATAAREA+11932>) at cMain.c:430
#8 ?0x0055cfb2 in TIMERINTERRUPT () at cMain.c:2431
#9 ?0x005a8806 in main (argc=1, argv=0xbea1cd54) at LinBPQ.c:1576
(gdb)
Fyi, the 3 of us that have seen this issue are all running LinBPQ and communicating to VARA running on a Windows computer. I thought it was related to incoming vara connections, but the last time it happened I could not correlate it to VARA.
I'll try the binary version from the beta downloads in case the behavior is different.
73, Lee K5DAT
On Sat, Feb 15, 2025 at 8:00?AM John G8BPQ via <john.wiseman= [email protected]> wrote: I've uploaded a new verion of BPQ32/LinBPQ (.62) to my beta site and
github.
Main changes are fixing a bug in resequencing NETROM packet and adding
compression of NETROM frames and an interface for the WhatsPac client.
73, John
|
Sorry, just checked and pilinbpq was built needing libasound.
I've uploaded a replacement to beta.
73,
John
On 15/02/2025 16:09, jeff arthur via
groups.io wrote:
toggle quoted message
Show quoted text
Any new reps for this beta John?
?
I am getting errors looking for libasound.so.2.
?
M0THH.
|
It shouldn't need libasound.
Which architecture? are you running?
73,
John
On 15/02/2025 16:09, jeff arthur via
groups.io wrote:
toggle quoted message
Show quoted text
Any new reps for this beta John?
?
I am getting errors looking for libasound.so.2.
?
M0THH.
|
Any new reps for this beta John?
?
I am getting errors looking for libasound.so.2.
?
M0THH.
|
https://ukpacketradio.network/nodes:gb7bsk
?
http://whatspac.m0ahn.co.uk:88/
|
It is basically a packet version of WhatsApp. At the still being
developed and at the moment only runs on one node in the UK.
There isn't a lot of information about yet
WhatsPac
WhatsPac is a
great new application for packet that has chat channels and
private messages. Visit??for
more information. Note that the project is in alpha so a few
things are still being ironed out.
It is possible to
route to the main WhatsPac server node??from
GB7BSK, although the most stable route includes one AXIP link,
the rest is all RF. Have a look a the??to get an idea of routes and
feel free to drop 2E0HKD a message by packet mail or on the OARC
discord if you need help with routing.
On 15/02/2025 14:06, Pascal Lafond
VA2HOM via groups.io wrote:
toggle quoted message
Show quoted text
What is
WhatsPac where can i get information about this?? I try to google
it but i found nothing.
73 de Pascal
va2hom
Le 2025-02-15 à 09 h 00, John G8BPQ via groups.io a écrit?:
I've uploaded a new verion of BPQ32/LinBPQ
(.62) to my beta site and github.
Main changes are fixing a bug in resequencing NETROM packet and
adding compression of NETROM frames and an interface for the
WhatsPac client.
73, John
|
What is WhatsPac where can i get information about this?? I try to google it but i found nothing.
73 de Pascal
va2hom
toggle quoted message
Show quoted text
Le 2025-02-15 à 09 h 00, John G8BPQ via groups.io a écrit?: I've uploaded a new verion of BPQ32/LinBPQ (.62) to my beta site and github.
Main changes are fixing a bug in resequencing NETROM packet and adding compression of NETROM frames and an interface for the WhatsPac client.
73, John
|
