¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: linbpq build error

 

¿ªÔÆÌåÓý

Are you building a 32 bit or 64 bit version of linbpq? Do you have the right libraries for that architecture?

73,
John


On 22/10/2024 12:08, Hari Hendaryanto wrote:

hi John,

still no joy even i have those both static libraries now
harry@aml linbpq (master) $ ls /usr/lib/arm-linux-gnueabihf/libjansson*
/usr/lib/arm-linux-gnueabihf/libjansson.a ? /usr/lib/arm-linux-gnueabihf/libjansson.so.4
/usr/lib/arm-linux-gnueabihf/libjansson.so ?/usr/lib/arm-linux-gnueabihf/libjansson.so.4.11.1

harry@aml linbpq (master) $ ls /usr/lib/arm-linux-gnueabihf/libpaho-mqtt3*
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3a.a ? /usr/lib/arm-linux-gnueabihf/libpaho-mqtt3as.so ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3cs.a
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3a.so ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3c.a ? ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3cs.so
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3as.a ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3c.so

/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1

i've end up compiling linbpq without mqtt support.

harry@aml linbpq (master) $ ./linbpq -h
G8BPQ AX25 Packet Switch System Version 6.0.24.47 October 2024
Copyright 01-2024 John Wiseman G8BPQ

thanks a bunch anyway
73 hari YD0BCX

On Tue, Oct 22, 2024 at 1:47?PM John G8BPQ via <john.wiseman=[email protected]> wrote:
Sorry, I forget to document this. BPQ now supports sending information to an mqtt broker. This adds dependencies on libjansson-dev and? libpaho-mqtt-dev. If you can't find a package for libpaho-mqtt3a.a? you can build without mqtt support:

make nomqtt. You may need a make clean first.

or install from source. This works for me:

git clone
cd paho.mqtt.c
cmake -Bbuild -H. -DPAHO_ENABLE_TESTING=OFF -DPAHO_BUILD_STATIC=ON -DPAHO_WITH_SSL=OFF -DPAHO_HIGH_PERFORMANCE=ON -DCMAKE_INSTALL_PREFIX=../install
cd build
cmake --build . --target install

Then copy to your lib directory. I use

sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/arm-linux-gnueabihf
or
sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/or i386-linux-gnu/

73, John



On 22/10/2024 05:24, Hari Hendaryanto wrote:
hi guys,
?
i was trying to build linbpq latest from source obaint from jon's repository(git://vps1.g8bpq.net/linbpq)
my system is kinda ancient using debian buster on armlogic s905.
?
previously i've never had any problem compiling the source until version 6.0.24.42 August 2024.
now i have :(
?
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o ?UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o -Xlinker -Map=output.map -l:libminiupnpc.a -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
?
i can manually installed libjansson.a static package from deb package for armhf. then do ldconfig.
however i cannot find any libpaho-mqtt3a.a for my debian buster anywhere.
?
any help would be appreciated.
?
Thanks in advance
Hari YD0BCX
Re: linbpq build error

 

hi John,

still no joy even i have those both static libraries now
harry@aml linbpq (master) $ ls /usr/lib/arm-linux-gnueabihf/libjansson*
/usr/lib/arm-linux-gnueabihf/libjansson.a ? /usr/lib/arm-linux-gnueabihf/libjansson.so.4
/usr/lib/arm-linux-gnueabihf/libjansson.so ?/usr/lib/arm-linux-gnueabihf/libjansson.so.4.11.1

harry@aml linbpq (master) $ ls /usr/lib/arm-linux-gnueabihf/libpaho-mqtt3*
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3a.a ? /usr/lib/arm-linux-gnueabihf/libpaho-mqtt3as.so ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3cs.a
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3a.so ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3c.a ? ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3cs.so
/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3as.a ?/usr/lib/arm-linux-gnueabihf/libpaho-mqtt3c.so

/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1

i've end up compiling linbpq without mqtt support.

harry@aml linbpq (master) $ ./linbpq -h
G8BPQ AX25 Packet Switch System Version 6.0.24.47 October 2024
Copyright 01-2024 John Wiseman G8BPQ

thanks a bunch anyway
73 hari YD0BCX

On Tue, Oct 22, 2024 at 1:47?PM John G8BPQ via <john.wiseman=[email protected]> wrote:
Sorry, I forget to document this. BPQ now supports sending information to an mqtt broker. This adds dependencies on libjansson-dev and? libpaho-mqtt-dev. If you can't find a package for libpaho-mqtt3a.a? you can build without mqtt support:

make nomqtt. You may need a make clean first.

or install from source. This works for me:

git clone
cd paho.mqtt.c
cmake -Bbuild -H. -DPAHO_ENABLE_TESTING=OFF -DPAHO_BUILD_STATIC=ON -DPAHO_WITH_SSL=OFF -DPAHO_HIGH_PERFORMANCE=ON -DCMAKE_INSTALL_PREFIX=../install
cd build
cmake --build . --target install

Then copy to your lib directory. I use

sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/arm-linux-gnueabihf
or
sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/or i386-linux-gnu/

73, John



On 22/10/2024 05:24, Hari Hendaryanto wrote:
hi guys,
?
i was trying to build linbpq latest from source obaint from jon's repository(git://vps1.g8bpq.net/linbpq)
my system is kinda ancient using debian buster on armlogic s905.
?
previously i've never had any problem compiling the source until version 6.0.24.42 August 2024.
now i have :(
?
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o ?UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o -Xlinker -Map=output.map -l:libminiupnpc.a -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
?
i can manually installed libjansson.a static package from deb package for armhf. then do ldconfig.
however i cannot find any libpaho-mqtt3a.a for my debian buster anywhere.
?
any help would be appreciated.
?
Thanks in advance
Hari YD0BCX
Re: linbpq build error

 

Thanks for your complete responses john. I will definitely will try those info you gave us.

73 hari YD0BCX

On Tue, 22 Oct 2024, 1:47?pm John G8BPQ via , <john.wiseman=[email protected]> wrote:
Sorry, I forget to document this. BPQ now supports sending information to an mqtt broker. This adds dependencies on libjansson-dev and? libpaho-mqtt-dev. If you can't find a package for libpaho-mqtt3a.a? you can build without mqtt support:

make nomqtt. You may need a make clean first.

or install from source. This works for me:

git clone
cd paho.mqtt.c
cmake -Bbuild -H. -DPAHO_ENABLE_TESTING=OFF -DPAHO_BUILD_STATIC=ON -DPAHO_WITH_SSL=OFF -DPAHO_HIGH_PERFORMANCE=ON -DCMAKE_INSTALL_PREFIX=../install
cd build
cmake --build . --target install

Then copy to your lib directory. I use

sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/arm-linux-gnueabihf
or
sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/or i386-linux-gnu/

73, John



On 22/10/2024 05:24, Hari Hendaryanto wrote:
hi guys,
?
i was trying to build linbpq latest from source obaint from jon's repository(git://vps1.g8bpq.net/linbpq)
my system is kinda ancient using debian buster on armlogic s905.
?
previously i've never had any problem compiling the source until version 6.0.24.42 August 2024.
now i have :(
?
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o ?UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o -Xlinker -Map=output.map -l:libminiupnpc.a -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
?
i can manually installed libjansson.a static package from deb package for armhf. then do ldconfig.
however i cannot find any libpaho-mqtt3a.a for my debian buster anywhere.
?
any help would be appreciated.
?
Thanks in advance
Hari YD0BCX
Re: linbpq build error

 

¿ªÔÆÌåÓý

Sorry, I forget to document this. BPQ now supports sending information to an mqtt broker. This adds dependencies on libjansson-dev and? libpaho-mqtt-dev. If you can't find a package for libpaho-mqtt3a.a? you can build without mqtt support:

make nomqtt. You may need a make clean first.

or install from source. This works for me:

git clone
cd paho.mqtt.c
cmake -Bbuild -H. -DPAHO_ENABLE_TESTING=OFF -DPAHO_BUILD_STATIC=ON -DPAHO_WITH_SSL=OFF -DPAHO_HIGH_PERFORMANCE=ON -DCMAKE_INSTALL_PREFIX=../install
cd build
cmake --build . --target install

Then copy to your lib directory. I use

sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/arm-linux-gnueabihf
or
sudo cp ./install/lib/libpaho-mqtt3a.a /usr/lib/or i386-linux-gnu/

73, John



On 22/10/2024 05:24, Hari Hendaryanto wrote:

hi guys,
?
i was trying to build linbpq latest from source obaint from jon's repository(git://vps1.g8bpq.net/linbpq)
my system is kinda ancient using debian buster on armlogic s905.
?
previously i've never had any problem compiling the source until version 6.0.24.42 August 2024.
now i have :(
?
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o ?UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o -Xlinker -Map=output.map -l:libminiupnpc.a -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
?
i can manually installed libjansson.a static package from deb package for armhf. then do ldconfig.
however i cannot find any libpaho-mqtt3a.a for my debian buster anywhere.
?
any help would be appreciated.
?
Thanks in advance
Hari YD0BCX
linbpq build error

 

hi guys,
?
i was trying to build linbpq latest from source obaint from jon's repository(git://vps1.g8bpq.net/linbpq)
my system is kinda ancient using debian buster on armlogic s905.
?
previously i've never had any problem compiling the source until version 6.0.24.42 August 2024.
now i have :(
?
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o ?UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o -Xlinker -Map=output.map -l:libminiupnpc.a -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
?
i can manually installed libjansson.a static package from deb package for armhf. then do ldconfig.
however i cannot find any libpaho-mqtt3a.a for my debian buster anywhere.
?
any help would be appreciated.
?
Thanks in advance
Hari YD0BCX
Re: Fwd partners via QO-100

 

¿ªÔÆÌåÓý

I'm running QtSM with 300 baud afsk and 1200 baud bpsk both il2p and 1500 Hz centre on 10489630. TX is only on when I'm in the shack but rx most of the time, so I can check in MH to see if I'm hearing anyone.

Node GB7BPQ-2, BBS GB7BPQ.

73, John

On 20/10/2024 20:20, Dr. Sergey Ievkov wrote:

Hello, OMs!

I am temporarily left without a HF antenna (they walled up access to the roof), but I have assembled a simple kit for working via QO-100 and am looking for partners for sending mail and bulletins.

I can work in VARA SAT (preferably), but it is possible to use any mods from QtSM (I understand, IL2P BPSK)

Red PE1RRR (SK) shared information on his website (), I hear G7TAJ (he did not tell me, he wrote a letter). But who else is ready to continue creating a packet network on QO-100?
Any ideas and comments, I am open to experiments.

Sergey, RN1M

email: rn1m@...
pr-mail: RN1M@...
Re: VARA Error & Port stays attached

 

Wow!
? That post is like reading a good book.
?Thanks for posting Lee.

Hello
George Kirn had contact with this data.


On Sun, Oct 20, 2024 at 4:46?PM Lee Bengston via <kilo5dat=[email protected]> wrote:
I found the radio sitting on one frequency, so I checked the status and saw what is shown below.

image.png

As it polls, the channel state can change from clear to busy, then change back.

image.png

Now I'm not sure that CLEANTXBUFFER BUFFEREMPTY is related to the root cause.

241020 15:02:43 |N3MEL ? ? Connecting to BBS N3MEL
241020 15:02:44 <N3MEL ? ? *** CONNECTED
241020 15:02:44 ?N3MEL ? ? Script MSGTYPES PTBR
241020 15:02:44 >N3MEL ? ? ATT 7
241020 15:02:44 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241020 15:02:44 >N3MEL ? ? BW500
241020 15:02:44 <N3MEL ? ? VARA} OK
241020 15:02:44 >N3MEL ? ? RADIO 14.1065 USB
241020 15:02:44 <N3MEL ? ? Mode and Frequency Set OK
241020 15:02:44 >N3MEL ? ? C N3MEL-2
241020 15:02:45 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241020 15:02:55 <N3MEL ? ? Sorry, Can't Connect - Channel is busy
241020 15:02:55 |N3MEL ? ? N3MEL Disconnected
241020 15:02:56 |N3MEL ? ? Connecting to BBS N3MEL
241020 15:02:56 <N3MEL ? ? *** CONNECTED
241020 15:02:56 >N3MEL ? ? D
241020 15:02:56 <N3MEL ? ? SHAWNO:K5DAT-7} Invalid command - Enter ? for command list
241020 15:02:56 |N3MEL ? ? N3MEL Disconnected
241020 15:03:49 |DTXBBS ? ?Connecting to BBS DTXBBS
241020 15:03:49 <DTXBBS ? ?*** CONNECTED
241020 15:03:49 >DTXBBS ? ?c 2 w1dtx-7
241020 15:04:03 <DTXBBS ? ?SHAWNO:K5DAT-7} Failure with W1DTX-7
241020 15:04:03 |DTXBBS ? ?DTXBBS Disconnected
241020 15:05:05 |KK4DIV ? ?Connecting to BBS KK4DIV
241020 15:05:05 <KK4DIV ? ?*** CONNECTED
241020 15:05:05 >KK4DIV ? ?C KK4DIV-7
241020 15:05:06 <KK4DIV ? ?SHAWNO:K5DAT-7} Connected to LHNOD:KK4DIV-7
241020 15:05:06 >KK4DIV ? ?BBS
241020 15:05:07 <KK4DIV ? ?KK4DIV Packet Node in Lynn Haven, FL
241020 15:05:07 <KK4DIV ? ?LHNOD:KK4DIV-7} BBS RMS CHAT SYSOP CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD
241020 15:05:07 <KK4DIV ? ?LHNOD:KK4DIV-7} Connected to BBS
241020 15:05:08 <KK4DIV ? ?[BPQ-6.0.24.1-B2FWIHJM$]
241020 15:05:08 <KK4DIV ? ?Hello Lee. Latest Message is 23356, Last listed is 0
241020 15:05:08 <KK4DIV ? ?de KK4DIV>
241020 15:05:08 >KK4DIV ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:05:08 >KK4DIV ? ?FA B KE2I USA PKTNET 20_KE2I 353
241020 15:05:08 >KK4DIV ? ?F> 39
241020 15:05:09 <KK4DIV ? ?FS -
241020 15:05:09 <KK4DIV ? ?FF
241020 15:05:09 >KK4DIV ? ?FQ
241020 15:05:10 |KK4DIV ? ?KK4DIV Disconnected
241020 15:05:33 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:05:33 <K3CHB ? ? *** CONNECTED
241020 15:05:33 >K3CHB ? ? c 3 k5dat-5
241020 15:05:33 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:05:33 ?K3CHB ? ? Script pause 2
241020 15:05:33 <K3CHB ? ? K5DAT-5 DATXR -
241020 15:05:33 <K3CHB ? ? Type ? for the basic list of commands.
241020 15:05:35 <K3CHB ? ? Pause Ok
241020 15:05:35 >K3CHB ? ? c 16 k3chb-7
241020 15:05:36 <K3CHB ? ?
241020 15:05:36 <K3CHB ? ? K5DAT-5:DATXR} Trying K3CHB-7...
241020 15:05:46 <K3CHB ? ?
241020 15:05:46 <K3CHB ? ? K5DAT-5:DATXR} Failure with K3CHB-7
241020 15:05:46 |K3CHB ? ? K3CHB Disconnected
241020 15:05:47 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:05:47 <K3CHB ? ? *** CONNECTED
241020 15:05:47 ?K3CHB ? ? Script pause 60
241020 15:06:47 <K3CHB ? ? Pause Ok
241020 15:06:47 >K3CHB ? ? c 3 ve3cgr-7
241020 15:06:48 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to BPQCGR:VE3CGR-7
241020 15:06:48 ?K3CHB ? ? Script pause 2
241020 15:06:48 <K3CHB ? ? Welcome to the VE3CGR-7 LinBPQ Node.
241020 15:06:48 <K3CHB ? ? BPQCGR:VE3CGR-7}
241020 15:06:50 <K3CHB ? ? Pause Ok
241020 15:06:50 >K3CHB ? ? c k3chb-7
241020 15:06:51 <K3CHB ? ? BPQCGR:VE3CGR-7} Downlink connect needs port number - C P CALLSIGN
241020 15:06:51 |K3CHB ? ? K3CHB Disconnected
241020 15:07:32 |N2UEM ? ? Connecting to BBS N2UEM
241020 15:07:32 <N2UEM ? ? *** CONNECTED
241020 15:07:32 >N2UEM ? ? C 3 N2UEM-7
241020 15:07:33 <N2UEM ? ? SHAWNO:K5DAT-7} Connected to FITWI:N2UEM-7
241020 15:07:33 >N2UEM ? ? BBS
241020 15:07:33 <N2UEM ? ? Welcome to Fitchburg WI BBS. Mark Acierno's BPQ32 Node.
241020 15:07:33 <N2UEM ? ? N2UEM> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD RMS
241020 15:07:34 <N2UEM ? ? FITWI:N2UEM-7} Connected to BBS
241020 15:07:34 <N2UEM ? ? [BPQ-6.0.21.1-B1FWIHJM$]
241020 15:07:34 <N2UEM ? ? Hello Lee. Latest Message is 5131, Last listed is 0
241020 15:07:34 <N2UEM ? ? de N2UEM>
241020 15:07:34 >N2UEM ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:07:34 >N2UEM ? ? FA B KE2I USA PKTNET 20_KE2I 353
241020 15:07:34 >N2UEM ? ? F> 39
241020 15:07:35 <N2UEM ? ? FS +
241020 15:07:35 | ? ? ? ? ?Compressed Message Comp Len 215 Msg Len 353 CRC dd2
241020 15:07:36 <N2UEM ? ? FF
241020 15:07:36 >N2UEM ? ? FQ
241020 15:07:37 |N2UEM ? ? N2UEM Disconnected
241020 15:09:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:09:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:09:31 >WA2UET-1 ?Hello Stan

241020 15:09:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:09:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:09:33 <WA2UET-1 ?FF
241020 15:09:33 >WA2UET-1 ?FQ
241020 15:09:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:11:04 |GB7CIP ? ?Incoming Connect from GB7CIP
241020 15:11:04 >GB7CIP ? ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:11:04 >GB7CIP ? ?K5DAT-1 BBS

241020 15:11:04 >GB7CIP ? ?>

241020 15:11:17 <GB7CIP ? ?[FBB-7.0.11-AHM$]
241020 15:11:17 >GB7CIP ? ?>
241020 15:11:20 <GB7CIP ? ?SB NEWS @ WW < EI2GYB $34562_EI2GYB
241020 15:11:20 >GB7CIP ? ?NO - BID
241020 15:11:20 >GB7CIP ? ?>
241020 15:11:23 <GB7CIP ? ?F>
241020 15:11:23 >GB7CIP ? ?*** DONE
241020 15:11:24 |GB7CIP ? ?GB7CIP Disconnected
241020 15:11:51 |AA6HF ? ? Connecting to BBS AA6HF
241020 15:11:51 |KD9KGQ ? ?Connecting to BBS KD9KGQ
241020 15:11:51 <KD9KGQ ? ?*** CONNECTED
241020 15:11:51 >KD9KGQ ? ?C 3 W9GM-7
241020 15:11:51 <AA6HF ? ? *** CONNECTED
241020 15:11:51 >AA6HF ? ? C 3 K5DAT-5
241020 15:11:52 <KD9KGQ ? ?SHAWNO:K5DAT-7} Connected to WILSE:W9GM-7
241020 15:11:52 ?KD9KGQ ? ?Script PAUSE 2
241020 15:11:52 <AA6HF ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:11:52 >AA6HF ? ? C 19 AA6HF-4
241020 15:11:52 <AA6HF ? ? K5DAT-5 DATXR -
241020 15:11:52 <AA6HF ? ? Type ? for the basic list of commands.
241020 15:11:53 <KD9KGQ ? ?Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
241020 15:11:53 <KD9KGQ ? ?Type ? (enter) for Commands
241020 15:11:53 <AA6HF ? ?
241020 15:11:53 <AA6HF ? ? K5DAT-5:DATXR} Trying AA6HF-4...
241020 15:11:54 <AA6HF ? ?
241020 15:11:54 <AA6HF ? ? K5DAT-5:DATXR} Connected to AA6HF-4
241020 15:11:54 <KD9KGQ ? ?Pause Ok
241020 15:11:54 >KD9KGQ ? ?C 4 KD9KGQ-7
241020 15:11:55 <AA6HF ? ? [JNOS-2.0p.1-B1FHIM$]
241020 15:11:55 <AA6HF ? ? >
241020 15:11:55 >AA6HF ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:11:55 >AA6HF ? ? FA B KE2I USA PKTNET 20_KE2I 353
241020 15:11:55 >AA6HF ? ? F> 39
241020 15:11:58 <AA6HF ? ? FS +
241020 15:11:58 | ? ? ? ? ?Compressed Message Comp Len 215 Msg Len 353 CRC dd2
241020 15:12:02 <AA6HF ? ? FA B KP3FT USA PKTNET 22722_KP3FT 1142
241020 15:12:02 ?AA6HF ? ? Message Rejected by BID Check
241020 15:12:02 <AA6HF ? ? F>
241020 15:12:02 >AA6HF ? ? FS -
241020 15:12:02 >AA6HF ? ? FF
241020 15:12:07 <AA6HF ? ? FQ
241020 15:12:07 |AA6HF ? ? AA6HF Disconnected
241020 15:12:22 |KB9SOZ ? ?Connecting to BBS KB9SOZ
241020 15:12:22 <KB9SOZ ? ?*** CONNECTED
241020 15:12:22 >KB9SOZ ? ?C 3 KB9SOZ-7
241020 15:12:23 <KB9SOZ ? ?SHAWNO:K5DAT-7} Connected to WI105:KB9SOZ-7
241020 15:12:23 >KB9SOZ ? ?BBS
241020 15:12:24 <KB9SOZ ? ?WI105:KB9SOZ-7} BBS CHAT CONNECT BYE INFO KBRD LISTEN NODES ROUTES PORTS USERS MHEARD
241020 15:12:24 <KB9SOZ ? ?WI105:KB9SOZ-7} Sorry, Application BBS is not running - Please try later
241020 15:12:24 |KB9SOZ ? ?KB9SOZ Disconnected
241020 15:12:25 |KB9SOZ ? ?Connecting to BBS KB9SOZ
241020 15:12:25 <KB9SOZ ? ?*** CONNECTED
241020 15:12:25 ?KB9SOZ ? ?Script PAUSE 60
241020 15:12:56 <KD9KGQ ? ?DISCONNECTED ?
241020 15:12:56 |KD9KGQ ? ?KD9KGQ Disconnected
241020 15:12:57 |KD9KGQ ? ?Connecting to BBS KD9KGQ
241020 15:12:57 <KD9KGQ ? ?*** CONNECTED
241020 15:12:57 ?KD9KGQ ? ?Script PAUSE 60
241020 15:13:25 <KB9SOZ ? ?Pause Ok
241020 15:13:25 >KB9SOZ ? ?C 2 N9HWP-7
241020 15:13:26 <KB9SOZ ? ?SHAWNO:K5DAT-7} Connected to HWPN0D:N9HWP-7
241020 15:13:26 ?KB9SOZ ? ?Script PAUSE 3
241020 15:13:27 <KB9SOZ ? ?N9HWP-7 BQP32 Node - Windows
241020 15:13:27 <KB9SOZ ? ?? for a list of commands
241020 15:13:29 <KB9SOZ ? ?Pause Ok
241020 15:13:29 >KB9SOZ ? ?C KB9SOZ-7
241020 15:13:32 <KB9SOZ ? ?HWPN0D:N9HWP-7} Connected to WI105:KB9SOZ-7
241020 15:13:32 >KB9SOZ ? ?BBS
241020 15:13:33 <KB9SOZ ? ?WI105:KB9SOZ-7} BBS CHAT CONNECT BYE INFO KBRD LISTEN NODES ROUTES PORTS USERS MHEARD
241020 15:13:35 <KB9SOZ ? ?WI105:KB9SOZ-7} Sorry, Application BBS is not running - Please try later
241020 15:13:57 <KD9KGQ ? ?Pause Ok
241020 15:13:57 >KD9KGQ ? ?C 3 KD9KGQ-7
241020 15:14:11 <KD9KGQ ? ?SHAWNO:K5DAT-7} Failure with KD9KGQ-7
241020 15:14:11 |KD9KGQ ? ?KD9KGQ Disconnected
241020 15:14:37 |KB9SOZ ? ?KB9SOZ Disconnected
241020 15:16:55 |KD5TCY-1 ?Incoming Connect from KD5TCY
241020 15:16:55 >KD5TCY-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:16:55 >KD5TCY-1 ?Hello Jackie

241020 15:16:55 >KD5TCY-1 ?de K5DAT BBS>

241020 15:16:56 <KD5TCY-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:16:56 <KD5TCY-1 ?FA B NS2B USA PKTNET 13813_NS2B 721
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B KX4AC USA PKTNET 1435_KX4AC 884
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B EI2GYB WW NEWS 34562_EI2GYB 7221
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B KP3FT USA PKTNET 22722_KP3FT 781
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?F> 96
241020 15:16:56 >KD5TCY-1 ?FS ----
241020 15:16:56 >KD5TCY-1 ?FF
241020 15:16:57 <KD5TCY-1 ?FQ
241020 15:16:57 |KD5TCY-1 ?KD5TCY-1 Disconnected
241020 15:17:30 |RMS ? ? ? Connecting to BBS RMS
241020 15:17:30 <RMS ? ? ? *** CONNECTED
241020 15:17:30 >RMS ? ? ? C 4 CMS
241020 15:17:31 <RMS ? ? ? Trying
241020 15:17:31 <RMS ? ? ? *** K5DAT-1 Connected to CMS
241020 15:17:31 <RMS ? ? ? [WL2K-5.0-B2FWIHJM$]
241020 15:17:31 <RMS ? ? ? ;PQ: 56017510
241020 15:17:31 <RMS ? ? ? CMS>
241020 15:17:31 >RMS ? ? ? ;FW: K5DAT-1 K5DAT|39634634
241020 15:17:31 >RMS ? ? ? [BPQ-6.0.24.45-B2FIHJM$]
241020 15:17:31 >RMS ? ? ? ;PR: 39634634
241020 15:17:31 >RMS ? ? ? ; WL2K DE K5DAT (EN54RS)
241020 15:17:31 >RMS ? ? ? FF
241020 15:17:32 <RMS ? ? ? FQ
241020 15:17:32 |RMS ? ? ? RMS Disconnected
241020 15:18:13 |WW2BSA ? ?Connecting to BBS WW2BSA
241020 15:18:13 <WW2BSA ? ?*** CONNECTED
241020 15:18:13 >WW2BSA ? ?C 3 WW2BSA-7
241020 15:18:14 <WW2BSA ? ?SHAWNO:K5DAT-7} Connected to HCANOD:WW2BSA-7
241020 15:18:14 >WW2BSA ? ?BBS
241020 15:18:15 <WW2BSA ? ?Enter 'INFO' for connection information.
241020 15:18:15 <WW2BSA ? ?HCANOD:WW2BSA-7} BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
241020 15:18:15 <WW2BSA ? ?HCANOD:WW2BSA-7} Connected to BBS
241020 15:18:18 <WW2BSA ? ?[BPQ-6.0.23.1-B1FWIHJM$]
241020 15:18:18 <WW2BSA ? ?Hello Lee Bengston. Latest Message is 15427, Last listed is 3270
241020 15:18:18 <WW2BSA ? ?de WW2BSA>
241020 15:18:18 >WW2BSA ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:18:18 >WW2BSA ? ?FA B KE2I USA PKTNET 20_KE2I 353
241020 15:18:18 >WW2BSA ? ?F> 39
241020 15:18:20 <WW2BSA ? ?FS -
241020 15:18:20 <WW2BSA ? ?FA B KE2I USA PKTNET 20_KE2I 400
241020 15:18:20 ?WW2BSA ? ?Message Rejected by BID Check
241020 15:18:20 <WW2BSA ? ?F> 40
241020 15:18:20 >WW2BSA ? ?FS -
241020 15:18:20 >WW2BSA ? ?FF
241020 15:18:25 <WW2BSA ? ?FQ
241020 15:18:25 |WW2BSA ? ?WW2BSA Disconnected
241020 15:18:46 |KP3FT ? ? Connecting to BBS KP3FT
241020 15:18:46 <KP3FT ? ? *** CONNECTED
241020 15:18:46 ?KP3FT ? ? Script MSGTYPES PR
241020 15:18:46 >KP3FT ? ? c 3 nc8q-7
241020 15:18:47 <KP3FT ? ? SHAWNO:K5DAT-7} Connected to DAYTON:NC8Q-7
241020 15:18:47 >KP3FT ? ? c n3mel-2
241020 15:18:47 <KP3FT ? ? Welcome to NC8Q-7 BPQ Node.
241020 15:18:47 <KP3FT ? ? Type ? for list of available commands.
241020 15:18:48 <KP3FT ? ? DAYTON:NC8Q-7} Connected to MELBBS:N3MEL-2
241020 15:18:49 <KP3FT ? ? [BPQ-6.0.24.45-B1FWIHJM$]
241020 15:18:49 <KP3FT ? ?
241020 15:18:49 <KP3FT ? ? de N3MEL>
241020 15:18:49 >KP3FT ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:18:49 >KP3FT ? ? ; MSGTYPES ?PR
241020 15:18:49 >KP3FT ? ? FF
241020 15:18:50 |K5GEO-1 ? Incoming Connect from K5GEO
241020 15:18:50 >K5GEO-1 ? [BPQ-6.0.24.45-B12FWIHJM$]
241020 15:18:50 >K5GEO-1 ? Hello George

241020 15:18:50 >K5GEO-1 ? de K5DAT BBS>

241020 15:18:51 <KP3FT ? ? FQ
241020 15:18:51 |KP3FT ? ? KP3FT Disconnected
241020 15:18:51 <K5GEO-1 ? [BPQ-6.0.24.42-B1FIHJM$]
241020 15:18:51 <K5GEO-1 ? ; MSGTYPES ?PTBR9999
241020 15:18:51 <K5GEO-1 ? FF
241020 15:18:51 >K5GEO-1 ? FQ
241020 15:18:53 |K5GEO-1 ? K5GEO-1 Disconnected
241020 15:19:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:19:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:19:31 >WA2UET-1 ?Hello Stan

241020 15:19:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:19:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:19:33 <WA2UET-1 ?FF
241020 15:19:33 >WA2UET-1 ?FQ
241020 15:19:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:26:22 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:26:22 <K3CHB ? ? *** CONNECTED
241020 15:26:22 >K3CHB ? ? c 3 k5dat-5
241020 15:26:23 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:26:23 ?K3CHB ? ? Script pause 2
241020 15:26:23 <K3CHB ? ? K5DAT-5 DATXR -
241020 15:26:23 <K3CHB ? ? Type ? for the basic list of commands.
241020 15:26:25 <K3CHB ? ? Pause Ok
241020 15:26:25 >K3CHB ? ? c 16 k3chb-7
241020 15:26:25 <K3CHB ? ?
241020 15:26:25 <K3CHB ? ? K5DAT-5:DATXR} Trying K3CHB-7...
241020 15:26:35 <K3CHB ? ?
241020 15:26:35 <K3CHB ? ? K5DAT-5:DATXR} Failure with K3CHB-7
241020 15:26:35 |K3CHB ? ? K3CHB Disconnected
241020 15:26:36 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:26:36 <K3CHB ? ? *** CONNECTED
241020 15:26:36 ?K3CHB ? ? Script pause 60
241020 15:27:22 |DTXBBS ? ?Connecting to BBS DTXBBS
241020 15:27:22 <DTXBBS ? ?*** CONNECTED
241020 15:27:22 >DTXBBS ? ?c 2 w1dtx-7
241020 15:27:35 <DTXBBS ? ?SHAWNO:K5DAT-7} Failure with W1DTX-7
241020 15:27:36 |DTXBBS ? ?DTXBBS Disconnected
241020 15:27:36 <K3CHB ? ? Pause Ok
241020 15:27:36 >K3CHB ? ? c 3 ve3cgr-7
241020 15:27:37 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to BPQCGR:VE3CGR-7
241020 15:27:37 ?K3CHB ? ? Script pause 2
241020 15:27:38 <K3CHB ? ? Welcome to the VE3CGR-7 LinBPQ Node.
241020 15:27:38 <K3CHB ? ? BPQCGR:VE3CGR-7}
241020 15:27:39 <K3CHB ? ? Pause Ok
241020 15:27:39 >K3CHB ? ? c k3chb-7
241020 15:27:40 <K3CHB ? ? BPQCGR:VE3CGR-7} Downlink connect needs port number - C P CALLSIGN
241020 15:27:40 |K3CHB ? ? K3CHB Disconnected
241020 15:27:57 |KA3VSP ? ?Connecting to BBS KA3VSP
241020 15:27:57 <KA3VSP ? ?*** CONNECTED
241020 15:27:57 ?KA3VSP ? ?Script MSGTYPES PR
241020 15:27:57 >KA3VSP ? ?C 3 W9GM-7
241020 15:27:58 <KA3VSP ? ?SHAWNO:K5DAT-7} Connected to WILSE:W9GM-7
241020 15:27:58 >KA3VSP ? ?C 4 KA3VSP-7
241020 15:27:58 <KA3VSP ? ?Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
241020 15:27:58 <KA3VSP ? ?Type ? (enter) for Commands
241020 15:28:00 <KA3VSP ? ?WILSE:W9GM-7} Connected to NCDE:KA3VSP-7
241020 15:28:00 >KA3VSP ? ?BBS
241020 15:28:00 <KA3VSP ? ?Welcome to the {NCDE} BPQ Node - New Castle, DE (FM29ep)
241020 15:28:00 <KA3VSP ? ?KA3VSP> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
241020 15:28:01 <KA3VSP ? ?NCDE:KA3VSP-7} Connected to BBS
241020 15:28:02 <KA3VSP ? ?[BPQ-6.0.24.1-B12FWIHJM$]
241020 15:28:02 <KA3VSP ? ?
241020 15:28:02 <KA3VSP ? ?de KA3VSP>
241020 15:28:02 >KA3VSP ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:28:02 >KA3VSP ? ?; MSGTYPES ?PR
241020 15:28:02 >KA3VSP ? ?FF
241020 15:28:04 <KA3VSP ? ?FQ
241020 15:28:04 |KA3VSP ? ?KA3VSP Disconnected
241020 15:29:22 |W7EES ? ? Connecting to BBS W7EES
241020 15:29:22 <W7EES ? ? *** CONNECTED
241020 15:29:22 >W7EES ? ? ATT 7
241020 15:29:22 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241020 15:29:22 >W7EES ? ? BW2300
241020 15:29:23 <W7EES ? ? VARA} OK
241020 15:29:23 >W7EES ? ? RADIO 14.1065 USB
241020 15:29:23 <W7EES ? ? Mode and Frequency Set OK
241020 15:29:23 >W7EES ? ? C W7EES
241020 15:29:24 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241020 15:29:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:29:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:29:31 >WA2UET-1 ?Hello Stan

241020 15:29:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:29:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:29:33 <WA2UET-1 ?FF
241020 15:29:33 >WA2UET-1 ?FQ
241020 15:29:34 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241020 15:29:34 |W7EES ? ? W7EES Disconnected
241020 15:29:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:29:35 |W7EES ? ? Connecting to BBS W7EES
241020 15:29:35 <W7EES ? ? *** CONNECTED
241020 15:29:35 >W7EES ? ? D
241020 15:29:35 <W7EES ? ? SHAWNO:K5DAT-7} Invalid command - Enter ? for command list
241020 15:29:35 |W7EES ? ? W7EES Disconnected
241020 15:31:55 |GB7BED ? ?Incoming Connect from GB7BED
241020 15:31:55 >GB7BED ? ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:31:55 >GB7BED ? ?Hello Hugh

241020 15:31:55 >GB7BED ? ?de K5DAT BBS>

241020 15:31:57 <GB7BED ? ?[BPQ-6.0.24.33-B1FIHJM$]
241020 15:31:57 <GB7BED ? ?FF
241020 15:31:57 >GB7BED ? ?FQ
241020 15:31:58 |GB7BED ? ?GB7BED Disconnected
241020 15:32:07 |N9LYA ? ? Connecting to BBS N9LYA
241020 15:32:07 <N9LYA ? ? *** CONNECTED
241020 15:32:07 ?N9LYA ? ? Script MSGTYPES PTBR
241020 15:32:07 >N9LYA ? ? ATT 7
241020 15:32:07 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use
241020 15:32:07 |N9LYA ? ? N9LYA Disconnected
241020 15:32:08 |N9LYA ? ? Connecting to BBS N9LYA
241020 15:32:08 <N9LYA ? ? *** CONNECTED
241020 15:32:08 ?N9LYA ? ? Script PAUSE 30
241020 15:32:38 <N9LYA ? ? Pause Ok
241020 15:32:38 ?N9LYA ? ? Script MSGTYPES PTBR
241020 15:32:38 >N9LYA ? ? ATT 7
241020 15:32:38 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use
241020 15:32:38 |N9LYA ? ? N9LYA Disconnected


73,
Lee K5DAT


On Sat, Oct 19, 2024 at 1:57?PM John G8BPQ via <john.wiseman=[email protected]> wrote:
This is rather odd. CLEANTXBUFFER should only be sent when a session times out and this is happening within a second of the connect attempt. I suppose it is possible that the CLEANTXBUFFER is from a previous session, but it is still odd. I'll see if I can work out what could be happening.

When this happens what does the TNC state show in the VARA driver window?

73,
John

On 19/10/2024 15:25, Lee Bengston wrote:
Greetings.

I've been finding the radio stuck on the same frequency lately. It's always the VARA port that is considered to be still in use.? It happened again this morning, and below is what's in the BBS log.? The radio is a Yaesu FTdx10.

241019 13:34:19 |N3MEL ? ? Connecting to BBS N3MEL
241019 13:34:19 <N3MEL ? ? *** CONNECTED
241019 13:34:19 ?N3MEL ? ? Script MSGTYPES PTBR
241019 13:34:19 >N3MEL ? ? ATT 7
241019 13:34:19 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241019 13:34:19 >N3MEL ? ? BW500
241019 13:34:20 <N3MEL ? ? VARA} OK
241019 13:34:20 >N3MEL ? ? RADIO 14.1065 USB
241019 13:34:20 <N3MEL ? ? Mode and Frequency Set OK
241019 13:34:20 >N3MEL ? ? C N3MEL-2
241019 13:34:21 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 13:35:06 <N3MEL ? ? VARA} Failure with K5DAT-1 N3MEL--
241019 13:35:06 |N3MEL ? ? N3MEL Disconnected

Subsequent attempts to forward via VARA fail because the port is not released.

241019 13:36:56 |N9LYA ? ? Connecting to BBS N9LYA
241019 13:36:56 <N9LYA ? ? *** CONNECTED
241019 13:36:56 ?N9LYA ? ? Script MSGTYPES PTBR
241019 13:36:56 >N9LYA ? ? ATT 7
241019 13:36:56 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use

241019 13:47:00 |K7EK ? ? ?Connecting to BBS K7EK
241019 13:47:00 <K7EK ? ? ?*** CONNECTED
241019 13:47:00 ?K7EK ? ? ?Script MSGTYPES PTBR
241019 13:47:00 >K7EK ? ? ?ATT 7
241019 13:47:00 <K7EK ? ? ?SHAWNO:K5DAT-7} Error - Port in use
241019 13:47:00 |K7EK ? ? ?K7EK Disconnected

Searching through the log for " CLEANTXBUFFER BUFFEREMPTY", found an older instance where the same thing happened.

241019 02:04:54 |W7EES ? ? Connecting to BBS W7EES
241019 02:04:54 <W7EES ? ? *** CONNECTED
241019 02:04:54 >W7EES ? ? ATT 7
241019 02:04:54 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241019 02:04:54 >W7EES ? ? BW2300
241019 02:04:55 <W7EES ? ? VARA} OK
241019 02:04:55 >W7EES ? ? RADIO 7.100 USB
241019 02:04:55 <W7EES ? ? Mode and Frequency Set OK
241019 02:04:55 >W7EES ? ? C W7EES
241019 02:04:56 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 02:05:06 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241019 02:05:06 |W7EES ? ? W7EES Disconnected

Sure enough, the next attempt to use VARA port 7 (14 minutes later) failed:

241019 02:19:19 |K1AJD ? ? Connecting to BBS K1AJD
241019 02:19:20 <K1AJD ? ? *** CONNECTED
241019 02:19:20 ?K1AJD ? ? Script MSGTYPES PTBR
241019 02:19:20 >K1AJD ? ? ATT 7
241019 02:19:20 <K1AJD ? ? SHAWNO:K5DAT-7} Error - Port in use
241019 02:19:20 |K1AJD ? ? K1AJD Disconnected

This looks like it's at least partially a VARA issue, but it seems BPQ should still de-attach the port.

73,
Lee K5DAT
Re: VARA Error & Port stays attached

 

I found the radio sitting on one frequency, so I checked the status and saw what is shown below.

image.png

As it polls, the channel state can change from clear to busy, then change back.

image.png

Now I'm not sure that CLEANTXBUFFER BUFFEREMPTY is related to the root cause.

241020 15:02:43 |N3MEL ? ? Connecting to BBS N3MEL
241020 15:02:44 <N3MEL ? ? *** CONNECTED
241020 15:02:44 ?N3MEL ? ? Script MSGTYPES PTBR
241020 15:02:44 >N3MEL ? ? ATT 7
241020 15:02:44 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241020 15:02:44 >N3MEL ? ? BW500
241020 15:02:44 <N3MEL ? ? VARA} OK
241020 15:02:44 >N3MEL ? ? RADIO 14.1065 USB
241020 15:02:44 <N3MEL ? ? Mode and Frequency Set OK
241020 15:02:44 >N3MEL ? ? C N3MEL-2
241020 15:02:45 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241020 15:02:55 <N3MEL ? ? Sorry, Can't Connect - Channel is busy
241020 15:02:55 |N3MEL ? ? N3MEL Disconnected
241020 15:02:56 |N3MEL ? ? Connecting to BBS N3MEL
241020 15:02:56 <N3MEL ? ? *** CONNECTED
241020 15:02:56 >N3MEL ? ? D
241020 15:02:56 <N3MEL ? ? SHAWNO:K5DAT-7} Invalid command - Enter ? for command list
241020 15:02:56 |N3MEL ? ? N3MEL Disconnected
241020 15:03:49 |DTXBBS ? ?Connecting to BBS DTXBBS
241020 15:03:49 <DTXBBS ? ?*** CONNECTED
241020 15:03:49 >DTXBBS ? ?c 2 w1dtx-7
241020 15:04:03 <DTXBBS ? ?SHAWNO:K5DAT-7} Failure with W1DTX-7
241020 15:04:03 |DTXBBS ? ?DTXBBS Disconnected
241020 15:05:05 |KK4DIV ? ?Connecting to BBS KK4DIV
241020 15:05:05 <KK4DIV ? ?*** CONNECTED
241020 15:05:05 >KK4DIV ? ?C KK4DIV-7
241020 15:05:06 <KK4DIV ? ?SHAWNO:K5DAT-7} Connected to LHNOD:KK4DIV-7
241020 15:05:06 >KK4DIV ? ?BBS
241020 15:05:07 <KK4DIV ? ?KK4DIV Packet Node in Lynn Haven, FL
241020 15:05:07 <KK4DIV ? ?LHNOD:KK4DIV-7} BBS RMS CHAT SYSOP CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD
241020 15:05:07 <KK4DIV ? ?LHNOD:KK4DIV-7} Connected to BBS
241020 15:05:08 <KK4DIV ? ?[BPQ-6.0.24.1-B2FWIHJM$]
241020 15:05:08 <KK4DIV ? ?Hello Lee. Latest Message is 23356, Last listed is 0
241020 15:05:08 <KK4DIV ? ?de KK4DIV>
241020 15:05:08 >KK4DIV ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:05:08 >KK4DIV ? ?FA B KE2I USA PKTNET 20_KE2I 353
241020 15:05:08 >KK4DIV ? ?F> 39
241020 15:05:09 <KK4DIV ? ?FS -
241020 15:05:09 <KK4DIV ? ?FF
241020 15:05:09 >KK4DIV ? ?FQ
241020 15:05:10 |KK4DIV ? ?KK4DIV Disconnected
241020 15:05:33 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:05:33 <K3CHB ? ? *** CONNECTED
241020 15:05:33 >K3CHB ? ? c 3 k5dat-5
241020 15:05:33 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:05:33 ?K3CHB ? ? Script pause 2
241020 15:05:33 <K3CHB ? ? K5DAT-5 DATXR -
241020 15:05:33 <K3CHB ? ? Type ? for the basic list of commands.
241020 15:05:35 <K3CHB ? ? Pause Ok
241020 15:05:35 >K3CHB ? ? c 16 k3chb-7
241020 15:05:36 <K3CHB ? ?
241020 15:05:36 <K3CHB ? ? K5DAT-5:DATXR} Trying K3CHB-7...
241020 15:05:46 <K3CHB ? ?
241020 15:05:46 <K3CHB ? ? K5DAT-5:DATXR} Failure with K3CHB-7
241020 15:05:46 |K3CHB ? ? K3CHB Disconnected
241020 15:05:47 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:05:47 <K3CHB ? ? *** CONNECTED
241020 15:05:47 ?K3CHB ? ? Script pause 60
241020 15:06:47 <K3CHB ? ? Pause Ok
241020 15:06:47 >K3CHB ? ? c 3 ve3cgr-7
241020 15:06:48 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to BPQCGR:VE3CGR-7
241020 15:06:48 ?K3CHB ? ? Script pause 2
241020 15:06:48 <K3CHB ? ? Welcome to the VE3CGR-7 LinBPQ Node.
241020 15:06:48 <K3CHB ? ? BPQCGR:VE3CGR-7}
241020 15:06:50 <K3CHB ? ? Pause Ok
241020 15:06:50 >K3CHB ? ? c k3chb-7
241020 15:06:51 <K3CHB ? ? BPQCGR:VE3CGR-7} Downlink connect needs port number - C P CALLSIGN
241020 15:06:51 |K3CHB ? ? K3CHB Disconnected
241020 15:07:32 |N2UEM ? ? Connecting to BBS N2UEM
241020 15:07:32 <N2UEM ? ? *** CONNECTED
241020 15:07:32 >N2UEM ? ? C 3 N2UEM-7
241020 15:07:33 <N2UEM ? ? SHAWNO:K5DAT-7} Connected to FITWI:N2UEM-7
241020 15:07:33 >N2UEM ? ? BBS
241020 15:07:33 <N2UEM ? ? Welcome to Fitchburg WI BBS. Mark Acierno's BPQ32 Node.
241020 15:07:33 <N2UEM ? ? N2UEM> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD RMS
241020 15:07:34 <N2UEM ? ? FITWI:N2UEM-7} Connected to BBS
241020 15:07:34 <N2UEM ? ? [BPQ-6.0.21.1-B1FWIHJM$]
241020 15:07:34 <N2UEM ? ? Hello Lee. Latest Message is 5131, Last listed is 0
241020 15:07:34 <N2UEM ? ? de N2UEM>
241020 15:07:34 >N2UEM ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:07:34 >N2UEM ? ? FA B KE2I USA PKTNET 20_KE2I 353
241020 15:07:34 >N2UEM ? ? F> 39
241020 15:07:35 <N2UEM ? ? FS +
241020 15:07:35 | ? ? ? ? ?Compressed Message Comp Len 215 Msg Len 353 CRC dd2
241020 15:07:36 <N2UEM ? ? FF
241020 15:07:36 >N2UEM ? ? FQ
241020 15:07:37 |N2UEM ? ? N2UEM Disconnected
241020 15:09:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:09:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:09:31 >WA2UET-1 ?Hello Stan

241020 15:09:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:09:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:09:33 <WA2UET-1 ?FF
241020 15:09:33 >WA2UET-1 ?FQ
241020 15:09:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:11:04 |GB7CIP ? ?Incoming Connect from GB7CIP
241020 15:11:04 >GB7CIP ? ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:11:04 >GB7CIP ? ?K5DAT-1 BBS

241020 15:11:04 >GB7CIP ? ?>

241020 15:11:17 <GB7CIP ? ?[FBB-7.0.11-AHM$]
241020 15:11:17 >GB7CIP ? ?>
241020 15:11:20 <GB7CIP ? ?SB NEWS @ WW < EI2GYB $34562_EI2GYB
241020 15:11:20 >GB7CIP ? ?NO - BID
241020 15:11:20 >GB7CIP ? ?>
241020 15:11:23 <GB7CIP ? ?F>
241020 15:11:23 >GB7CIP ? ?*** DONE
241020 15:11:24 |GB7CIP ? ?GB7CIP Disconnected
241020 15:11:51 |AA6HF ? ? Connecting to BBS AA6HF
241020 15:11:51 |KD9KGQ ? ?Connecting to BBS KD9KGQ
241020 15:11:51 <KD9KGQ ? ?*** CONNECTED
241020 15:11:51 >KD9KGQ ? ?C 3 W9GM-7
241020 15:11:51 <AA6HF ? ? *** CONNECTED
241020 15:11:51 >AA6HF ? ? C 3 K5DAT-5
241020 15:11:52 <KD9KGQ ? ?SHAWNO:K5DAT-7} Connected to WILSE:W9GM-7
241020 15:11:52 ?KD9KGQ ? ?Script PAUSE 2
241020 15:11:52 <AA6HF ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:11:52 >AA6HF ? ? C 19 AA6HF-4
241020 15:11:52 <AA6HF ? ? K5DAT-5 DATXR -
241020 15:11:52 <AA6HF ? ? Type ? for the basic list of commands.
241020 15:11:53 <KD9KGQ ? ?Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
241020 15:11:53 <KD9KGQ ? ?Type ? (enter) for Commands
241020 15:11:53 <AA6HF ? ?
241020 15:11:53 <AA6HF ? ? K5DAT-5:DATXR} Trying AA6HF-4...
241020 15:11:54 <AA6HF ? ?
241020 15:11:54 <AA6HF ? ? K5DAT-5:DATXR} Connected to AA6HF-4
241020 15:11:54 <KD9KGQ ? ?Pause Ok
241020 15:11:54 >KD9KGQ ? ?C 4 KD9KGQ-7
241020 15:11:55 <AA6HF ? ? [JNOS-2.0p.1-B1FHIM$]
241020 15:11:55 <AA6HF ? ? >
241020 15:11:55 >AA6HF ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:11:55 >AA6HF ? ? FA B KE2I USA PKTNET 20_KE2I 353
241020 15:11:55 >AA6HF ? ? F> 39
241020 15:11:58 <AA6HF ? ? FS +
241020 15:11:58 | ? ? ? ? ?Compressed Message Comp Len 215 Msg Len 353 CRC dd2
241020 15:12:02 <AA6HF ? ? FA B KP3FT USA PKTNET 22722_KP3FT 1142
241020 15:12:02 ?AA6HF ? ? Message Rejected by BID Check
241020 15:12:02 <AA6HF ? ? F>
241020 15:12:02 >AA6HF ? ? FS -
241020 15:12:02 >AA6HF ? ? FF
241020 15:12:07 <AA6HF ? ? FQ
241020 15:12:07 |AA6HF ? ? AA6HF Disconnected
241020 15:12:22 |KB9SOZ ? ?Connecting to BBS KB9SOZ
241020 15:12:22 <KB9SOZ ? ?*** CONNECTED
241020 15:12:22 >KB9SOZ ? ?C 3 KB9SOZ-7
241020 15:12:23 <KB9SOZ ? ?SHAWNO:K5DAT-7} Connected to WI105:KB9SOZ-7
241020 15:12:23 >KB9SOZ ? ?BBS
241020 15:12:24 <KB9SOZ ? ?WI105:KB9SOZ-7} BBS CHAT CONNECT BYE INFO KBRD LISTEN NODES ROUTES PORTS USERS MHEARD
241020 15:12:24 <KB9SOZ ? ?WI105:KB9SOZ-7} Sorry, Application BBS is not running - Please try later
241020 15:12:24 |KB9SOZ ? ?KB9SOZ Disconnected
241020 15:12:25 |KB9SOZ ? ?Connecting to BBS KB9SOZ
241020 15:12:25 <KB9SOZ ? ?*** CONNECTED
241020 15:12:25 ?KB9SOZ ? ?Script PAUSE 60
241020 15:12:56 <KD9KGQ ? ?DISCONNECTED ?
241020 15:12:56 |KD9KGQ ? ?KD9KGQ Disconnected
241020 15:12:57 |KD9KGQ ? ?Connecting to BBS KD9KGQ
241020 15:12:57 <KD9KGQ ? ?*** CONNECTED
241020 15:12:57 ?KD9KGQ ? ?Script PAUSE 60
241020 15:13:25 <KB9SOZ ? ?Pause Ok
241020 15:13:25 >KB9SOZ ? ?C 2 N9HWP-7
241020 15:13:26 <KB9SOZ ? ?SHAWNO:K5DAT-7} Connected to HWPN0D:N9HWP-7
241020 15:13:26 ?KB9SOZ ? ?Script PAUSE 3
241020 15:13:27 <KB9SOZ ? ?N9HWP-7 BQP32 Node - Windows
241020 15:13:27 <KB9SOZ ? ?? for a list of commands
241020 15:13:29 <KB9SOZ ? ?Pause Ok
241020 15:13:29 >KB9SOZ ? ?C KB9SOZ-7
241020 15:13:32 <KB9SOZ ? ?HWPN0D:N9HWP-7} Connected to WI105:KB9SOZ-7
241020 15:13:32 >KB9SOZ ? ?BBS
241020 15:13:33 <KB9SOZ ? ?WI105:KB9SOZ-7} BBS CHAT CONNECT BYE INFO KBRD LISTEN NODES ROUTES PORTS USERS MHEARD
241020 15:13:35 <KB9SOZ ? ?WI105:KB9SOZ-7} Sorry, Application BBS is not running - Please try later
241020 15:13:57 <KD9KGQ ? ?Pause Ok
241020 15:13:57 >KD9KGQ ? ?C 3 KD9KGQ-7
241020 15:14:11 <KD9KGQ ? ?SHAWNO:K5DAT-7} Failure with KD9KGQ-7
241020 15:14:11 |KD9KGQ ? ?KD9KGQ Disconnected
241020 15:14:37 |KB9SOZ ? ?KB9SOZ Disconnected
241020 15:16:55 |KD5TCY-1 ?Incoming Connect from KD5TCY
241020 15:16:55 >KD5TCY-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:16:55 >KD5TCY-1 ?Hello Jackie

241020 15:16:55 >KD5TCY-1 ?de K5DAT BBS>

241020 15:16:56 <KD5TCY-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:16:56 <KD5TCY-1 ?FA B NS2B USA PKTNET 13813_NS2B 721
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B KX4AC USA PKTNET 1435_KX4AC 884
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B EI2GYB WW NEWS 34562_EI2GYB 7221
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?FA B KP3FT USA PKTNET 22722_KP3FT 781
241020 15:16:56 ?KD5TCY-1 ?Message Rejected by BID Check
241020 15:16:56 <KD5TCY-1 ?F> 96
241020 15:16:56 >KD5TCY-1 ?FS ----
241020 15:16:56 >KD5TCY-1 ?FF
241020 15:16:57 <KD5TCY-1 ?FQ
241020 15:16:57 |KD5TCY-1 ?KD5TCY-1 Disconnected
241020 15:17:30 |RMS ? ? ? Connecting to BBS RMS
241020 15:17:30 <RMS ? ? ? *** CONNECTED
241020 15:17:30 >RMS ? ? ? C 4 CMS
241020 15:17:31 <RMS ? ? ? Trying
241020 15:17:31 <RMS ? ? ? *** K5DAT-1 Connected to CMS
241020 15:17:31 <RMS ? ? ? [WL2K-5.0-B2FWIHJM$]
241020 15:17:31 <RMS ? ? ? ;PQ: 56017510
241020 15:17:31 <RMS ? ? ? CMS>
241020 15:17:31 >RMS ? ? ? ;FW: K5DAT-1 K5DAT|39634634
241020 15:17:31 >RMS ? ? ? [BPQ-6.0.24.45-B2FIHJM$]
241020 15:17:31 >RMS ? ? ? ;PR: 39634634
241020 15:17:31 >RMS ? ? ? ; WL2K DE K5DAT (EN54RS)
241020 15:17:31 >RMS ? ? ? FF
241020 15:17:32 <RMS ? ? ? FQ
241020 15:17:32 |RMS ? ? ? RMS Disconnected
241020 15:18:13 |WW2BSA ? ?Connecting to BBS WW2BSA
241020 15:18:13 <WW2BSA ? ?*** CONNECTED
241020 15:18:13 >WW2BSA ? ?C 3 WW2BSA-7
241020 15:18:14 <WW2BSA ? ?SHAWNO:K5DAT-7} Connected to HCANOD:WW2BSA-7
241020 15:18:14 >WW2BSA ? ?BBS
241020 15:18:15 <WW2BSA ? ?Enter 'INFO' for connection information.
241020 15:18:15 <WW2BSA ? ?HCANOD:WW2BSA-7} BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
241020 15:18:15 <WW2BSA ? ?HCANOD:WW2BSA-7} Connected to BBS
241020 15:18:18 <WW2BSA ? ?[BPQ-6.0.23.1-B1FWIHJM$]
241020 15:18:18 <WW2BSA ? ?Hello Lee Bengston. Latest Message is 15427, Last listed is 3270
241020 15:18:18 <WW2BSA ? ?de WW2BSA>
241020 15:18:18 >WW2BSA ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:18:18 >WW2BSA ? ?FA B KE2I USA PKTNET 20_KE2I 353
241020 15:18:18 >WW2BSA ? ?F> 39
241020 15:18:20 <WW2BSA ? ?FS -
241020 15:18:20 <WW2BSA ? ?FA B KE2I USA PKTNET 20_KE2I 400
241020 15:18:20 ?WW2BSA ? ?Message Rejected by BID Check
241020 15:18:20 <WW2BSA ? ?F> 40
241020 15:18:20 >WW2BSA ? ?FS -
241020 15:18:20 >WW2BSA ? ?FF
241020 15:18:25 <WW2BSA ? ?FQ
241020 15:18:25 |WW2BSA ? ?WW2BSA Disconnected
241020 15:18:46 |KP3FT ? ? Connecting to BBS KP3FT
241020 15:18:46 <KP3FT ? ? *** CONNECTED
241020 15:18:46 ?KP3FT ? ? Script MSGTYPES PR
241020 15:18:46 >KP3FT ? ? c 3 nc8q-7
241020 15:18:47 <KP3FT ? ? SHAWNO:K5DAT-7} Connected to DAYTON:NC8Q-7
241020 15:18:47 >KP3FT ? ? c n3mel-2
241020 15:18:47 <KP3FT ? ? Welcome to NC8Q-7 BPQ Node.
241020 15:18:47 <KP3FT ? ? Type ? for list of available commands.
241020 15:18:48 <KP3FT ? ? DAYTON:NC8Q-7} Connected to MELBBS:N3MEL-2
241020 15:18:49 <KP3FT ? ? [BPQ-6.0.24.45-B1FWIHJM$]
241020 15:18:49 <KP3FT ? ?
241020 15:18:49 <KP3FT ? ? de N3MEL>
241020 15:18:49 >KP3FT ? ? [BPQ-6.0.24.45-B1FIHJM$]
241020 15:18:49 >KP3FT ? ? ; MSGTYPES ?PR
241020 15:18:49 >KP3FT ? ? FF
241020 15:18:50 |K5GEO-1 ? Incoming Connect from K5GEO
241020 15:18:50 >K5GEO-1 ? [BPQ-6.0.24.45-B12FWIHJM$]
241020 15:18:50 >K5GEO-1 ? Hello George

241020 15:18:50 >K5GEO-1 ? de K5DAT BBS>

241020 15:18:51 <KP3FT ? ? FQ
241020 15:18:51 |KP3FT ? ? KP3FT Disconnected
241020 15:18:51 <K5GEO-1 ? [BPQ-6.0.24.42-B1FIHJM$]
241020 15:18:51 <K5GEO-1 ? ; MSGTYPES ?PTBR9999
241020 15:18:51 <K5GEO-1 ? FF
241020 15:18:51 >K5GEO-1 ? FQ
241020 15:18:53 |K5GEO-1 ? K5GEO-1 Disconnected
241020 15:19:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:19:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:19:31 >WA2UET-1 ?Hello Stan

241020 15:19:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:19:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:19:33 <WA2UET-1 ?FF
241020 15:19:33 >WA2UET-1 ?FQ
241020 15:19:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:26:22 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:26:22 <K3CHB ? ? *** CONNECTED
241020 15:26:22 >K3CHB ? ? c 3 k5dat-5
241020 15:26:23 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to DATXR:K5DAT-5
241020 15:26:23 ?K3CHB ? ? Script pause 2
241020 15:26:23 <K3CHB ? ? K5DAT-5 DATXR -
241020 15:26:23 <K3CHB ? ? Type ? for the basic list of commands.
241020 15:26:25 <K3CHB ? ? Pause Ok
241020 15:26:25 >K3CHB ? ? c 16 k3chb-7
241020 15:26:25 <K3CHB ? ?
241020 15:26:25 <K3CHB ? ? K5DAT-5:DATXR} Trying K3CHB-7...
241020 15:26:35 <K3CHB ? ?
241020 15:26:35 <K3CHB ? ? K5DAT-5:DATXR} Failure with K3CHB-7
241020 15:26:35 |K3CHB ? ? K3CHB Disconnected
241020 15:26:36 |K3CHB ? ? Connecting to BBS K3CHB
241020 15:26:36 <K3CHB ? ? *** CONNECTED
241020 15:26:36 ?K3CHB ? ? Script pause 60
241020 15:27:22 |DTXBBS ? ?Connecting to BBS DTXBBS
241020 15:27:22 <DTXBBS ? ?*** CONNECTED
241020 15:27:22 >DTXBBS ? ?c 2 w1dtx-7
241020 15:27:35 <DTXBBS ? ?SHAWNO:K5DAT-7} Failure with W1DTX-7
241020 15:27:36 |DTXBBS ? ?DTXBBS Disconnected
241020 15:27:36 <K3CHB ? ? Pause Ok
241020 15:27:36 >K3CHB ? ? c 3 ve3cgr-7
241020 15:27:37 <K3CHB ? ? SHAWNO:K5DAT-7} Connected to BPQCGR:VE3CGR-7
241020 15:27:37 ?K3CHB ? ? Script pause 2
241020 15:27:38 <K3CHB ? ? Welcome to the VE3CGR-7 LinBPQ Node.
241020 15:27:38 <K3CHB ? ? BPQCGR:VE3CGR-7}
241020 15:27:39 <K3CHB ? ? Pause Ok
241020 15:27:39 >K3CHB ? ? c k3chb-7
241020 15:27:40 <K3CHB ? ? BPQCGR:VE3CGR-7} Downlink connect needs port number - C P CALLSIGN
241020 15:27:40 |K3CHB ? ? K3CHB Disconnected
241020 15:27:57 |KA3VSP ? ?Connecting to BBS KA3VSP
241020 15:27:57 <KA3VSP ? ?*** CONNECTED
241020 15:27:57 ?KA3VSP ? ?Script MSGTYPES PR
241020 15:27:57 >KA3VSP ? ?C 3 W9GM-7
241020 15:27:58 <KA3VSP ? ?SHAWNO:K5DAT-7} Connected to WILSE:W9GM-7
241020 15:27:58 >KA3VSP ? ?C 4 KA3VSP-7
241020 15:27:58 <KA3VSP ? ?Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
241020 15:27:58 <KA3VSP ? ?Type ? (enter) for Commands
241020 15:28:00 <KA3VSP ? ?WILSE:W9GM-7} Connected to NCDE:KA3VSP-7
241020 15:28:00 >KA3VSP ? ?BBS
241020 15:28:00 <KA3VSP ? ?Welcome to the {NCDE} BPQ Node - New Castle, DE (FM29ep)
241020 15:28:00 <KA3VSP ? ?KA3VSP> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
241020 15:28:01 <KA3VSP ? ?NCDE:KA3VSP-7} Connected to BBS
241020 15:28:02 <KA3VSP ? ?[BPQ-6.0.24.1-B12FWIHJM$]
241020 15:28:02 <KA3VSP ? ?
241020 15:28:02 <KA3VSP ? ?de KA3VSP>
241020 15:28:02 >KA3VSP ? ?[BPQ-6.0.24.45-B1FIHJM$]
241020 15:28:02 >KA3VSP ? ?; MSGTYPES ?PR
241020 15:28:02 >KA3VSP ? ?FF
241020 15:28:04 <KA3VSP ? ?FQ
241020 15:28:04 |KA3VSP ? ?KA3VSP Disconnected
241020 15:29:22 |W7EES ? ? Connecting to BBS W7EES
241020 15:29:22 <W7EES ? ? *** CONNECTED
241020 15:29:22 >W7EES ? ? ATT 7
241020 15:29:22 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241020 15:29:22 >W7EES ? ? BW2300
241020 15:29:23 <W7EES ? ? VARA} OK
241020 15:29:23 >W7EES ? ? RADIO 14.1065 USB
241020 15:29:23 <W7EES ? ? Mode and Frequency Set OK
241020 15:29:23 >W7EES ? ? C W7EES
241020 15:29:24 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241020 15:29:31 |WA2UET-1 ?Incoming Connect from WA2UET
241020 15:29:31 >WA2UET-1 ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:29:31 >WA2UET-1 ?Hello Stan

241020 15:29:31 >WA2UET-1 ?de K5DAT BBS>

241020 15:29:33 <WA2UET-1 ?[BPQ-6.0.23.1-B1FIHJM$]
241020 15:29:33 <WA2UET-1 ?FF
241020 15:29:33 >WA2UET-1 ?FQ
241020 15:29:34 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241020 15:29:34 |W7EES ? ? W7EES Disconnected
241020 15:29:34 |WA2UET-1 ?WA2UET-1 Disconnected
241020 15:29:35 |W7EES ? ? Connecting to BBS W7EES
241020 15:29:35 <W7EES ? ? *** CONNECTED
241020 15:29:35 >W7EES ? ? D
241020 15:29:35 <W7EES ? ? SHAWNO:K5DAT-7} Invalid command - Enter ? for command list
241020 15:29:35 |W7EES ? ? W7EES Disconnected
241020 15:31:55 |GB7BED ? ?Incoming Connect from GB7BED
241020 15:31:55 >GB7BED ? ?[BPQ-6.0.24.45-B1FWIHJM$]
241020 15:31:55 >GB7BED ? ?Hello Hugh

241020 15:31:55 >GB7BED ? ?de K5DAT BBS>

241020 15:31:57 <GB7BED ? ?[BPQ-6.0.24.33-B1FIHJM$]
241020 15:31:57 <GB7BED ? ?FF
241020 15:31:57 >GB7BED ? ?FQ
241020 15:31:58 |GB7BED ? ?GB7BED Disconnected
241020 15:32:07 |N9LYA ? ? Connecting to BBS N9LYA
241020 15:32:07 <N9LYA ? ? *** CONNECTED
241020 15:32:07 ?N9LYA ? ? Script MSGTYPES PTBR
241020 15:32:07 >N9LYA ? ? ATT 7
241020 15:32:07 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use
241020 15:32:07 |N9LYA ? ? N9LYA Disconnected
241020 15:32:08 |N9LYA ? ? Connecting to BBS N9LYA
241020 15:32:08 <N9LYA ? ? *** CONNECTED
241020 15:32:08 ?N9LYA ? ? Script PAUSE 30
241020 15:32:38 <N9LYA ? ? Pause Ok
241020 15:32:38 ?N9LYA ? ? Script MSGTYPES PTBR
241020 15:32:38 >N9LYA ? ? ATT 7
241020 15:32:38 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use
241020 15:32:38 |N9LYA ? ? N9LYA Disconnected


73,
Lee K5DAT


On Sat, Oct 19, 2024 at 1:57?PM John G8BPQ via <john.wiseman=[email protected]> wrote:
This is rather odd. CLEANTXBUFFER should only be sent when a session times out and this is happening within a second of the connect attempt. I suppose it is possible that the CLEANTXBUFFER is from a previous session, but it is still odd. I'll see if I can work out what could be happening.

When this happens what does the TNC state show in the VARA driver window?

73,
John

On 19/10/2024 15:25, Lee Bengston wrote:
Greetings.

I've been finding the radio stuck on the same frequency lately. It's always the VARA port that is considered to be still in use.? It happened again this morning, and below is what's in the BBS log.? The radio is a Yaesu FTdx10.

241019 13:34:19 |N3MEL ? ? Connecting to BBS N3MEL
241019 13:34:19 <N3MEL ? ? *** CONNECTED
241019 13:34:19 ?N3MEL ? ? Script MSGTYPES PTBR
241019 13:34:19 >N3MEL ? ? ATT 7
241019 13:34:19 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241019 13:34:19 >N3MEL ? ? BW500
241019 13:34:20 <N3MEL ? ? VARA} OK
241019 13:34:20 >N3MEL ? ? RADIO 14.1065 USB
241019 13:34:20 <N3MEL ? ? Mode and Frequency Set OK
241019 13:34:20 >N3MEL ? ? C N3MEL-2
241019 13:34:21 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 13:35:06 <N3MEL ? ? VARA} Failure with K5DAT-1 N3MEL--
241019 13:35:06 |N3MEL ? ? N3MEL Disconnected

Subsequent attempts to forward via VARA fail because the port is not released.

241019 13:36:56 |N9LYA ? ? Connecting to BBS N9LYA
241019 13:36:56 <N9LYA ? ? *** CONNECTED
241019 13:36:56 ?N9LYA ? ? Script MSGTYPES PTBR
241019 13:36:56 >N9LYA ? ? ATT 7
241019 13:36:56 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use

241019 13:47:00 |K7EK ? ? ?Connecting to BBS K7EK
241019 13:47:00 <K7EK ? ? ?*** CONNECTED
241019 13:47:00 ?K7EK ? ? ?Script MSGTYPES PTBR
241019 13:47:00 >K7EK ? ? ?ATT 7
241019 13:47:00 <K7EK ? ? ?SHAWNO:K5DAT-7} Error - Port in use
241019 13:47:00 |K7EK ? ? ?K7EK Disconnected

Searching through the log for " CLEANTXBUFFER BUFFEREMPTY", found an older instance where the same thing happened.

241019 02:04:54 |W7EES ? ? Connecting to BBS W7EES
241019 02:04:54 <W7EES ? ? *** CONNECTED
241019 02:04:54 >W7EES ? ? ATT 7
241019 02:04:54 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241019 02:04:54 >W7EES ? ? BW2300
241019 02:04:55 <W7EES ? ? VARA} OK
241019 02:04:55 >W7EES ? ? RADIO 7.100 USB
241019 02:04:55 <W7EES ? ? Mode and Frequency Set OK
241019 02:04:55 >W7EES ? ? C W7EES
241019 02:04:56 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 02:05:06 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241019 02:05:06 |W7EES ? ? W7EES Disconnected

Sure enough, the next attempt to use VARA port 7 (14 minutes later) failed:

241019 02:19:19 |K1AJD ? ? Connecting to BBS K1AJD
241019 02:19:20 <K1AJD ? ? *** CONNECTED
241019 02:19:20 ?K1AJD ? ? Script MSGTYPES PTBR
241019 02:19:20 >K1AJD ? ? ATT 7
241019 02:19:20 <K1AJD ? ? SHAWNO:K5DAT-7} Error - Port in use
241019 02:19:20 |K1AJD ? ? K1AJD Disconnected

This looks like it's at least partially a VARA issue, but it seems BPQ should still de-attach the port.

73,
Lee K5DAT
Re: Fwd partners via QO-100

 

Hey Sergej,

I am interested but a total newby. What do I need (QO-100 station is ready to go)?

?? vy73 de Florian DF2ET




On 20 October 2024 21:20:53 CEST, "Dr. Sergey Ievkov" <doc.ievkov@...> wrote:
Hello, OMs!

I am temporarily left without a HF antenna (they walled up access to the roof), but I have assembled a simple kit for working via QO-100 and am looking for partners for sending mail and bulletins.

I can work in VARA SAT (preferably), but it is possible to use any mods from QtSM (I understand, IL2P BPSK)

Red PE1RRR (SK) shared information on his website (), I hear G7TAJ (he did not tell me, he wrote a letter). But who else is ready to continue creating a packet network on QO-100?
Any ideas and comments, I am open to experiments.

Sergey, RN1M

email: rn1m@...
pr-mail: RN1M@...
Fwd partners via QO-100

 

Hello, OMs!

I am temporarily left without a HF antenna (they walled up access to the roof), but I have assembled a simple kit for working via QO-100 and am looking for partners for sending mail and bulletins.

I can work in VARA SAT (preferably), but it is possible to use any mods from QtSM (I understand, IL2P BPSK)

Red PE1RRR (SK) shared information on his website (), I hear G7TAJ (he did not tell me, he wrote a letter). But who else is ready to continue creating a packet network on QO-100?
Any ideas and comments, I am open to experiments.

Sergey, RN1M

email: rn1m@...
pr-mail: RN1M@...
Re: Win BPQ32 and Uronode

 

What has already been said AND remove AUTOADDMAP as this enables any station to make a Map connection.?

It will be dropping off because it sees the node broadcast and gets added but when it tries to use it, it can be heard.?

73
Steve?



On Sat, 19 Oct 2024, 13:53 Keith G1GXB via , <g1gxb=[email protected]> wrote:
Hi All

Has anyone experience of connecting Windows BPQ32? ver V6.0.24.40 to Uronode using UDP

I am trying to get a BPQ32 Node G1GXB-3 to connect to Uronode GB7SOU.

BPQ32 Config

MHEARD ????? UDP 10091

?AUTOADDMAP

?BROADCAST NODES

MAP GB7SOU 192.168.0.75 UDP 10090 B

Uronode GB7SOU-1 Listens on UDP 10090

TX on route g1gxb-3 192.168.0.50 upd 10091 b

Neither sees the other but change both to UDP 10090 they work.

Trouble with this set up is GB7SOU-1 keeps dropping in and out of G1GXB-3 Node Table

regards Keith G1GXB
Re: VARA Error & Port stays attached

 

Thanks John. So far is has not happened again, but if/when it does, I'll check the TNC state.

73,
Lee K5DAT

On Sat, Oct 19, 2024 at 1:57?PM John G8BPQ via <john.wiseman=[email protected]> wrote:
This is rather odd. CLEANTXBUFFER should only be sent when a session times out and this is happening within a second of the connect attempt. I suppose it is possible that the CLEANTXBUFFER is from a previous session, but it is still odd. I'll see if I can work out what could be happening.

When this happens what does the TNC state show in the VARA driver window?

73,
John

On 19/10/2024 15:25, Lee Bengston wrote:
Greetings.

I've been finding the radio stuck on the same frequency lately. It's always the VARA port that is considered to be still in use.? It happened again this morning, and below is what's in the BBS log.? The radio is a Yaesu FTdx10.

241019 13:34:19 |N3MEL ? ? Connecting to BBS N3MEL
241019 13:34:19 <N3MEL ? ? *** CONNECTED
241019 13:34:19 ?N3MEL ? ? Script MSGTYPES PTBR
241019 13:34:19 >N3MEL ? ? ATT 7
241019 13:34:19 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241019 13:34:19 >N3MEL ? ? BW500
241019 13:34:20 <N3MEL ? ? VARA} OK
241019 13:34:20 >N3MEL ? ? RADIO 14.1065 USB
241019 13:34:20 <N3MEL ? ? Mode and Frequency Set OK
241019 13:34:20 >N3MEL ? ? C N3MEL-2
241019 13:34:21 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 13:35:06 <N3MEL ? ? VARA} Failure with K5DAT-1 N3MEL--
241019 13:35:06 |N3MEL ? ? N3MEL Disconnected

Subsequent attempts to forward via VARA fail because the port is not released.

241019 13:36:56 |N9LYA ? ? Connecting to BBS N9LYA
241019 13:36:56 <N9LYA ? ? *** CONNECTED
241019 13:36:56 ?N9LYA ? ? Script MSGTYPES PTBR
241019 13:36:56 >N9LYA ? ? ATT 7
241019 13:36:56 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use

241019 13:47:00 |K7EK ? ? ?Connecting to BBS K7EK
241019 13:47:00 <K7EK ? ? ?*** CONNECTED
241019 13:47:00 ?K7EK ? ? ?Script MSGTYPES PTBR
241019 13:47:00 >K7EK ? ? ?ATT 7
241019 13:47:00 <K7EK ? ? ?SHAWNO:K5DAT-7} Error - Port in use
241019 13:47:00 |K7EK ? ? ?K7EK Disconnected

Searching through the log for " CLEANTXBUFFER BUFFEREMPTY", found an older instance where the same thing happened.

241019 02:04:54 |W7EES ? ? Connecting to BBS W7EES
241019 02:04:54 <W7EES ? ? *** CONNECTED
241019 02:04:54 >W7EES ? ? ATT 7
241019 02:04:54 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241019 02:04:54 >W7EES ? ? BW2300
241019 02:04:55 <W7EES ? ? VARA} OK
241019 02:04:55 >W7EES ? ? RADIO 7.100 USB
241019 02:04:55 <W7EES ? ? Mode and Frequency Set OK
241019 02:04:55 >W7EES ? ? C W7EES
241019 02:04:56 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 02:05:06 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241019 02:05:06 |W7EES ? ? W7EES Disconnected

Sure enough, the next attempt to use VARA port 7 (14 minutes later) failed:

241019 02:19:19 |K1AJD ? ? Connecting to BBS K1AJD
241019 02:19:20 <K1AJD ? ? *** CONNECTED
241019 02:19:20 ?K1AJD ? ? Script MSGTYPES PTBR
241019 02:19:20 >K1AJD ? ? ATT 7
241019 02:19:20 <K1AJD ? ? SHAWNO:K5DAT-7} Error - Port in use
241019 02:19:20 |K1AJD ? ? K1AJD Disconnected

This looks like it's at least partially a VARA issue, but it seems BPQ should still de-attach the port.

73,
Lee K5DAT
Re: VARA Error & Port stays attached

 

¿ªÔÆÌåÓý

This is rather odd. CLEANTXBUFFER should only be sent when a session times out and this is happening within a second of the connect attempt. I suppose it is possible that the CLEANTXBUFFER is from a previous session, but it is still odd. I'll see if I can work out what could be happening.

When this happens what does the TNC state show in the VARA driver window?

73,
John

On 19/10/2024 15:25, Lee Bengston wrote:

Greetings.

I've been finding the radio stuck on the same frequency lately. It's always the VARA port that is considered to be still in use.? It happened again this morning, and below is what's in the BBS log.? The radio is a Yaesu FTdx10.

241019 13:34:19 |N3MEL ? ? Connecting to BBS N3MEL
241019 13:34:19 <N3MEL ? ? *** CONNECTED
241019 13:34:19 ?N3MEL ? ? Script MSGTYPES PTBR
241019 13:34:19 >N3MEL ? ? ATT 7
241019 13:34:19 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241019 13:34:19 >N3MEL ? ? BW500
241019 13:34:20 <N3MEL ? ? VARA} OK
241019 13:34:20 >N3MEL ? ? RADIO 14.1065 USB
241019 13:34:20 <N3MEL ? ? Mode and Frequency Set OK
241019 13:34:20 >N3MEL ? ? C N3MEL-2
241019 13:34:21 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 13:35:06 <N3MEL ? ? VARA} Failure with K5DAT-1 N3MEL--
241019 13:35:06 |N3MEL ? ? N3MEL Disconnected

Subsequent attempts to forward via VARA fail because the port is not released.

241019 13:36:56 |N9LYA ? ? Connecting to BBS N9LYA
241019 13:36:56 <N9LYA ? ? *** CONNECTED
241019 13:36:56 ?N9LYA ? ? Script MSGTYPES PTBR
241019 13:36:56 >N9LYA ? ? ATT 7
241019 13:36:56 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use

241019 13:47:00 |K7EK ? ? ?Connecting to BBS K7EK
241019 13:47:00 <K7EK ? ? ?*** CONNECTED
241019 13:47:00 ?K7EK ? ? ?Script MSGTYPES PTBR
241019 13:47:00 >K7EK ? ? ?ATT 7
241019 13:47:00 <K7EK ? ? ?SHAWNO:K5DAT-7} Error - Port in use
241019 13:47:00 |K7EK ? ? ?K7EK Disconnected

Searching through the log for " CLEANTXBUFFER BUFFEREMPTY", found an older instance where the same thing happened.

241019 02:04:54 |W7EES ? ? Connecting to BBS W7EES
241019 02:04:54 <W7EES ? ? *** CONNECTED
241019 02:04:54 >W7EES ? ? ATT 7
241019 02:04:54 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241019 02:04:54 >W7EES ? ? BW2300
241019 02:04:55 <W7EES ? ? VARA} OK
241019 02:04:55 >W7EES ? ? RADIO 7.100 USB
241019 02:04:55 <W7EES ? ? Mode and Frequency Set OK
241019 02:04:55 >W7EES ? ? C W7EES
241019 02:04:56 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 02:05:06 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241019 02:05:06 |W7EES ? ? W7EES Disconnected

Sure enough, the next attempt to use VARA port 7 (14 minutes later) failed:

241019 02:19:19 |K1AJD ? ? Connecting to BBS K1AJD
241019 02:19:20 <K1AJD ? ? *** CONNECTED
241019 02:19:20 ?K1AJD ? ? Script MSGTYPES PTBR
241019 02:19:20 >K1AJD ? ? ATT 7
241019 02:19:20 <K1AJD ? ? SHAWNO:K5DAT-7} Error - Port in use
241019 02:19:20 |K1AJD ? ? K1AJD Disconnected

This looks like it's at least partially a VARA issue, but it seems BPQ should still de-attach the port.

73,
Lee K5DAT
Re: VARA Error & Port stays attached

 

Actually, I have mine set before each ATTach line. That should work with else'd scripts.
Re: VARA Error & Port stays attached

 

Put IDLETIME 60 early in the script before your connect line.
Re: VARA Error & Port stays attached

 



On Sat, Oct 19, 2024 at 9:47?AM Mark Taylor via <mtaylor=[email protected]> wrote:
Try putting an else - disconnect in the script. (In the correct syntax, of course.)

Thanks Mark.? I think that will work in many cases.? There are cases, however, where there's already an
ELSE there in order to try AXUDP, for example, when VARA fails.

73,
Lee K5DAT
?
._,_._,_
Re: VARA Error & Port stays attached

 

Try putting an else - disconnect in the script. (In the correct syntax, of course.)
?
?
?
VARA Error & Port stays attached

 

Greetings.

I've been finding the radio stuck on the same frequency lately. It's always the VARA port that is considered to be still in use.? It happened again this morning, and below is what's in the BBS log.? The radio is a Yaesu FTdx10.

241019 13:34:19 |N3MEL ? ? Connecting to BBS N3MEL
241019 13:34:19 <N3MEL ? ? *** CONNECTED
241019 13:34:19 ?N3MEL ? ? Script MSGTYPES PTBR
241019 13:34:19 >N3MEL ? ? ATT 7
241019 13:34:19 <N3MEL ? ? SHAWNO:K5DAT-7} Ok
241019 13:34:19 >N3MEL ? ? BW500
241019 13:34:20 <N3MEL ? ? VARA} OK
241019 13:34:20 >N3MEL ? ? RADIO 14.1065 USB
241019 13:34:20 <N3MEL ? ? Mode and Frequency Set OK
241019 13:34:20 >N3MEL ? ? C N3MEL-2
241019 13:34:21 <N3MEL ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 13:35:06 <N3MEL ? ? VARA} Failure with K5DAT-1 N3MEL--
241019 13:35:06 |N3MEL ? ? N3MEL Disconnected

Subsequent attempts to forward via VARA fail because the port is not released.

241019 13:36:56 |N9LYA ? ? Connecting to BBS N9LYA
241019 13:36:56 <N9LYA ? ? *** CONNECTED
241019 13:36:56 ?N9LYA ? ? Script MSGTYPES PTBR
241019 13:36:56 >N9LYA ? ? ATT 7
241019 13:36:56 <N9LYA ? ? SHAWNO:K5DAT-7} Error - Port in use

241019 13:47:00 |K7EK ? ? ?Connecting to BBS K7EK
241019 13:47:00 <K7EK ? ? ?*** CONNECTED
241019 13:47:00 ?K7EK ? ? ?Script MSGTYPES PTBR
241019 13:47:00 >K7EK ? ? ?ATT 7
241019 13:47:00 <K7EK ? ? ?SHAWNO:K5DAT-7} Error - Port in use
241019 13:47:00 |K7EK ? ? ?K7EK Disconnected

Searching through the log for " CLEANTXBUFFER BUFFEREMPTY", found an older instance where the same thing happened.

241019 02:04:54 |W7EES ? ? Connecting to BBS W7EES
241019 02:04:54 <W7EES ? ? *** CONNECTED
241019 02:04:54 >W7EES ? ? ATT 7
241019 02:04:54 <W7EES ? ? SHAWNO:K5DAT-7} Ok
241019 02:04:54 >W7EES ? ? BW2300
241019 02:04:55 <W7EES ? ? VARA} OK
241019 02:04:55 >W7EES ? ? RADIO 7.100 USB
241019 02:04:55 <W7EES ? ? Mode and Frequency Set OK
241019 02:04:55 >W7EES ? ? C W7EES
241019 02:04:56 <W7EES ? ? VARA} CLEANTXBUFFER BUFFEREMPTY
241019 02:05:06 <W7EES ? ? Sorry, Can't Connect - Channel is busy
241019 02:05:06 |W7EES ? ? W7EES Disconnected

Sure enough, the next attempt to use VARA port 7 (14 minutes later) failed:

241019 02:19:19 |K1AJD ? ? Connecting to BBS K1AJD
241019 02:19:20 <K1AJD ? ? *** CONNECTED
241019 02:19:20 ?K1AJD ? ? Script MSGTYPES PTBR
241019 02:19:20 >K1AJD ? ? ATT 7
241019 02:19:20 <K1AJD ? ? SHAWNO:K5DAT-7} Error - Port in use
241019 02:19:20 |K1AJD ? ? K1AJD Disconnected

This looks like it's at least partially a VARA issue, but it seems BPQ should still de-attach the port.

73,
Lee K5DAT
Re: Win BPQ32 and Uronode

 

¿ªÔÆÌåÓý

Hi Keith,

Try MAP GB7SOU 192.168.0.75 UDP 10090 SOURCEPORT 10091 B

Ron VE3CGR


On 2024-10-19 8:53 a.m., Keith G1GXB via groups.io wrote:
MAP GB7SOU 192.168.0.75 UDP 10090 B


Virus-free.
Win BPQ32 and Uronode

 

Hi All

Has anyone experience of connecting Windows BPQ32? ver V6.0.24.40 to Uronode using UDP

I am trying to get a BPQ32 Node G1GXB-3 to connect to Uronode GB7SOU.

BPQ32 Config

MHEARD ????? UDP 10091

?AUTOADDMAP

?BROADCAST NODES

MAP GB7SOU 192.168.0.75 UDP 10090 B

Uronode GB7SOU-1 Listens on UDP 10090

TX on route g1gxb-3 192.168.0.50 upd 10091 b

Neither sees the other but change both to UDP 10090 they work.

Trouble with this set up is GB7SOU-1 keeps dropping in and out of G1GXB-3 Node Table

regards Keith G1GXB
1581 - 1600 of 43720