Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Bpq32
- Messages
Search
|
Re: pilinbpq 'missing libconfig.so.9'
The 15th Feb beta version is the latest. The version in the Downloads directory is a rebuild of the latest release 6.0.21.1 that I had accidentally deleted. But I built it from the published source that dynamically loads libconfig. I've rebuilt linked statically and re-uploaded.
toggle quoted message
Show quoted text
73, John On 19/02/2021 15:47, Jim WB9QPM via groups.io wrote:
Hi John, |
|
Re: pilinbpq 'missing libconfig.so.9'
Did an auto-update and mine failed as well. Is there another location to download from?
toggle quoted message
Show quoted text
Thanks, Jeff N9JXN -----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jim WB9QPM via groups.io Sent: Friday, February 19, 2021 9:47 AM To: [email protected] Subject: [bpq32] pilinbpq 'missing libconfig.so.9' Hi John, After downloading pilinbpq, dated 02-18-2021, it says it is looking for libconfig.so.9 and fails to start. The beta version dated the 15th of Feb is working fine. Just wondering if I downloaded the wrong file. Thanks, Jim |
|
Re: APRS-only port?
Set QUALITY=0 on the APRS port.
toggle quoted message
Show quoted text
You can't selectively disable ID frames, you can only turn off for the whole system (by setting IDINTERVAL=0). 73, John On 19/02/2021 11:52, Misko YT7MPB wrote:
Hello, |
|
APRS-only port?
Hello,
I want to 'advertise' a local VHF packet node & BBS (running on 144.875 MHz) by adding another VHF port on 144.800 MHz (APRS-only) where I just want it to send APRS beacons (GPS position) once per hour, as well as to receive local APRS traffic and plot it on the map. What I do not want is that new port sends nodes broadcast and node IDs, as those two add unnecessary traffic on the APRS channel. So how to stop the new port to behave as 'regular' node/bbs port? (I added to my config the port params from the APRS sample, and it does send GPS location to the map. But as I said, nodes broadcast and station ID are not wanted. Misko YT7MPB |
|
Re: Strugging to get COMPORT to work
开云体育Hi All
Got myself very confused there (not hard) got my 2 configuration swapped
over trying different port description. Amazing how you can miss little thing
looking at problems, typo on my behalf missed the forward stroke. Now working
fine, Thanks for all your helps.
?
73 de Keith G1GXB
?
? From: John G8BPQ
Sent: Thursday, February 18, 2021 3:28 PM
Subject: Re: [bpq32] Strugging to get COMPORT to
work ?
That
is a bit weird. Assuming you want to use the USB serial port it should be
COMPORT=/dev/ttyUSB0, but if it says it is trying to open ttyAMA0 then maybe you
are looking at the wrong bpq32.cfg. Try this? COMPORT=/dev/ttyUSB073, John Ken, W9GM ? |
|
Re: Strugging to get COMPORT to work
开云体育That is a bit weird. Assuming you want to use the USB serial port it should be COMPORT=/dev/ttyUSB0, but if it says it is trying to open ttyAMA0 then maybe you are looking at the wrong bpq32.cfg.73, John On 18/02/2021 14:51, Keith G1GXB via
groups.io wrote:
Hi All |
|
Re: Strugging to get COMPORT to work
开云体育Hi Keith,Try this? COMPORT=/dev/ttyUSB0 Ken, W9GM On 2/18/2021 8:51 AM, Keith G1GXB via
groups.io wrote:
Hi All |
|
Strugging to get COMPORT to work
Hi All
Can anyone see my mistake,???dmesg | grep tty produces :-[ ? ? 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1? smsc95xx.macaddr=DC:A6:32:88:20:1C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000? console=ttyS0,115200 console=tty1 root=PARTUUID=2482dcd1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [? ? 0.001073] printk: console [tty1] enabled
[? ? 1.151882] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[? ? 1.158091] printk: console [ttyS0] disabled
[? ? 1.158165] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 31, base_baud = 62500000) is a 16550
[? ? 1.158226] printk: console [ttyS0] enabled
[? ? 3.182855] systemd[1]: Created slice system-serial\x2dgetty.slice.
[? ? 5.832858] usb 1-1.4: pl2303 converter now attached to ttyUSB0
My port configuration PORT PORTNUM=5 ?ID=144.950 MHz User Port ?TYPE=ASYNC ?PROTOCOL=KISS ?SPEED=9600 ?COMPORT=ttyUSB0 ?CHANNEL=A ?QUALITY=192 ?MAXFRAME=2 ?FRACK=7000 ?RESPTIME=1500 ?RETRIES=10 ?PACLEN=128 ?TXDELAY=500 ?SLOTTIME=100 ?PERSIST=64 ENDPORT Com Open Failed: No such file or directory
Initialising Port 05? ? ?ASYNC ttyAMA0 Chan A? ttyAMA0 could not be opened
What am I missing regards Keith G1GXB ?
? |
|
Re: Disconnect not recognized
开云体育Could you send me the BBS log showing the failed connect attempt?Also it might be worth trying the latest Beta version of BPQMail.exe. Thanks, John On 17/02/2021 16:40, Jim KY2D wrote:
|
|
Re: No Line Feeds after Carriage Returns
Codematic Chris
Ahh the eternal battle of what exactly is the End Of Line.?? With windows putty make sure he applied the setting to the current session or save it to the session and disconnect / reconnect. If all else fails create a new saved session from defaults and add the settings. I've often had this discussion with "younger" folks and they are convinced it's broken because it's 2 commands CR LF.. its not until I explain how a typewriter works that they see the light...? Chris On Wed, Feb 17, 2021, 14:45 Richard Hendricks - KE0GB <rickh6155@...> wrote: We recently installed pilinbpq on a friend's Raspberry Pi, |
|
Re: New bpq32 install connection refused
开云体育Ctrl/C closes linbpq. Closing the window doesn't.73, John On 17/02/2021 22:56, Carmine Prestia
wrote:
John: |
|
Re: New bpq32 install connection refused
Carmine Prestia
John:
toggle quoted message
Show quoted text
On Wed, Feb 17, 2021 at 04:29 PM, John G8BPQ wrote: You have two (or more) copies of linbpq running. Make sure you kill all copies before restarting (killall linbpq and wait a few seconds for it to close)Ok.? Does closing the terminal window close the application?? Or likewise, does ^C stop the application when it closes the terminal window? Thanks Carmine, K3CWP |
|
Re: No Line Feeds after Carriage Returns
开云体育I don't think my last comment was correct. Connects to TCPPORT should send CRLF, connects to FBBPORT only CR.73, John On 17/02/2021 20:45, Richard Hendricks
- KE0GB wrote:
We recently installed pilinbpq on a friend's Raspberry Pi, |
|
Re: No Line Feeds after Carriage Returns
开云体育The packet standard is to end lines with CR.?? I'm surprised that setting "Implicit Line Feed in every C/R" in Putty doesn't work, but generally it is better to use one of the versions of BPQTermTCP rather than a normal telnet client.73, John On 17/02/2021 20:45, Richard Hendricks
- KE0GB wrote:
We recently installed pilinbpq on a friend's Raspberry Pi, |
|
Re: New bpq32 install connection refused
开云体育You have two (or more) copies of linbpq running. Make sure you kill all copies before restarting (killall linbpq and wait a few seconds for it to close)73, John On 17/02/2021 19:03, Carmine Prestia
wrote:
John: |
|
Re: New bpq32 install connection refused
Carmine Prestia
John:
That looks better! Indeed, and I can get to it from the Pi or one of my other computers. However another error has turned up: G8BPQ AX25 Packet Switch System Version 6.0.21.24 February 2021
Copyright ? 2001-2021 John Wiseman G8BPQ
Current Directory is /home/pi/linbpq
?
Configuration file Preprocessor.
Using Configuration file /home/pi/linbpq/bpq32.cfg
Conversion (probably) successful
?
PORTS 0x21f9c8 LINKS 0x222410 DESTS 0x225310 ROUTES 0x22b8a0 L4 0x22d2a0 BUFFERS 0x233768
?
Initialising Port 01? ? ?TCPKISS IP 127.0.0.1 Port 8001 Chan A?
Initialising Port 02? ? ?Telnet Server bind(sock) failed port 8010 Error 98
bind(sock) failed port 8011 Error 98
bind(sock) failed port 8008 Error 98
?
Initialising Port 03? ? ?AXIP?
Bind Failed for UDP socket 10093 - error code = 98Starting Mail
Config File is /home/pi/linbpq/linmail.cfg
Config Processed
Mail Started
slave device: /dev/pts/8. symlink to /home/pi/BPQ/com10 created
TNC Emulator Init Complete
The red is my highlighting. ?
You may be able to find what Direwolf is complaining about by turning on KISS Network debugging by adding -d n to the direwolf command line.I did that but it did not seem to return any information.?? Carmine, K3CWP |
|
Re: Disconnect not recognized
开云体育It’s Pactor on HF ?using an SCS PTC-IIusb. The connect script has ATT 4, RADIO to set freq and mode, the C to call, then ELSE, PAUSE 5, and another attach, radio, and call command set. Poor propagation recently has resulted in more dropped connections after successfully connecting to the other station. But, I don’t remember having the “already connected” messages so frequently in the past. ? TNX 73 Jim KY2D ? ? From: [email protected] <[email protected]> On Behalf Of John G8BPQ
Sent: Wednesday, February 17, 2021 13:08 To: [email protected] Subject: Re: [bpq32] Disconnect not recognized ? What type of port is this? On 17/02/2021 16:40, Jim KY2D wrote:
? |
|
Re: Disconnect not recognized
toggle quoted message
Show quoted text
|
to navigate to use esc to dismiss