44.135.101.1 is the IPGateway on VE3KPG running BPQ32
44.135.101.2 is VA3HIP running PiLinBPQ
I am unable to ping 44.135.101.2 as well. In fact, I cannot ping any addresses other than 44.135.101.1, but NAT and IPR does seem to be working.
nat
PETERB:VE3KPG-2}?
44.135.101.2 to 192.168.1.9
44.135.101.1 to 192.168.1.10
?
ping 44.135.101.1
PETERB:VE3KPG-2}?
OK
Ping Response from 44.135.101.1
?
ping 44.135.101.2
PETERB:VE3KPG-2}?
OK
?
ping 44.131.56.2
PETERB:VE3KPG-2}?
OK
?
ping 44.92.35.1
PETERB:VE3KPG-2}?
OK
?
ipr
PETERB:VE3KPG-2} 765 Entries
44.0.0.0/9 0 T 0 0 encap 169.228.34.84
44.0.0.1/32 0 T 1 3355 encap 169.228.34.84
44.2.0.2/32 0 T 1 3355 encap 98.20.210.138..........etc..
This is what I have for my IPGateway on VE3KPG;
IPGATEWAY
Adapter \Device\NPF_{EA2D9183-0C8D-4AB0-BD03-AEA6D347354B}? ? ? ? ; See Below Description
44ENCAP 192.168.1.250? ? ? ? ? ? ? ? ? ? ? ; This is a Un-used but inside of routers DHCP (Must be added to routers DMZ)
IPAddr 44.135.101.1? ? ? ? ? ? ? ? ? ? ? ? ? ? ?; Your 44 AMPR IP
IPNetMask 255.255.255.248? ? ? ? ? ? ? ? ; The 248 (last 3) depends on how many IP addresses you have, mine is 8 IP¡¯S
IPPorts 1? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?; Port Numbers to be used, 2 is my AXIP 3 My Telnet port
NAT 44.135.101.2 192.168.1.9? ? ? ? ? ? ?;VA3HIP running PiLinBPQ
ROUTE 44.0.0.0/9 169.228.34.84 T? ? ?; This Line and following line is needed to access the AMPR Portal Web Site
ROUTE 44.128.0.0/10 169.228.34.84 T
**** ; End of Config
This what is setup on VA3HIP;
IPGATEWAY
IPAddr 44.135.101.2? ? ? ? ? ? ? ? ? ? ? ? ?; VA3HIP
IPNetMask 255.255.255.248? ? ? ? ? ? ; The 248 (last 3) depends on how many IP addresses you have, mine is 8 IP¡¯S
IPPorts 1? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; Port Numbers to be used, 2 is my AXIP 3 My Telnet port
**** ; End of Config
Should I be able to ping any IP address including 44 AMPRNet?
