At the moment I can ping 44.135.101.1 over the
IPIP tunnel, but not 44.135.101.2. What is 44.135.101.1?
LinBPQ will add a NAT entry from 44.135.101.2 to the IP address of
the machine running LinBPQ.
To allow access from 44 net? to other machines on the same network
you need to allocate another address in your 44.35.1.101 range to
each and add NAT lines. For example I have
?NAT 44.131.56.2 192.168.1.35
?NAT 44.131.56.4 192.168.1.64
?NAT 44.131.56.5 192.168.1.118
?NAT 44.131.56.6 192.168.1.254
My IPADDR is 44.131.56.7 and the linbpq pi is 192.168.1.44, so I end
up with
nat
POGO4:G8BPQ-9}
44.131.56.2 to 192.168.1.35
44.131.56.4 to 192.168.1.64
44.131.56.5 to 192.168.1.118
44.131.56.6 to 192.168.1.254
44.131.56.7 to 192.168.1.44 via TAP
ping 44.131.56.4
POGO4:G8BPQ-9}
OK
Ping Response from 44.131.56.4
73,
John
On 01/07/2022 22:47, Harmen Minnema
wrote:
toggle quoted message
Show quoted text
Will? adding the NAT 44.135.101.2? 192.168.9
line into IP Gateway settings on my BPQ32 system allow outside
connections to a PiLinBPQ system on the same network?
Also added the following to IPGatway Settings in PiLinBPQ system;
IPAddr 44.135.101.2
IPNetmast 255.255.255.248
IPPorts 1
If so, are there IP Gateway settings required for the PiLinBPQ
system?? Haven't been able to get it to work....
Thanks,
Harmen VE3EMA
