Just an update;
I now have QTsoundmodem working on PILINBPQ with USB Signalink.
Thank you to John G8BPQ and Lee K5DAT
Thank you gentlemen; it works very well.
Brett
KB5YZB
On 6/5/2022 10:57 PM, John G8BPQ wrote:
toggle quoted message
Show quoted text
A normal UZ7HO port definition is
PORT
?ID=UZ7HO
?DRIVER=UZ7HO
?CHANNEL=A
?INTERLOCK=4
?PACLEN=100
?CONFIG
? ADDR 127.0.0.1 8000
? MAXSESSIONS=5
? UPDATEMAP
ENDPORT
How are you running UZ7HO Soundmodem on a Pi? Or are you running
my QtSoundModem?
If you are running Soundmodem on a separate Windows machine, the
ADDR line should have the IP address of the Windows machine in
place of 127.0.0.1
Make sure that the AGWPE interface is enabled in the Soundmodem
Devices menu, with the same port number as in the ADDR line.
73,
John
On 05/06/2022 23:16, Brett Williams
wrote:
UZ7HO. But I'm not sold only to that as it is the only one I
used....
Brett
On 6/5/2022 3:13 PM, John G8BPQ
wrote:
Which modem are you trying to use with the Signallink?
73,
John
On 05/06/2022 17:10, Brett
Williams wrote:
Group, is anyone using a Signal Link USB with a PILINBPQ
setup? I have tried some pre-made port configs, non seemed
to work.?
Thanks for the help..
Brett
KB5YZB
