I would like to run everything on pi, So I would to try your QT Southmodem. What is config for your QT Soudmodem on the pi?

Installing you QTSoundModem; I will follow your website institutions; if I run problem I will let you know.....

On 6/5/2022 10:57 PM, John G8BPQ wrote:

A normal UZ7HO port definition is

PORT
?ID=UZ7HO
?DRIVER=UZ7HO
?CHANNEL=A
?INTERLOCK=4
?PACLEN=100
?CONFIG
? ADDR 127.0.0.1 8000
? MAXSESSIONS=5
? UPDATEMAP

ENDPORT

How are you running UZ7HO Soundmodem on a Pi? Or are you running my QtSoundModem?

If you are running Soundmodem on a separate Windows machine, the ADDR line should have the IP address of the Windows machine in place of 127.0.0.1

Make sure that the AGWPE interface is enabled in the Soundmodem Devices menu, with the same port number as in the ADDR line.

73,
John

On 05/06/2022 23:16, Brett Williams wrote:

UZ7HO. But I'm not sold only to that as it is the only one I used....

Brett

On 6/5/2022 3:13 PM, John G8BPQ wrote:

Which modem are you trying to use with the Signallink?

73,
John

On 05/06/2022 17:10, Brett Williams wrote:

Group, is anyone using a Signal Link USB with a PILINBPQ setup? I have tried some pre-made port configs, non seemed to work.?

Thanks for the help..

Brett
KB5YZB