开云体育

Attached are a 3 documents that confirm Robert's point regarding Atlas lathes and other machine equipment's limited accessibility. Individuals or companies had to apply through the "War Production

Animal,?It is similar to a carriage bolt.? The square portion at the head fits into the banjo slot and keeps the bolt from rotating.? The flange of the bold keeps it from sliding thru the slot of

OK, I’ll grant you that but my point was that the Atlas lathes were primarily advertised to or for small shops, not hobbyists. And any that were involved in the War effort certainly were not

I'm not sure how the banjo is set up on a Craftsman but can't ya use a standard bolt & just grind down the head til it fits in the depression/slot on the banjo? ??? ??? animal

Hi Jody , There are a couple of factors to take into account when cutting stainless . . Not nice stuff to practice with :>( ! Take care , Carvel Sent: 28 January 2019 08:12 PM To:

Robert, I think it is all coming out of the front dust cover.? Which makes sense because the riding bearing surface is angled towards the chuck so you would expect it to follow the bearing and

Jon, The oil is that really lightweight thin oil that several recommended on here for the Timkem bearings. ? As far as "immediately"....I mean immediately.? I can't fill the cup up because it runs

My feed rate gearing is set at 0.0035" and I comfirmed that last night.? I was turning some stainless with a carbide index cutter and the finish was awful.? As a novice I'm still learning my metals

Guys, please keep your medical advice off the list. People are free to take or avoid medical treatment, as they please. Consequences go with those choices; live or die, get better or not. The only

Now the other side of the Levaquin coin. I took it as prescribed for 3 days, got up during the night to go to the bathroom, didn't get 1 step and slid into the floor ripping a toenail off OUCH. My

It is 023653. Don

Probably, but that doesn’t necessarily mean that it does the same out of a 10” or early 12”. However, although no one has ever commented on this, I can’t see how it wouldn’t. There are two

Yes, I did this, as the Babbit bearings in my first Atlas 10" F-series lathe were REALLY badly worn oval. You could take shims out, but you couldn't get rid of the oval issue. Oil would run out of the

Yes! I just wanted to comment that the warnings on the antibiotics may be scary, but the flouroqinolone group of antibiotics (Cipro and Levaquin are some of the top ones) are TRULY wonder drugs. I had

Well, what weight oil, and exactly how fast is "immediately"? This would be in indication of badly worn bearings in a Babbit bearing lathe. But, the Timken bearings are exactly supposed to do this.

Or you could do as I did and buy a Timken headstock, thick way, QC lathe from the Git-Go! The advantage postulated for a conversion to thinwall bearings was the larger spindle bore! Bill in Boulder CO

Robert, based on the number of articles in Popular Mechanics from the 30's and early 40's there would have been some number of hobbyists using lathes in that period. During WWII there was a government

Or make your own . . . . My first Atlas lathe was a well used 10D , and the shop it came from had had phosphor bronze bearing shells made for it , and it was surprisingly accurate . . . . served me

There is a photo of the Atlas factory line boring setup in the Copyright 1937 MOLO’s. Robert Downs Sent: Saturday, January 26, 2019 20:55 To: [email protected] Subject: Re: [atlas-craftsman

Most lawnmower engines don’t. Robert Downs Sent: Saturday, January 26, 2019 15:43 To: [email protected] Subject: Re: [atlas-craftsman IO] Welcome to [email protected] Automotive and