Re: atlas 10" quick change tool post
|
I put an AXA clone on my TH42 some years ago. Works well.
Got mine from Amazon for $130, but they've gone up in price since then. By quite a bit.?
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Monday, October 21, 2024 at 02:00:07 AM CDT, <hedgesben@...> wrote:
hi all, The lathe i have came with a home made tool post that holds 4 toolbits at once. however to change between the 4 bits you have to turn the tool post round and some how get it back square i presume (im a complete newbie).? there are 4 allen head bolts holding the tool bit in so i assume i would have to undo those and reset everything up if i wanted a different bit. ?
?
All this to say what quick change toolpost with the dovetail holders would work and is it worth spending a couple of hundred pounds?? ?
?
many thanks
Ben
|
Bill in OKC too