开云体育

Check out the excel spread sheet for the AH-4 long wire antenna lengths in the file section of the group point, the

Aha, so basically I hit smack in the midst of the next "bad" point, 277ft (84.4m) to 283ft (86.25m) - my landlord is advertising for rent the place adjoining mine, and he's already given the ok for

Hi folks, after moving to FINLAND where its very cold now, I put up a longwire loop of approx 84 metres of wire. Its fed with 300-ohms radioshack line. The tuner WON'T tune this on the lower bands

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the YaesuTuner group. File : /AH-4 Graphical Wire Length Calculator 2.2.xls

WOW ! That's great..... Bob Lancon <N5DMT@...> wrote: Kyle, The 5 turns did the trick and it is tuning great now, thanks for your help! N5DMT Bob the base of the antenna. the antenna. night

Kyle, The 5 turns did the trick and it is tuning great now, thanks for your help! N5DMT Bob the base of the antenna. the antenna. night and noticed that it does tune from 7.050 to 7.200 but

Bob, You could try two things: 1. Put about five turns of coax about 5 inches in diameter at the base of the antenna. 2. Put a few turns ( 10 X 1" ) of #14 gage wire at the base of the

Kyle, thanks for the response. I did play with it a little last night and noticed that it does tune from 7.050 to 7.200 but any higher will produce high SWR.... I will try adding the Ground to the

The Ham Stick has inductance. Add a few turns of coil at the base of the antenna. OR improve the bumper to chassis ground. or Both. Make sure the tuner is close to the base of the antenna.

Just installed the Ft-857D, FC-40, Hustler bumper strap mount and 102" SS Whip in my truck. It works on all bands but 40 meters (high SWR) I have tried extra lenght of coax added to the supplied coax.

If you can get the tuner grounded to a metal water pipe or try the AC ground. My tuner is grounded with a 2 foot length of wire to one ground rod and then to the AC ground rod a few feet from

Since the 25 is manual, I think the antenna has to be adjusted to the portion of the band you wish to work. I don't think your idea is very efficient. I use a 102 inch whip with all band tuning.

try running a few 1/4 wave radials for each band from the ground side how long is you wire? 40. I meters. meter RF Any of

Any suggestions for removing RF on the control cable for the FC-40. I was unable to get the tuner to tune a long wire except for 80 meters. I installed dipoles for 40 through 15 meters. When I use

Hi folks, I'm new round here I use an FT 897d and have recently come by an atas-25 (the manual version of an atas 120) I was wondering about feeding the atas-25 via the fc40 to avoid the manual

I am using both the LDG "AT-897" and my FC-40 with three antennas and a control switch. Is anyone else doing the same? The control cable for the AT-897 is connected to the back of my FT- 897D in the

Try not to spend so much money. Read the postings for the extension cable for $7.00 US dollars. --------------------------------- Yahoo! Shopping Find Great Deals on Holiday Gifts at Yahoo!

Please see my eHam review of the FC-40 under Product Reviews/Antenna Tuners. I reported that the control cable can be extended quite a bit: "Since I wired my shack with the control cable that

In GU we don't pay VAT and it's still 14.62 USD! PS and average house price 525000 usd! Must go, I hear violins playing in the background! ;-) Mike GU4EON