Re: USB OK, LSB narrow/pinched TX audio
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 10:51
To: [email protected]
Subject: Re: [YaesuFT847] USB OK, LSB narrow/pinched TX audio? I just checked UHF and it sounds good on USB and terrible on LSB just like on HF.? Vic?
On Monday, March 14, 2022, 6:21 AM, vstockma@... <vstockma@...> wrote: FB = fine business.? I have not verified, but since it uses the same IF track, I assumed it was the same.? Vic
On Monday, March 14, 2022, 5:48 AM, Andrew Lenton <a@...> wrote: Hi, ? What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? ? 73 ? Andrew ? ? ? From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 03:55
To: [email protected]
Subject: [YaesuFT847] USB OK, LSB narrow/pinched TX audio ? Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
Re: USB OK, LSB narrow/pinched TX audio
OK The SSB part and FM Path are completely different, There are two PLL’s for upper and low side band, I suspect you LSB PLL is off frequency or out of lock, they both go off to the Balanced modulator: ? The technical supplement will tell you how to check it ? 73 ? Andrew ? 
? 
?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 10:51
To: [email protected]
Subject: Re: [YaesuFT847] USB OK, LSB narrow/pinched TX audio? I just checked UHF and it sounds good on USB and terrible on LSB just like on HF.? Vic?
On Monday, March 14, 2022, 6:21 AM, vstockma@... <vstockma@...> wrote: FB = fine business.? I have not verified, but since it uses the same IF track, I assumed it was the same.? Vic
On Monday, March 14, 2022, 5:48 AM, Andrew Lenton <a@...> wrote: Hi, ? What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? ? 73 ? Andrew ? ? ? From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 03:55
To: [email protected]
Subject: [YaesuFT847] USB OK, LSB narrow/pinched TX audio ? Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
Re: USB OK, LSB narrow/pinched TX audio
I just checked UHF and it sounds good on USB and terrible on LSB just like on HF.?
On Monday, March 14, 2022, 6:21 AM, vstockma@... <vstockma@...> wrote:
FB = fine business.? I have not verified, but since it uses the same IF track, I assumed it was the same.?
Vic On Monday, March 14, 2022, 5:48 AM, Andrew Lenton <a@...> wrote: Hi, ? What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? ? 73 ? Andrew ? ? ? From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 03:55
To: [email protected]
Subject: [YaesuFT847] USB OK, LSB narrow/pinched TX audio ? Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
Re: USB OK, LSB narrow/pinched TX audio
FB = fine business.? I have not verified, but since it uses the same IF track, I assumed it was the same.?
On Monday, March 14, 2022, 5:48 AM, Andrew Lenton <a@...> wrote: Hi, ? What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? ? 73 ? Andrew ? ? ? From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 03:55
To: [email protected]
Subject: [YaesuFT847] USB OK, LSB narrow/pinched TX audio ? Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
Re: USB OK, LSB narrow/pinched TX audio
Hi, ? What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? ? 73 ? Andrew ? ? ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of vstockma@...
Sent: 14 March 2022 03:55
To: [email protected]
Subject: [YaesuFT847] USB OK, LSB narrow/pinched TX audio ? Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
USB OK, LSB narrow/pinched TX audio
Good evening!
I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters) it sounds terrible.?
I have tried to see how to validate the carrier frequency for LSB, but not finding a setting or trimmer that affects the frequency in any way on either sideband.
Any suggestions?
Thanks
Victor
|
Re: FT-847 CAT Control Problem
|
Re: FT-847 CAT Control Problem
Hi, this is crackers because all Gmail account are blocking my email and Microsoft are holding it. I will provide a OneDrive link to the file (probably should have done that first off!!
De Spence M0STO? Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 8 Mar 2022, at 18:49, Russ N4MAV < n4mav1@...> wrote: Spence, please send the file to me and I will upload to the files section in the .
?
73
Russ Abbey, N4MAV
Owner Yaesu FT-847
|
Re: FT-847 CAT Control Problem
No problem, remember its for the PSTRotator software but should at least give some bidirectional activity and eliminate cable ot software issues.
De Spence M0STO
On Tue, Mar 8, 2022 at 6:49 PM Russ N4MAV < n4mav1@...> wrote: Spence, please send the file to me and I will upload to the files section in the .
?
73
Russ Abbey, N4MAV
Owner Yaesu FT-847 开云体育
|
Re: FT-847 CAT Control Problem
Spence, please send the file to me and I will upload to the files section in the groups.io.
n4mav1@...
?
73
Russ Abbey, N4MAV
Owner Yaesu FT-847 开云体育
|
Re: FT-847 CAT Control Problem
Still nothing. Have you tried putting in in the files area in the group?
?
toggle quoted message
Show quoted text
On 2022-03-08 01:25 PM, Spence M0STO via groups.io wrote:
I did! Let me try again and check your junk email as it's got a zip attachment but scanned by Avast as checked and good
Sent while portable! please excuse typos.
On 8 Mar 2022, at 18:22, Micky Corrow via < opus@...> wrote:
Send it to my home email direct not the the group
opus@...
?
On 2022-03-08 01:10 PM, Spence M0STO via wrote:
Hi Mick, the group won't allow attachments so sent it from another account? Have you received it?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 18:07, Micky Corrow via < opus@...> wrote:
Attach the .zip?
?
On 2022-03-08 01:05 PM, Spence M0STO via wrote:
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
?
?
Hope it helps?
?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
I did! Let me try again and check your junk email as it’s got a zip attachment but scanned by Avast as checked and good Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 8 Mar 2022, at 18:22, Micky Corrow via < opus@...> wrote:
Send it to my home email direct not the the group
opus@...
?
On 2022-03-08 01:10 PM, Spence M0STO via wrote:
Hi Mick, the group won't allow attachments so sent it from another account? Have you received it?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 18:07, Micky Corrow via < opus@...> wrote:
Attach the .zip?
?
On 2022-03-08 01:05 PM, Spence M0STO via wrote:
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
?
?
Hope it helps?
?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Send it to my home email direct not the the group
opus@...
?
toggle quoted message
Show quoted text
On 2022-03-08 01:10 PM, Spence M0STO via groups.io wrote:
Hi Mick, the group won't allow attachments so sent it from another account? Have you received it?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 18:07, Micky Corrow via < opus@...> wrote:
Attach the .zip?
?
On 2022-03-08 01:05 PM, Spence M0STO via wrote:
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
?
?
Hope it helps?
?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Hi Mick, the group won’t allow attachments so sent it from another account? Have you received it? Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 8 Mar 2022, at 18:07, Micky Corrow via < opus@...> wrote:
Attach the .zip?
?
On 2022-03-08 01:05 PM, Spence M0STO via wrote:
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
?
?
Hope it helps?
?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
toggle quoted message
Show quoted text
On 2022-03-08 01:05 PM, Spence M0STO via groups.io wrote:
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
?
?
Hope it helps?
?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup?it works incredibly?well at forcing?COM2 and COM4 pots
Hope it helps?
de Spence M0STO
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Run this zip. Then copy the Folder with the .ini files in it to the OmniRig folder and then select the PST version of FT847.... eg: FT847 or FT847PST. This version was modded for better Bi-Directional comms with PSTRotator as the display failed to change with the standard version.
Please let me know if it helps.
De Spence M0STO
Thanks Spence, I would love to try a different approach to this problem other than the cable/comm/driver changes I have been struggling with.
Micky K1XH
?
On 2022-03-08 12:48 PM, Spence M0STO via wrote:
Hi Mick, I use PSTRotator and Omni Rig (special Yaesu FT847 .ini file revision).
? When I change band or mode then Omni rig picks up on the change.
?
?Let me send a version of OmniRig that I know works with this .ini and then please let me know if you get some kind of results.
?
De Spence M0STO?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 17:02, Micky Corrow via < opus@...> wrote:
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Thanks Spence, I would love to try a different approach to this problem other than the cable/comm/driver changes I have been struggling with.
Micky K1XH
?
toggle quoted message
Show quoted text
On 2022-03-08 12:48 PM, Spence M0STO via groups.io wrote:
Hi Mick, I use PSTRotator and Omni Rig (special Yaesu FT847 .ini file revision).
? When I change band or mode then Omni rig picks up on the change.
?
?Let me send a version of OmniRig that I know works with this .ini and then please let me know if you get some kind of results.
?
De Spence M0STO?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 17:02, Micky Corrow via < opus@...> wrote:
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Re: FT-847 CAT Control Problem
Hi Mick, I use PSTRotator and Omni Rig (special Yaesu FT847 .ini file revision). ? When I change band or mode then Omni rig picks up on the change.
?Let me send a version of OmniRig that I know works with this .ini and then please let me know if you get some kind of results.
De Spence M0STO? Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 8 Mar 2022, at 17:02, Micky Corrow via < opus@...> wrote: Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
FT-847 CAT Control Problem
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Andrew Lenton
Spence G5STO