Re: FT-847 CAT Control Problem
|
Run this zip. Then copy the Folder with the .ini files in it to the OmniRig folder and then select the PST version of FT847.... eg: FT847 or FT847PST. This version was modded for better Bi-Directional comms with PSTRotator as the display failed to change with the standard version.
Please let me know if it helps.
De Spence M0STO
Thanks Spence, I would love to try a different approach to this problem other than the cable/comm/driver changes I have been struggling with.
Micky K1XH
?
On 2022-03-08 12:48 PM, Spence M0STO via wrote:
Hi Mick, I use PSTRotator and Omni Rig (special Yaesu FT847 .ini file revision).
? When I change band or mode then Omni rig picks up on the change.
?
?Let me send a version of OmniRig that I know works with this .ini and then please let me know if you get some kind of results.
?
De Spence M0STO?
Sent while portable! please excuse typos.
On 8 Mar 2022, at 17:02, Micky Corrow via < opus@...> wrote:
Greetings All
While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem.
My rig is from 1990, serial 0M45xxxx so it shouldn't have any difficulties. I tried a CPU reset with no change.
I can get the FT847UNI drivers working in JTDX, but not the Bi-Directional driver.
While this might be the bare minimum necessary for digital operation, I would like to get the OmniRig drivers working so that I can get my logging program (Log4OMv2) working alongside another app to follow the freq.
I know there is a HamLib option in Log4OM, but I can't get that to work (it is native in JTDX) so I am wondering...
Is there anyone who has their 847 working with bi-directional CAT control? If so, what cables are you using with what software?
Micky K1XH
|
Spence G5STO