开云体育

You need a precision tri-wing screwdriver set https://cpc.farnell.com/pro-s-kit/sd-081g/screwdriver-set-tri-wing-4pc/dp/TL14532 John Earnshaw M0JFE aka Beanpole or 26TM915 Tel:- 07940815659 “Ride

Hello Group: Does anyone know what type of screw on the outside of the fnb-58li or fnb-80li battery is called??? What type of tool can be used to open the battery case? I recently obtained a

I bought an FT-60R and was disappointed to find that it doesn't meet its spec for coverage in the 900 MHz band.? Tuning upwards, it skips 918.5-943.5 MHz.? I can't access these frequencies from the

I have a VX-8R and without looking at my manual, I believe that indicates that APRS is set to 1200 baud. DA1VF Floyd

Was the “A12” indicator always flashing? If not, what should I look for? aprs.fi shows functioning NFM mode selected

I found the answer, the wires was active. AAAAgh ________________________________ Sent: Tuesday, April 13, 2021 12:00 AM To: [email protected] <[email protected]> Subject:

new to the VX-7, does anyone know why my radio?Beeps immediately after pushing the PTT. it doesn't seem to matter what channel i am on or if the channel. is busy or free. It beeps every time i

I've already tried both of these & neither helped. Thanks Ken WN7CSI ________________________________ Sent: Tuesday, February 9, 2021 5:08 AM To: [email protected]

I would try one or both of the suggestions here.? Just sounds to me like the thing has hung up.? Good luck and let us know if either of these

My VX-5 has suddenly gotten stuck on 144.000 MR channel 1. The squelch stays open even if I set it to 15. Turning the dial knob doesn't do anything. I can push the (MR(SKP)SC) key and it will change

You would be better off using an SDR (like the RTL-SDR) and appropriate software if you want to scan trunked systems. Start at www.rtl-sdr.com and work from there. You'll find all the info you

No you can not scan trunked systems. At best the VX7r is closer to an analog scanner of the 1980's. It will scan the channles you put in, at a relative slow rate. However, in many areas, such as where

I am interested in using it as a scanner, as well. Is it possible to monitor trunked systems in the 800 range? No idea how to program for a trunked system. Nora

Have you tried a factory reset? My VX-8R was not allowing me to make any changes to menu items. A reset fixed it. I used RT Systems software to do a full backup first then restored the data

Nice to see this list spring back to life. I was using my VX-7R in my car as a scanner, and it was often hanging on odd channels.? I stopped using it because of that. I wonder if there is still a

All correct. My original version didn't even work on Win10, so had to buy new. Then again, my version was XP variant. Was surprised they updated it. WD8DUP/DA1VF kf6nfw@...> wrote:

I just opened my software and did an update, it looks like we are at Version 5.0.??? now Sincerely, Mr. Chris A. Robinson KF6NFW / WQOQ661

I have the newest software, and it does work just fine on win10.

Nora, My version is 5.00.05. Not sure if that is the latest. I upgraded in 2018. You might have to pay for the latest. I have used it with Windows 10. Bruce wd9ghk Sent: Friday, January 15,

I contacted them directly and they sold me an updated version at a lower price than new, also for a VX-7R. As long as you have the original serial number it's practically no issue. WD8DUP/DA1VF