开云体育

Yes sir. I had the opportunity to look at the radio last evening. Single VFO memory mode.No alpha tags. Single VFO MG mode.No alpha tags. Going the set up menu:I can see the channels and alpha

To view tag you need to be in single vfo mem mode by using the main n sub buttons to select single vfo hold one of them in for a few seconds. Also check when in v/m memory mode menu “Basic setup

It is really a great little radio. I guess I just got busy and it went into storage.I know it worked previously.I am thinking it is how I am calling up the memory station but have not resolved it

I am following this. i have the RT systems sw for this, and believe this is mostly resolved there, but I dont recall, its been a while since I picked this radio up as well. maybe its time to

Hello All: I just joined the group.? I see it is not very active. I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I

I'm very sorry about your father being a silent key, Michael.

I have ill probably sell ... my wife uses it from time to time ... Has gps module in microphone and I think a headset ... It was my dad's bought new ... he is SK now.

Does anyone know if Yaesu plans to reintroduce the VX-8DR?? I understand new VX-6R radios are available new from time to time.? I owned a VX-8DR and would like to find another one either new or used

Easiest test for the speaker would be to use the VX-7 to listen to the FM broadcast band (88 to 108 Mhz). The FM broadcast band uses a different filter than narrow band Ham FM. Sent: Thursday,

Thanks Roger Another ham has diagnsed the same problemas probably the filter, maybe the speaker Gordon VE3JSJ

*Hi Gordon, If it works OK on wide FM (88 to 108 Mhz) it is likely the filter sold as eBay item* 171828786666. The Kenwood TS-2000 has a similar problem with the original filters failing. 73 Roger

It has been several years since I used my VX-7R, and when I turned it on the AUDIO was very "thin" (no bass component) compared to my VX-8R and VX-2R handhelds. Is this a feature of the VX-7R, or is

I only found ONE place to turn BT on, it this it?? See image :POWR: ON in the BT Menu. OK, so it worked with your hearing aid, meaning that it works with third party BT devices, that's very

More... I even had it working, receive only, with my hearing aids Bluetooth adapter.

Probably a dumb question, so apologize, but did you turn on the Bluetooth in the vx8r's menu??

Hello folks, Has anyone in this group installed the BU-1 or BU-2 BlueTooth module and gotten it to work? Then does anyone have it working with a generic BT earpiece or headset, such as a Plantronics

power on off button worn out- disasembled- not carbon like earlier yaesu hts- silver coating on the back of power button almost gone. tested resistance across button- very spoty and iffy. clean board

My VX-8DR will not power up after a failed program upload. I added some frequencies and during the upload there evidently was some issue, no error on the radio and the software said the upload was

Whenever you make a change you have to save it, usually by clicking the transmit button. I have recently been retraining myself on my old VX7 and it took a while to relearn this. And sometimes

Hi, I have my dad's vx7r ( now sk ) that sounds off frequency... its 144 deviation is set to 110. Iv tried turning it down to 90 but it seems that after a power back on the value is still on 110. V/M