开云体育

I am glad to read, that it worked for you! 73, Chris

I finally got around to adjusting the PLL reference frequency today. I used my SDR and while transmitting, just turned the reference frequency up until it lined up with the desired frequency. Now both

Hi Ryan, If yor TX frequency is off, then the PLL reference frequency needs adjustment. It is normal, that a frequency error is about three times higher on 70cm than on 2m. If you record the

Hi Chris, Is it the PLL reference frequency that needs to be adjusted? Are you able to tell me what the actual function of that is and what I should be looking for when adjusting? I don't have a

Could try a factory reset. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

The reference frequency can be adjusted in the service menu. For details, check the service manual (technical supplement). Write down the current setting, so you can revert to the original setting, in

For ham radio frequencies, the radio should be set for wide. Public safety and commercial freqs are narrow. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

Hello, I have noticed that my FT-60 transmit audio is a bit distorted/clipping when transmitting on 70cm. I have tested this with recording the receive audio on my Anytone 878, UV5R and UBCD436

Try E-Bay ?I picked one up for Ten bucks And it works

I've never purchased the cheaper models, but it's been my experience that cheap is usually worth what you pay for it. Generally, I've found cheaper things of poor workmanship that don't last as long

To all that replied to my query, Thank you. I guess I just missed the online Yaesu FBA-25 info. I further noticed there are several much cheaper copies available online by that model number. I don't

I show a YAESU FBA-25 battery case on the HRO site, for $18.95, and available at all HRO stores. It's suitable for the FT-60R, plus some other Yaesu ratios Ben -- Ben Coleman

https://www.hamradio.com/detail.cfm?pid=H0-002659 -- Clint Bradford K6LCS http//www.work-sat.com

Yaesu FBA-25A MW / N4MEW [email protected]> wrote:

Ray: I think I have a couple, I'll check when I get home and let you know. Regards: B. Clive Souter N6TTD/Amateur Extra Class ________________________________ Sent: Monday, June 17, 2024 9:14

Looking for an "AA" standard battery holder (not a rechargeable pak) for my FT-60R, if one is available. Did an online? search and did not find one. Thought I would ask here on the list. Your

Hello Petr, Go to the Panasonic Eneloop website here: https://www.panasonic.com/global/energy/products/eneloop/en/lineup/eneloop.html The Pro is more expensive than the standard version. HTH...Bob

Hi folks, haha …more and deep search and study is replying all my questions… 3 - AA cell HCD - 5th generation E - EU distribution All details are described

Bob, it is not as simple as it seems at first glance with Panasonic Enelop cells. There are different p/n codes on the market available like BK-3HCBE, BK-3HCCE or BK-3HCDE even BK-3HCDE/4BE and

Hello Arthur, Definitely a faulty battery. As others have said, you can pick up a replacement FNB-83 from your favourite Yaesu reseller or from most of the online sellers, Ebay, etc. But remember,