Re: Instantly check frequency of a alphanumeric memory?
开云体育Thanks much. ?I was reading the mail , ?so to speak, ?and wondered myself as I have a pair of 60s with a lot of the memories named as well.?Dave J. AF0DJ -------- Original message -------- From: "'John Murphy' jmurphy7411@... [FT-60]" <FT-60@...> Date: 04/03/2016 10:03 (GMT-07:00) To: FT-60@... Subject: RE: [FT-60] Instantly check frequency of a alphanumeric memory? The feature exist, when you have a channel that is in NAME more, for example on my radio, I have a named channel called CRA460.? If you press the BAND button (lower right, next to the F/W button), it changes to the frequency, in my example, it now shows 145.460.? You will notice that it goes into tuning mode, not to worry, it goes back to member mode when you press the BAND button again. ? Hope this helps. ? ? de KC?JPO/AFA8JP/AFF8CO "When all else fails...Amateur Radio" PIO Adams County (CO) ARES State MARS Director, Colorado ARES/RACES/AFMARS Nothwest Area, Region 8 Personal Email: jmurphy7411@... ? ? ? From: FT-60@... [mailto:FT-60@...] ? ? Hello, ? On my Yaesy VX-6 when in memory mode, when I press the Moni button , squelch opens and at the same time the memory name changes to the frequency of that memory. So if you have a stored memory with an Alphanumeric name but you don't remember the frequency of it you can see it instantly with a momentary press on the Moni button. ? Is there a way to do this on a FT-60 ? I had a look at the manual and tried various key combinations of buttons but couldn't find something. ? Thank you ? No virus found in this message. |
Dave Jeffries AF0DJ