|
Re: FT-101ZD Brochure?
Alistair That size of file will be too big to attach to a post and it will be too big to attach to a direct email as well. If you can do a file share and send the link to the OP,?that would be a successfully way.? 73 Don ve3ids On Fri., Nov. 26, 2021, 2:39 a.m. Alistair GM4ENF via , <alistairfyffe=[email protected]> wrote: I don't know much about the details behind scanning but I scanned the brochure page at 2400dpi with my Epson V750 scanner.? The original scan was over 1G which I reduced to around 30M before uploading it - Maybe the 'system' resizes images to prevent swamping (which would be understandable). I use the V750 to scan medium format transparencies, some for publication, and know that at 2400dpi the scanner is looking for detail not there on the originals!? If you are still interested maybe direct emailing might give you what you are looking for.? Alistair GM4ENF |
|
Re: FT-101ZD Brochure?
I don't know much about the details behind scanning but I scanned the brochure page at 2400dpi with my Epson V750 scanner.? The original scan was over 1G which I reduced to around 30M before uploading it - Maybe the 'system' resizes images to prevent swamping (which would be understandable). I use the V750 to scan medium format transparencies, some for publication, and know that at 2400dpi the scanner is looking for detail not there on the originals!? If you are still interested maybe direct emailing might give you what you are looking for.? Alistair GM4ENF
|
|
Re: FT-101ZD Brochure?
The attachment above is of a really low resolution and size, so not sure if you have uploaded it somewhere else, I am after at least 600+ dpi or a file size per page of around 4-12Mb.
I am bidding a few from The USA on FleaBay, will cost a small fortune to get them sent here but at least I will be able to scan these. James |
|
Re: FT-101ZD Brochure?
The scan I have taken from the cover of the FT101ZD brochure is very large so hope it will load up here.? After approaching 41 years I have just realised the brochure I was given is for a version without WARC bands - despite my Set being WARC fitted.? If this is any good to you I will scan the rest of the brochure - but probably as smaller files.? Let me know.
Alistair GM4ENF |
|
Re: FT-101ZD Brochure?
开云体育I have an original from when I purchased my 101Z forty years ago.? In
reasonable condition so should scan ok.? How high a resolution scan do you
want?
?
Alistair GM4ENF
? From: James Sawle (MD0MDI)
Sent: Monday, November 22, 2021 12:09 PM
Subject: [Yaesu-FT-101] FT-101ZD Brochure? ?
Hi
Guys, Does anyone have a High Res Scan of the FT-101ZD Brochure at all, been trying to locate one but all I can find are Low Res versions. Kind Regards James MD0MDI |
|
Re: WTB
What price range are?you looking for? On Mon, Nov 15, 2021 at 11:08 AM Dave M via <damclaugh_=[email protected]> wrote: ?I’m looking for a FT-101ZD MKIII in good condition.?Dave W0ZY |
|
Re: FW: [Yaesu-FT-101] Deaf FT101Z
Ah... here we have a? sticking point - I do not have an oscilloscope and only a fairly basic home made RF probe for my digital meter.? Although I understand the various circuit diagrams and the function of the components - and have repaired lots of old <thermionic tube> gear in the past - I don't think I would know what I was looking for here - that is unless my RF probe and Digital meter will show increase or absence of a signal.? I haver just made an extender board for the PB2154 so I can see what I might be doing(!) and will? see what I can do over the next day or so.
|
Alistair GM4ENF
Don VE3IDS
James Sawle (MD0MDI)
Bruce Collins
