开云体育

Is this what you mean? My FT101b has no raised lettering either. I thought this was normal. 73, Tom ai4th

Okay, here's a couple of pics of a FT-101FX dial bezel. I tried to capture the non-embossed nature of the lettering. Jim

Hi All, The issue I had with the original RL1 relay in my FT-101 is that the meter circuit was not working due to the relay.? I had cleaned it a few times bit did not correct the problem but it made

Hi Roberto, I found Jackson ball drive replacements here for my Heathkit HW-101 here. ?They should have one that can be used in your radio.

Thank you, Jim, much appreciated and helpful. If you can follow-up with the photo, that would be great! I'd like to see that they match. 73, Randy K7RAN

Not an "authoritive" answer, but I have seen 2 FT-101F's in person (I owned one, but it was a parts radio - having been completely abused and destroyed internally by CB usage - fried the HV

I never heard a response to this... thought I'd check back a few years later to resurrect the question. :) 73, Randy K7RAN

Whoops, I realised that I didn't actually confirm; my radio is now working as it should.? Thank-you Giuliano.

Thanks for your response Giuliano. What I did was open the case and give the jack and mode switch a good spray with contact cleaner and work it back and forth.? It appears I may have had the same

Lance, I got exactly same issue. It turned out a oxideized contact on a mode switch section , cured with contact cleaner. Of note, you need also to turn on the heather switch? which has a dedicated

Yes.. I think if you look at the characteristics of this wire, it might work.. https://www.tme.com/us/en-us/details/scw-0.35_100/silver-plated-wires/bq-cable/

Hi guys, I need one of the face bezels for a ft-101b, Mine is broken. Here is a picture of what I need The crack is on the left side of the squiggly line Thanks Kevin Rea K6REA

Good afternoon group. I am still becoming familiar with a new-to-me FT-101E.? I am a regular CW operator of both new and old hybrid Kenwoods, so understand the basic principles of CW operation. My

I found it on amazon.com Here it is: I think the 18 gauge is the one.

You mean this one?

Hi Kevin, I would like to know too! If I had to guess, it would be nichrome resistance wire which is non-magnetic, but that is my guess.? Hopefully someone in the group that is familiar with R12

Hello, Anyone have any idea where I might find one of these resistors or the wire to rewrap the existing one? It looks like it is a fabric encased possibly copper wire that is originally on there,

Two new 6883B/8032A tubes coming my way.? Thanks again Jacques, 73 -- Gord. VE5UJ

Hello, I have to replace the 6:1 Ball Drive in my Yaesu FT-101E , produced by Mainline Electronics Ltd. Does anyone know the exact model? and code for this replacement? Many thanks, 73 de ?IU1AHB,

I will check into the tubes, Jacques, thank you.? If the relay has to be changed, rewiring the socket will be much easier to do than with the older 101s.. finding a socket that will fit the opening