开云体育

power supply, crystal filter, manuals and more For Sale: . Yaesu Crystal Filters: I have a variety of crystal filters available that fit Yaesu rigs. All of these filters work 100% like they should, and look great also. . The following filters are for the 8.2 MHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. Yaesu XF-8.2M-251-01, 250 Hz CW filter for the 8.215 MHz IF. $75 Yaesu XF-8.2M-202-01, 2000 Hz SSB filter for the 8.215 MHz IF. $75 . The following filters are for the 455 KHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. As a general statement, the filters for the 455 KHz IF are sharper, with steeper skirts. XF-455K-501-01 500 Hz wide for CW $115 . Yaesu FP-707, 20 Amp Speaker/Power Supply: The Yaesu FP-707 is a 20 amp 13.8 Volt DC Power Supply, with a very nice front facing speaker in the same enclosure. Cosmetically, it matches the FT-707, FT-747, FT-757 and likely others. Electrically, it can provide up to 20 amps, so will work with most any HF and/or VHF rig. It also has a set of binding posts on the back for easy connection of a rig in addition to the HF rig. The speaker has a 3.5 mm plug on it. This particular unit is in very good shape both electrically and cosmetically. I can not find a scratch, dent, or ding on it. Electrically, it works as it should. Buy this unit with manual for $120. . Yaesu NC-9 B Charger 13 V DC at 45 ma, 2.5 mm plug; $12 . Original Yaesu Manuals: These are the manuals only. All are originals, and not copies. Most are in close to new condition. FNB-9,10,11,12 Battery packs, $2 FC-757AT Antenna Tuner, $10 FT-100 HF/VHF Transceiver, $18 FT-470 Dual Band HT, $10 FT-757 GX, HF Transceiver, $18 FT-720 R, 2 meter mobile, $8 FT-1802 M, 2 meter mobile, $12 FT-2700 Dual Band Xcvr, $12 FTH-2005 HT, $5 FTS-8 tone squelch unit, $3 FTS-12 tone squelch unit, $3 MH-1B A2B speaker microphone, $2 SP-101 P, Speaker / Phone patch, $5 VX-1 dual band HT, $10 Maintenance Service Manual for Yaesu FT-208 R 2 meter HT. Looks new. $25 Technical Supplement for Yaesu FT-2700 Dual Band Mobile. Looks new. $20 These are original Yaesu operating manuals only, in very nice condition. . I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors, miscellaneous accessories, etc. Just too many to list here. Please e-mail your requests. . Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to W8EK@... or W8EK@... Voice Phone (352) 732-8400 .

I have a few extra items that came with a Yaesu FT450D I recently purchased. Love the rig, just don't need these extras: 1. a set of side rails with handles for the FT450 series of radios. These are the rails that attach to the side of the radio using the mobile mounting bracket holes and provide handles in the front for carrying and protection. I have no need for them as the radio is being used in my shack, not portable. They appear to have been 3D printed, but they could be commercially made. I am asking $16 shipped 2. The original box with inserts for a Yaesu FT450D which will also fit the FT450AT. Great shape, good way to store your FT450 or to send it in for updates or ship to a buyer. I will wrap it in heavy paper for shipping so it doesn't get any labels or marks on it. I am asking $28 shipped. 3.I also have the original operators manual for the Yaesu FT450D. There are a few pencil notes in if that could be removed if wanted. These are only in a few places and don't look objectionable, and you might even find them useful.I am asking $11 shipped by media mail. Feel free to make an offer on one or all also! I can take paypal/check/MO/Cashapp. 73 John AF5CC

I have a 7250 and am having problem connecting to Fusion. I press P3 on mike fore WiresX and it does not connect to repeater, I have been on before, so I dO not know if I changed anything. Jim W9JWN

I have for sale a Yaesu FT890 HF radio that is a parts or fix up unit. Case is in decent condition with some scratches on it. It has no optional filters installed, and comes with the radio only, no mic or power cord. Here are the issues with it: 1. Receives on FM mode ok, no receive on other modes-maybe a damaged ceramic SSB filter, as I am guessing that all modes but FM pass through it. That is just a guess, though. I could hear some FT8 stations when in FM mode so it is receiving there. 2. Putting out around 1 to 2 watts max. The meter shows full output, but an external meter only shows a couple of watts. I could hear its carrier on another receiver. 3. SWR meter shows a high SWR even though the antenna has a low SWR, might be related to #4 4. It has the internal antenna tuner installed but it doesn't seem to work. Couldn't find a match after a minute or so. The display is fine, all buttons seem to work fine, VFO dial spins freely. It could have other issues I have not been able to find. It is being sold as-is, not working correctly. I am asking $175 shipped and can take paypal/check/MO. 73 John AF5CC

I am helping a local ham close out his station and have a decent sized set of HF and VHF radio manuals. These are all the original operating manuals, not copies. Asking $10 each shipped by media mail and I can take paypal/check/MO. - Here are the manuals I have available: Yaesu FT5100 2m/70cm radio Yaesu FT8000 VHF/UHF radio Yaesu FT100 HF/VHF/UHF radio Yaesu FT2200 2 meter Yaesu FT680 6 meter all mode radio Yaesu FT780 70cm all mode radio 73 John AF5CC

I need the 3178.5 Khz USB/CW carrier crystal for my FTdx-560. I think the FT-101 used the same rock. Thanks.

I'm getting a new FT-991A soon, and will want to hook up a phone patch. Any suggestions on the best way to do that? Thanks... Rick WA1RKT Londonderry, NH Catch me on 14.300 MHz Intercon / MMSN most days

Has anyone experienced lockup on their FRG-8800, in which the receiver won't tune. My display appears to be fine. I am attempting a complete power off to see if the receiver resets. Thanks..

Hi all, I've decided to sell my beloved pair of 9000s. I wanted to give the Yaesu owners first chance to purchase them. #1 FTDX-9000D - pastel blue LEDs. 10/10 cosmetic and function. Factory box. SP-9000 also 10/10 included. PEP Upgrade. #2 FTDX-9000 (fully upgraded Contest, for all intents and purposes a full D) 10/10 cosmetic and function. PEP Upgrade. Factory box has all the D options checked except internal TFT screen & 160 u-tune unit. I purchased and installed the 160 u-tune unit, works perfectly and all u-tune units are now there. Instead of the TFT, it has the extra meters and function knobs where the TFT normally goes (just like the MP 400W model). Umber (amber) display. SP-9000 also 10/10 included. Since the Contest does not have an internal monitor, I am including a 12" Eyoyo external monitor (driven by the DMU-9000). Included with each will be a Signalink USB data/digital sound card box configured for the 9000 ($100+ value). Also available for sale is an OM-2000A+ set up and cabled for the 9000s (I have an auto-switch network to select whichever rig is on). 160m-6m, EU model with low drive (no attenuator like the USA model has). Serious buyers contact me offlist at ab2e@.... Great chance to pick up a spare 9000, or upgrade to one, those of you who are on the 5000 list. See my QRZ.com page for a picture of the complete station (right half of desk, OM Power amp sitting on black table to right of desk). Willing to drive to meet. Really want to avoid shipping for obvious reasons. Will drive to meet a reasonable distance, or demo and pickup at my QTH in southern NJ (25 min due East of HRO Delaware, 10 min from Gloucester Co ARC Hamfest site in Mullica Hill). Asking $5500 for each package, 73 Darrell AB2E Cell: 856-304-3323 (text your call and name first, too many spam/scam calls these days!) Virus-free.www.avg.com

For reasons unknown. my G-2800 only rotates CCW at Slow Speed and has no speed control in that direction. It works normally in the CW direction. It has been up since 2018 (bought new) turning a 4 El Steppir (6-20M) beam w/o a problem. I am hoping the problem is in the controller and can be fixed w/o having to take down the beam to get the rotator out. Does anyone have a chart of the voltages that come from the standard Yaesu G-2800DXA controller? Thanks, Alan K9MBQ

I'm trying to figure out how to adjust the audio level when sending CW and monitoring my sending. Any ideas out there? I don't see anything relating to this in the Manual.

HF Transceiver, HF plus 6 m plus 2 m plus 440 MHz transceiver, power supply, crystal filter, manuals and more For Sale: . Yaesu FT-1000 Deluxe 200 Watt HF Transceiver: The Yaesu FT-1000 was designed for optimum performance and operability. The FT-1000 project involves a wholly new approach to the application of the latest digital and RF technologies to today's most demanding HF bands. This is a 200 watt transceiver, with an internal 120 V AC power supply. Six microprocessors and five Direct Digital Synthesizers. Receiver covers 100 kHz to 30 MHz. Features: Adjustable power up to 200 watts Five Direct Digital Synthesizers QRM Rejection Systems 100 Memories Optimized Digital Communications Modes Simultaneous Dual (Unlimited) Frequency Reception Flexible Mode and IF Filter Automatic Antenna Tuner with 39 memories Special Features for CW Operation It works as it should, and looks extremely nice. Buy it with operating manual and service manual on CD, for $975 plus shipping from Florida. This is a very heavy rig (over 50 pounds, before packing). Pickup up near Ocala is much preferred. . Yaesu FT-847 HF+++ Transceiver For Sale: The Yaesu FT-847 changes base operation forever. Now you get three radios in one -- HF, VHF/UHF and satellite. You get 100 watt output on HF and 6 Meters, plus 50 watts on both 2 Meters and 430 MHz bands. Additional features include: Cross-band Full Duplex operation, Normal/Reverse Tracking, CTCSS/DCS Encode and Decode, 0.1 Hz tuning steps, DSP Notch, DSP NR and DSP BPF, Shuttle Jog Tuning Dial, Carry Handle and Keypad Entry. The FT-847 is also 1200/9600 bps Packet ready. 10.2 x 3.4 x 10.6 inches. Features: HF/VHF/UHF DSP Filters Dual Watch 0.1 Hz Tuning CTCSS/DCS Decode and Encoode Cross-band Full Duplex 1200/9600 Packet Ready It covers all of the normal ham bands in one package with virtually all modes! This one works 100% and looks like new. No scratches or defects. - In original box, with paper work for $750 Yaesu Crystal Filters: I have a variety of crystal filters available that fit Yaesu rigs. All of these filters work 100% like they should, and look great also. . The following filters are for the 8.2 MHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. Yaesu XF-8.2M-251-01, 250 Hz CW filter for the 8.215 MHz IF. $75 Yaesu XF-8.2M-202-01, 2000 Hz SSB filter for the 8.215 MHz IF. $75 . The following filters are for the 455 KHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. As a general statement, the filters for the 455 KHz IF are sharper, with steeper skirts. XF-455K-501-01 500 Hz wide for CW $115 . Yaesu FP-707, 20 Amp Speaker/Power Supply: The Yaesu FP-707 is a 20 amp 13.8 Volt DC Power Supply, with a very nice front facing speaker in the same enclosure. Cosmetically, it matches the FT-707, FT-747, FT-757 and likely others. Electrically, it can provide up to 20 amps, so will work with most any HF and/or VHF rig. It also has a set of binding posts on the back for easy connection of a rig in addition to the HF rig. The speaker has a 3.5 mm plug on it. This particular unit is in very good shape both electrically and cosmetically. I can not find a scratch, dent, or ding on it. Electrically, it works as it should. Buy this unit with manual for $120. . Yaesu NC-9 B Charger 13 V DC at 45 ma, 2.5 mm plug; $12 . Original Yaesu Manuals: These are the manuals only. All are originals, and not copies. Most are in close to new condition. FNB-9,10,11,12 Battery packs, $2 FC-757AT Antenna Tuner, $10 FT-100 HF/VHF Transceiver, $18 FT-470 Dual Band HT, $10 FT-757 GX, HF Transceiver, $18 FT-720 R, 2 meter mobile, $8 FT-1802 M, 2 meter mobile, $12 FT-2700 Dual Band Xcvr, $12 FTH-2005 HT, $5 FTS-8 tone squelch unit, $3 FTS-12 tone squelch unit, $3 MH-1B A2B speaker microphone, $2 SP-101 P, Speaker / Phone patch, $5 VX-1 dual band HT, $10 Maintenance Service Manual for Yaesu FT-208 R 2 meter HT. Looks new. $25 Technical Supplement for Yaesu F

Today I picked up an ft - 690R II Its complete rig but I'll have to buy some new batteries for it and a charger. I'd love to find a working amplifier for that model but nothing shows up on eBay. I was able to put together an AC adapter for it and power it on it seems to be working okay but I haven't done any kind of calibration checks for it. If anyone has any experience with this model I appreciate any and all input. 73!

Dual Band HT, HF Transceiver, Filters, Power Supply, Manuals, and more For Sale: . Yaesu FT-470 Dual Band HT: The innovative Yaesu FT-470 2M/440 HT has many sophisticated features, built into a robustly built chassis with easy-to-use external controls. It boasts four VFOs and 42 memories plus an impressive backlit dual band LCD. Power output can be as high at 5 watts depending on battery pack used. It has a very "tight" front end on the receiver, keeping a lot of intermod out. Features: 42 Memories 4 VFOs DTMF Keypad DTMF Auto Dialer Scanning Backlit Keypad CTCSS Encode Auto Repeater Shift Auto Power Off This particular unit works 100% and looks extremely nice. It has an aftermarket FNB-12, 12 volt 700 mahr battery pack. Also included is the dual band rubber duck antenna, wrist strap, wall charger, and paper work for $100 . Yaesu FT-890/AT HF Transceiver: - The Yaesu FT-890 is an advanced HF transceiver covering 160 to 10 meters. The general coverage receiver tunes from 100 kHz to 30 MHz. Power output is 100 watts in CW, SSB, FM and 25 watts AM. The FT-890 features IF Shift, IF Notch and 16-bit main CPU. It requires 13.8 VDC at 20 Amps. - This one includes the optional automatic antenna tuner inside. - Features: 160-10 meters Electronic Keyer If Notch IF Shift Dual VFOs Noise Blanker 100 Watts Output Break-in CW Attenuator Speech Compressor VOX - This one works like it should. From the box, it appears that it was back to Yaesu, and has not been used since. - Cosmetically, it looks like new, with no scratches or defects. - Buy it in its original box, with power cord, antenna tuner, and manual, for $550 . Yaesu Crystal Filters: I have a variety of crystal filters available that fit Yaesu rigs. All of these filters work 100% like they should, and look great also. . The following filters are for the 8.2 MHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. Yaesu XF-8.2M-251-01, 250 Hz CW filter for the 8.215 MHz IF. $75 Yaesu XF-8.2M-202-01, 2000 Hz SSB filter for the 8.215 MHz IF. $75 . The following filters are for the 455 KHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. As a general statement, the filters for the 455 KHz IF are sharper, with steeper skirts. XF-455K-501-01 500 Hz wide for CW $115 . Yaesu FP-707, 20 Amp Speaker/Power Supply: The Yaesu FP-707 is a 20 amp 13.8 Volt DC Power Supply, with a very nice front facing speaker in the same enclosure. Cosmetically, it matches the FT-707, FT-747, FT-757 and likely others. Electrically, it can provide up to 20 amps, so will work with most any HF and/or VHF rig. It also has a set of binding posts on the back for easy connection of a rig in addition to the HF rig. The speaker has a 3.5 mm plug on it. This particular unit is in very good shape both electrically and cosmetically. I can not find a scratch, dent, or ding on it. Electrically, it works as it should. Buy this unit with manual for $120. . Yaesu NC-9 B Charger 13 V DC at 45 ma, 2.5 mm plug; $12 . Original Yaesu Manuals: These are the manuals only. All are originals, and not copies. Most are in close to new condition. FNB-9,10,11,12 Battery packs, $2 FC-757AT Antenna Tuner, $10 FT-100 HF/VHF Transceiver, $18 FT-470 Dual Band HT, $10 FT-757 GX, HF Transceiver, $18 FT-720 R, 2 meter mobile, $8 FT-1802 M, 2 meter mobile, $12 FT-2700 Dual Band Xcvr, $12 FTH-2005 HT, $5 FTS-8 tone squelch unit, $3 FTS-12 tone squelch unit, $3 MH-1B A2B speaker microphone, $2 SP-101 P, Speaker / Phone patch, $5 VX-1 dual band HT, $10 Maintenance Service Manual for Yaesu FT-208 R 2 meter HT. Looks new. $25 Technical Supplement for Yaesu FT-2700 Dual Band Mobile. Looks new. $20 These are original Yaesu operating manuals only, in very nice condition. . I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors, miscellaneous accessories, etc. Just too many to list here. Please

Hi, I have a yaesu ft-747gx that works great, but the frequency readout is off by about 7khz on AM and SSb. I recently replaced the détented tuning knob, which was frequency jumping, with an optical encoder. Radio works great and frequency jumping is gone. I believe the readout was off before I made the mod. Anyway, My question is, what part of a radios alignment procedure will bring the readout back to spec? Im guessing it’s the PLL alignment adjustment, but I’m not sure. There arent any dedicated groups for the ft-747gx/heath sb-1400 that exist, so I figured this is the next best place. Thanks in advance, John

HI - use the FT-857 since long time for all Modes - no problems. Now last IARU 6m Contest would switch to CW for QSO. But the keyer does'nt work anymore. Left paddle - dots Right - nothing when I change to REVERSE Left paddle - dash Right - nothing MICKEY - up/dn - dot/dash works. ELEKEY - up/dn - works normal Has anybody an idea ? TNX Erich

I was looking for something else but saw this: https://www.aliexpress.us/item/3256807074956396.html It's an external S-Meter for certain Yaesu radios for under $10 with free shipping. I can't vouch for the quality but even if the accuracy is off, it might be useful for a relative strength S-Meter. It only lists a few Yaesu radios but I would think any that have the same port that this plugs into might work with it, and if not, you're only out less than $10. You could sell it on your ARRL section swap site or take it with you to a hamfest if you're selling these. I've seen almost an identical S-Meter for these radios selling for many times more than this price, so I have to wonder if the vendor of that one bought these here? I was hoping to find one for Icom radios or my 767 GX but I really don't need one for the 767, just my Icom 705, 7300, or 7100. Please--no China bashing. I'm not of Chinese descent, and don't like what's happening in the SE Asian area, but this isn't a group were we allow political discussions. CHina is capable of making some very high quality items for a moderate price, and some low quality items at a very low price, of course. I'm typing this on a Lenovo ThinkPad laptop, one of three that I have, and it's made as well as when IBM owned the ThinkPad trademark (before they sold the ThinkPad line to Lenovo). Since these are relatively inexpensive, I don't know if these are poorly made or not, but the price may be worth trying one if you have a radio that works with these. Donald KX8K

Yaesu Crystal Filters For Sale: I have a variety of crystal and mechanical filters available that fit Yaesu rigs. All of these filters work 100% like they should, and look great also. . The following filters are for the 8.2 MHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. Yaesu XF-8.2M-251-01, 250 Hz CW filter for the 8.215 MHz IF. $75 Yaesu XF-8.2M-202-01, 2000 Hz SSB filter for the 8.215 MHz IF. $75 . The following filters are for the 455 KHz IF. They fit the FT-1000 series, plus many, many others. If you have a fairly modern Yaesu rig, they probably fit, but check you manual. As a general statement, the filters for the 455 KHz IF are sharper, with steeper skirts. XF-455K-501-01 500 Hz wide for CW $115 . The following filters are Collins Mechanical Filters designed for a 455.0 KHz IF. This means they have characteristics generally considered better than crystal filters. These are no longer being manufactured. - These filters fit a variety of rigs. They were used in a TenTec Omni VII, but I am told they also fit many Yaesu rigs. Please check the numbers. Collins 526-8693-010 500 Hz CW filter Also known as TenTec 2031 Collins 526-8733-010 300 Hz narrow CW filter Also known as TenTec 2032 - These filters are $200 each. Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to W8EK@... or W8EK@... Voice Phone (352) 732-8400 .

Dual Band HTs, HF + VHF + UHF Transceiver, Power Supply, Manuals, and more For Sale: . Yaesu FT-470 Dual Band HT: The innovative Yaesu FT-470 2M/440 HT has many sophisticated features, built into a robustly built chassis with easy-to-use external controls. It boasts four VFOs and 42 memories plus an impressive backlit dual band LCD. Power output can be as high at 5 watts depending on battery pack used. It has a very "tight" front end on the receiver, keeping a lot of intermod out. Features: 42 Memories 4 VFOs DTMF Keypad DTMF Auto Dialer Scanning Backlit Keypad CTCSS Encode Auto Repeater Shift Auto Power Off This particular unit works 100% and looks extremely nice. It has an aftermarket FNB-12, 12 volt 700 mahr battery pack. Also included is the dual band rubber duck antenna, wrist strap, wall charger, and paper work for $100 . Yaesu FT-60 Dual Band HT: The Yaesu FT-60R dual-band 2 meter/440 MHz HT has 5 watts output on both bands. It also features wideband receive from 108-520 and 700 to 999.990 MHz. It includes One touch NOAA weather, nine DTMF auto dialer memories, die-cast weather resistant case, ARTS Auto-range transponder system. 2.3 x 4.3 x 1.2 inches, 13.1 oz Features: Over 1000 Memories 5 Watts RF Output Backlit Keypad Alphanumeric Display NOAA Weather Alert PL Encode/Decode CS Encode/Decode Emergency Auto ID System This one works fine and looks fine. No scratches or defects. It includes rubber duck, belt clip, FNB-83 battery, charger, and paper work for $100 . Yaesu FT-847 HF+++ Transceiver: The Yaesu FT-847 changes base operation forever. Now you get three radios in one -- HF, VHF/UHF and satellite. You get 100 watt output on HF and 6 Meters, plus 50 watts on both 2 Meters and 430 MHz bands. Additional features include: Cross-band Full Duplex operation, Normal/Reverse Tracking, CTCSS/DCS Encode and Decode, 0.1 Hz tuning steps, DSP Notch, DSP NR and DSP BPF, Shuttle Jog Tuning Dial, Carry Handle and Keypad Entry. The FT-847 is also 1200/9600 bps Packet ready. 10.2 x 3.4 x 10.6 inches. Features: HF/VHF/UHF DSP Filters Dual Watch 0.1 Hz Tuning CTCSS/DCS Decode and Encoode Cross-band Full Duplex 1200/9600 Packet Ready It covers all of the normal ham bands in one package with virtually all modes! This one works 100% and looks like new. No defects. With paper work for $775. . Yaesu FP-707, 20 Amp Speaker/Power Supply: The Yaesu FP-707 is a 20 amp 13.8 Volt DC Power Supply, with a very nice front facing speaker in the same enclosure. Cosmetically, it matches the FT-707, FT-747, FT-757 and likely others. Electrically, it can provide up to 20 amps, so will work with most any HF and/or VHF rig. It also has a set of binding posts on the back for easy connection of a rig in addition to the HF rig. The speaker has a 3.5 mm plug on it. This particular unit is in very good shape both electrically and cosmetically. I can not find a scratch, dent, or ding on it. Electrically, it works as it should. Buy this unit with manual for $120. . Yaesu NC-9 B Charger 13 V DC at 45 ma, 2.5 mm plug; $12 . Original Yaesu Manuals: These are the manuals only. All are originals, and not copies. Most are in close to new condition. FNB-9,10,11,12 Battery packs, $2 FC-757AT Antenna Tuner, $10 FT-100 HF/VHF Transceiver, $18 FT-470 Dual Band HT, $10 FT-757 GX, HF Transceiver, $18 FT-720 R, 2 meter mobile, $8 FT-1802 M, 2 meter mobile, $12 FT-2700 Dual Band Xcvr, $12 FTH-2005 HT, $5 FTS-8 tone squelch unit, $3 FTS-12 tone squelch unit, $3 MH-1B A2B speaker microphone, $2 SP-101 P, Speaker / Phone patch, $5 VX-1 dual band HT, $10 Maintenance Service Manual for Yaesu FT-208 R 2 meter HT. Looks new. $25 Technical Supplement for Yaesu FT-2700 Dual Band Mobile. Looks new. $20 These are original Yaesu operating manuals only, in very nice condition. . I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors, miscellaneous accessories, etc. Just too many to list here. Please e-mail your requests. . Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ke

Can I get help with FTdx10 issues on this page? Thanks, Bob W6MTM