¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: Backorder on YD6016LN-CS
As an alternative: If you already have a YD6016LN-CS and want to place another one within a meter of it, take a look at the YD6016ES-CS. You would need an ES link such as the YD6902ES-Ext but it turns
By Oldngrey · #4211 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Apologies Andrew I use 16/0.2 wire if that helps - I¡¯ve checked for any voltage drop - I do get a little but so far all good John XR
By John Critchley · #4210 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
No Andrew Max length 5m and nothing to report ¡­¡­.yet John XR
By John Critchley · #4209 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
John Do you not get any feedback problems due to cable lengths with the? 4088s being so far from the track berths? Andrew
By Andrew Jebb · #4208 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Thank you Karst That very positive response will now spur me on to complete the upper deck of the layout Much appreciated Johnx XR
By John Critchley · #4207 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Thanks Karst. Kind Regards Alex
By sotars · #4206 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Sorry, excuse me. I read it wrongly. Greets, Karst
By karst.drenth · #4205 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
No second thoughts about that (y) should work nicely ! Very nice cabinets by the way !! Greets, Karst
By karst.drenth · #4204 ·
Re: Availability
Well, I think we have seen a pretty nasty example of blindly scaling-up with, a.o. literally tonnes of foreign money... If I remember well that company also originated from The Netherlands ;) Well,
By karst.drenth · #4203 ·
Re: Availability
All true Iain (y) And generally spoken a real pain in th a$$. But good news. We have been able to up-scale the YD9401 production. First we had to tackle the automated production. Which we did by
By karst.drenth · #4202 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Hi there I have 24 detection modules DR4088LN CS - 4 of which are the Yamorc equivalent I have been aware of the max 10 on any Loconet from Iain Morrison- who has given me some great advice over
By John Critchley · #4201 ·
Re: Availability
The YD9401 is one of many items in the YAMORC product range, and the one with a limited sales life because it can only be used with a DR5000 and the market is reducing with so many DR500 already
By Iain Morrison · #4200 ·
Re: Reposted from other forum Hornby R8247 and Yamorc issue , please anyone help
Reference your problem with the hornby point modules,? I didn't find a solution.? I have two on the layout that work and two that don't. I have sent these back to hornby after a month of discussion
By colinayres1@... · #4199 ·
Availability
I have seen many posts on here reference availability.? Obviously we know that the YD7001 is an excellent system which is why we are here. But does a business just not scale up production and it's
By colinayres1@... · #4198 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Karst I am confused by your comment below as I do not have any DR5088C units. ?That is Reded That is incorrect quoting ! ? I was referrring to you, mentioning that you had all DR5088RC !!! when I
By sotars · #4197 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
Polling is the process where the computer or controlling device waits for an external device to check for its readiness or state, often with low-level hardware. Stationary Broadcast and Interrogate
By Inobu One · #4196 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
With what Software do you monitor the reporting ? Greetz, Karst
By karst.drenth · #4195 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
There is no polling .... Neither in the DR5000, nor in the YD7001. LocoNet devices "just send" on input-change and/or power-up.
By karst.drenth · #4194 ·
Re: YD7001 Loconet block detection requires multiple presses of the green button before all report
That is incorrect quoting ! ? I was referrring to you, mentioning that you had all DR5088RC !!! when I wrote that I never had seen the problem before.
By karst.drenth · #4193 ·
Re: YD9401 conversion and 4088LN Gnd modules
Just for 3-rail deployment. Micro switches, reed contacts, IR-gates erc. Will just work ! Greets, Karst
By karst.drenth · #4192 ·