开云体育

i think I've asked this before but lost the info how many YD6016ES modules can I couple to my connection to the ext88n on my yd7001 at the moment I have 12 and they all work fine if twelve is the max

I didn't think a TF4 could be read, only written to and only supports programming on the program track [email protected]> wrote:

I always have some kind of load on the decoder when reading the CV's on the programming track. Usually? a small motor. -- Dennis Cherry Owner/Moderator

Hi Dennis, Thanks for your reply, that is what I have done. Both of the decoders refuse to be read from or written to.? The only connections I have are to the red and black wires, I am wondering if

Did you do these steps? Program the TF4's Address & Function Outputs *1.* Before using your TF4, set its address. This may or may not be the same address as a mobile decoder already installed in the

I have recently bought 2 Digitrax TF4 decoders to control coach lights, I am unable to read or program these.? I have iTrain and a YD7001 and can read and program all my other decoders which are

Good afternoon. Possibly tomorrow, Tuesday or Wednesday, DHL will pick up the package. What I need is to know how to make the payment. As always, I appreciate all your help. Receive a cordial

Good morning. Thanks for the clarification between DCC and Command Stations. I have a 15v, 3 amp powersupplies that I think is correct for the N. Ok, well I am writing to you from the Yamorc page

You have seen that wrong ! The YD7xxx series do not have adjustable power options. You need to connect a proper power supply with the desired output voltage. Oh, and please use correct terminology.

Good morning from Spain. I apologize for my English, I am using Google Translate. I am waiting for the updated YD7001-E board to arrive and I have seen that the voltage can be changed from the

I have far too many Digikeijs modules, I am ready to put the extra assortment up for sale on Facebook Marketplace, starting May 26, 2024.? Thanks, Don

Please ignore, I recognised my error and am now accessing via my browser.

HI, I have recently upgraded my DR5000 to a YD7001.? Its working great, I was getting intermittent disconnects with iTrain but these have now gone. My iTrain/YD7001 interface uses a LAN connection,

Yep

Does the DR4024 servo decoder also have the diodes inside please as that’s what I am using the relays on. Thanks Alec

Pete, Do you already have any DR4024s? YaMoRC is not a closed ecosystem, it supports NMRA DCC and Digitrax's proprietary (but licensed to several companies) LocoNet, so there's a lot of different

Hi Guys, I'm running my home layout on Itrain with Digikeijs equipment, apart from the DR5000 which has a YD9401 upgrade. I have been asked to plan a new layout for our club. We would like to use one

I use those relay modules you can buy online. They are a neat package with an opto for the trigger input(s) and diode(s) for the relay as well as an LED indicator.

The YD8xxx have these diodes inside. :) And... on the DR4102 the were never needed as well. Since the DR4018 also had those diodes inside....

Hi, Up to now, I have been using the RL1 Twin Channel Relay Controller for DC/DCC made by Train Tech, the SPDT relays can be individually addressed.? Using these avoids issues that may be encountered