开云体育

I didn't think a TF4 could be read, only written to and only supports programming on the program track [email protected]> wrote:

I always have some kind of load on the decoder when reading the CV's on the programming track. Usually? a small motor. -- Dennis Cherry Owner/Moderator

Hi Dennis, Thanks for your reply, that is what I have done. Both of the decoders refuse to be read from or written to.? The only connections I have are to the red and black wires, I am wondering if

Did you do these steps? Program the TF4's Address & Function Outputs *1.* Before using your TF4, set its address. This may or may not be the same address as a mobile decoder already installed in the

I have recently bought 2 Digitrax TF4 decoders to control coach lights, I am unable to read or program these.? I have iTrain and a YD7001 and can read and program all my other decoders which are

Good afternoon. Possibly tomorrow, Tuesday or Wednesday, DHL will pick up the package. What I need is to know how to make the payment. As always, I appreciate all your help. Receive a cordial

Good morning. Thanks for the clarification between DCC and Command Stations. I have a 15v, 3 amp powersupplies that I think is correct for the N. Ok, well I am writing to you from the Yamorc page

You have seen that wrong ! The YD7xxx series do not have adjustable power options. You need to connect a proper power supply with the desired output voltage. Oh, and please use correct terminology.

Good morning from Spain. I apologize for my English, I am using Google Translate. I am waiting for the updated YD7001-E board to arrive and I have seen that the voltage can be changed from the

I have far too many Digikeijs modules, I am ready to put the extra assortment up for sale on Facebook Marketplace, starting May 26, 2024.? Thanks, Don

Please ignore, I recognised my error and am now accessing via my browser.

HI, I have recently upgraded my DR5000 to a YD7001.? Its working great, I was getting intermittent disconnects with iTrain but these have now gone. My iTrain/YD7001 interface uses a LAN connection,

Yep

Does the DR4024 servo decoder also have the diodes inside please as that’s what I am using the relays on. Thanks Alec

Pete, Do you already have any DR4024s? YaMoRC is not a closed ecosystem, it supports NMRA DCC and Digitrax's proprietary (but licensed to several companies) LocoNet, so there's a lot of different

Hi Guys, I'm running my home layout on Itrain with Digikeijs equipment, apart from the DR5000 which has a YD9401 upgrade. I have been asked to plan a new layout for our club. We would like to use one

I use those relay modules you can buy online. They are a neat package with an opto for the trigger input(s) and diode(s) for the relay as well as an LED indicator.

The YD8xxx have these diodes inside. :) And... on the DR4102 the were never needed as well. Since the DR4018 also had those diodes inside....

Hi, Up to now, I have been using the RL1 Twin Channel Relay Controller for DC/DCC made by Train Tech, the SPDT relays can be individually addressed.? Using these avoids issues that may be encountered

Don’t forget to add the diode. As in the schematic. As I was told it’s possible to damage the decoder without it. Alec