开云体育

Dennis, Thank you for setting this up. It was very nice to meet everyone on the call. Thanks, Stuart

Hi Jay, after having succesfully updated my WLANmaus using your information (thanks for this!) I think installing the z21 Maintenance Tool is not necessary. The option for WLANmaus update in the

Dennis Is that the same time zone as Chicago or Houston ? How do I get into it from a Web browser ? Richard Edited on Sunday, 3 September 2023 at 17:41 (GMT + 2) à Paris, France; sent later.

www.whereby.com/yamorc ( http://www.whereby.com/yamorc ) Lets do a open meeting starting around 1:00 PM CDT. It is open to everyone. We can talk about YaMoRC products, setup of equipment, Problems,

Ian and Dennis Success finally connecting the WLANMaus for the YD7001.? Once I updated the firmware to the latest level, they connected immediately and I was able to run trains. I have added below

Heath Iain ? Glad it is working Iain

Ian, thanks!! -- Heath -- Heath @ Human[c]ity http://www.humancity.org ( http://www.humancity.org/ ) http://www.riversidetransfer.nyc ( http://www.riversidetransfer.nyc/ )

You use 3 wires with a DR4018 and set the DR4018 into Mode 6 Many Thanks Iain Morrison wrote:

And apparently I just needed to look at little deeper, aka look at the YaMoRC manual, not the DR4018 manual. I am not completely sure I understand what settings I will need in the DR4018, but

Hello, How would I wire the MTB MP 5 point motors with a?DR4018/DK50018/YD8116? Would I use the DR4101 and use two wire control of the MP5? Or can I use three wire control of the MP5 and go straight

Hi Previously I have observed that when there is a good and solid LAN connection between the YD7001 and a router the LAN LED is yellow and always ON.? Has anyone else observed a different behaviour

I really like these little detours these threads sometimes take. Keeps life fun! Cheers

Google is correct. for the distance and driving times. Both routes are toll free. William died in Rouen at 60 and is buried in/near Caen. Have a bunch of neighbors (about 10 km away), one is HO gauge

Dennis I don't have access to the WLANMaus nor the YD7001 except at the club.? I hope to get there this afternoon. Ian I will have to update the WLANMaus firmware before the next attempt to get

According to Google Blainville-sur-mer is 142km from where William the Conqueror was born in Falaise, Duchy of Normandy ?

Wow I didn’t know that was his birthplace - for some reason thought it was in Belgium I was born in a little fishing village near Southport - Liverpool birthplace of the Beatles and Hattons and the

I and two of my friends, in the land of the birth place of William the Conqueror, are looking forward to the release also. Richard Edited on Tuesday, 29 August 2023 at 13:21 (GMT + 2) à Blainville

So looking forward to your release Karst. It is the one thing on my layout that is sadly awaiting a YaMoRC solution ?

Jay if you want I can talk you through the steps. Go to the room whereby.com/yamorc ( http://www.wherebyt.com/yamorc ) I am there right now, and have my Multimaus setup and running on the YD7001 --

You shouldn’t need to put the port in as it is the default port, but worth checking. You will 100% need to update the firmware on the MAUS, you can get the firmware at z21.eu Many Thanks Iain