You shouldn¡¯t need to put the port in as it is the default port, but worth checking.
You will 100% need to update the firmware on the MAUS, you can get the firmware at ?
Ian
Thanks for the very fast response. Once I have entered the IP address for the Z21 interface, do I need to also enter the 21105 port number into some field in the throttle interface?? If I don't, then I would assume the throttle will just use the default value??
Yes, I will double check that the port number for the Z21 interface is 21105.
Thanks.
Note: we have not used these throttles in 3 years so their firmware may be out of date.? I will need to check that tomorrow when I am at the club.
