开云体育

i own a 2008 x air hawk and it is fantastic aircraft! i purchased it 3 years ago for 18,000CDN with jabiru 2200 2nd generation motor with 120hours on it. which specific x air hawk are you interested

Hello all, I'm interested in purchasing an X-Air Hanuman and registering it as an AULA in Canada. Appreciate any help in terms of who the distributor is. I've reached out to X-Air US and Raj Hamsa in

Clive, Thanks for the information. I just finished today replacing the cables. I found a local company that had cable on a roll and they cut me 2 8ft pieces. Ace hardware has stops and tool to attach

If you are stuck, we have a company here that I use for motorcycle cables - clutch, throttle etc. They custom make at reasonable prices. X Air brake cables would probably be around $150 AUD for the

I am still looking for a source for brake cables. Thanks, Bob N929XH

This photo just came into my mailboxfrom an owner in Romania asking a few questions. I thought I would bring it to the group because it shows a couple of very inventive modifications. If you look at

I have all the parts in stock, I cant locate the brake cables and will need to check elsewhere because i know i have them. Also just found a heap of brake pads for both the standard model and the

Michael, thanks.? ?355419 Cam protective plates (4)? ? 366 Brake sleeves and cable (2)? ?355251 brake cable stoppers (2)

Please tell us what you need exactly using part numbers from the parts manual. Then we will be able to help you further, just saying small tabs doesn't make a lot of sense to everybody ......?? many

Just took delivery of N929XH after a 900 mile ferry flight. I have started going thru the plane and need the brake cable for the right brake. Also need the small tabs? at the bottom of the brake

Just some notes here. I found the drum brakes to be primitive and less than efficient. Mine failed when the shoes kinked sideways and destroyed the drum, shoes and backing plate. No parts were

Good point. There are lots of options on Amazon for go kart brakes. There are mechanical and hydraulic options. What size rotors are you using? Looks like 7” +/- are standard. The hydraulic would be

Hello everyone, the problem with using bicycle parts is they are simply not made to stop the weight of an aircraft. The calipers are just not strong enough and will eventually fail the first time you

Can you give us the Shimano model or part number you used. Thanks, Bob

So your Hanuman does not have shocks? It's only your X Air standard? ________________________________ Sent: Sunday, December 11, 2022 10:50:21 PM To: [email protected] <[email protected]> Subject: Re:

Ah, I may have introduced confusion! The disc brakes are on my X -Air standard, with shocks I also own an X-Air Hanuman, which has the bungee suspension. I will be putting the disc system on that one

Hello Clive May you take more pictures of your aftermarket design in regards to your front and rear landing gear / suspension system on your X Air? I am quite interested in what you did and how you

I have fitted disc brakes to mine. Using mechanical cable operated calipers and stainless steel disc rotors. Fabricated mounts from aluminium. Not pretty, I admit, but works fantastic! Way more

Hey All, I recently bought a 2008 X - Air H. With original type shoes brakes. I was wanting Idea's about brake upgrade info. Thanks? Todd? Mooresboro, N,C,

after splicing through the multiple broken plastic clip connections, the auxiliary fuel pump works as it should, but the ammeter still bounces around like crazy, once the pump is running and the motor