开云体育

Hello Michael, the best way is to do with exactly the same as it is supplied originally by Rotax, that way you know everything works michaeltyler via groups.io wrote on 29/12/2024 11:21 pm: -- With

Hi, I bought a 2nd hand 618 xair quiet a few years ago that had the oil injection removed because the previous owner reckoned he had some problems with it. I have been premixing the fuel and had no

Can't recall. sorry. Just measure up. Clive Cunningham K&M HD Motorcycles 2/5-9 Kingston Ave Richmond SA 5033 08 8234 1090 kmmotorcycles.com.au ________________________________ Sent: Tuesday,

Please make sure it is UV rated polycarbonate. The stuff you will get from a hardware store may only last 6 months if it spends a few days out in the sun. If it is not UV rated it very quickly gets

Yeah, I wasn’t able to check yet, I was just hoping a 60”x30” sheet would be big enough. My local Lowe’s has those in stock.

The standard size sheet of Lexan/polycarbonate is 8' x 4' Tom Yoder wrote on 25/09/2024 5:07 am: -- With regards, Michael Coates AU +61 7 5522 0583 mailto:mcoates@... Please note:

How large of a sheet did you need?

I used 1/8 lexan . Worked good. Very strong [email protected]> wrote:

I cut mine from a single piece of 2mm Lexan. Clive Cunningham K&M HD Motorcycles 2/5-9 Kingston Ave Richmond SA 5033 08 8234 1090 kmmotorcycles.com.au ________________________________ Sent: Sunday,

100 % stay with 2mm ! Jonathan Webb wrote on 23/09/2024 4:36 pm:

I've just replaced one windshield and one door on my Xair Falcon. I used Lexan which is a top brand of Polycarbonate

I'm looking at replacing the windshield on my H. I think a few here may have done so previously and was hoping someone could advise on what material (polycarbonate or acrylic) and thickness has been

Thanks Michael.

Hello Byron, it is the main fuselage tube. You can just measure straight behind the engine or just in front of the seats...?? the fuselage boom tube towards the back can have a very slight angle so

The operation and maintenance manual for my X-Air Standard simply says that weight and balance weighing must be done with the aircraft level. It does not state what reference surface is used to

Thank you for doing this, i am sure it will get used ! kymidnight@... wrote on 30/08/2024 12:09 pm:

Any word on that 912 engine mount, Michael?

I have a Hanuman/Hawk with a Jabiru 2200 engine on it. Not being its first owner, I ran into a problem, specifically, one of the previous owners had lost the intake airbox and replaced it with a

CONTACT SAM RAMSEY HE IS A X AIR STANDARD MECHANIC SRAMSEY4U@... HE OWNS ONE. Sent from Mail for Windows Sent: Friday, May 31, 2024 11:01 PM To: [email protected] Subject: [XAIR] X-air

Hello, we ran the 618 engine for years and years basically without any problems. If you let them warm up properly before you go hurtling down the runway they seem to last forever. Every 200 or 300