开云体育

Hello everyone, Is the title says can the 5105 use an external unamplified speaker? Also in menu number 6 there is a button that is marked s/p. You push the button and it goes between speaker and phone. Also the icon next to the volume level bar changes from a speaker to a headphone. Doesn't seem to do anything else. I was hoping it would change the characteristics of the headphone jack to a speaker jack but no joy. Just wondered if there is something wrong with the radio or that's the way it works normally. I would like to use it with a clear speech external DSP but it only supports speaker level input. Also an 8 ohm speaker itself doesn't seem to work. -- Thank you, Randy AB9GO

My X5105 was working fine but suddenly started randomly dropping its power output to below one watt . Some time it would work for over an hour with no problem sometime failed after a few minutes.Running the ATU would mostly make it fail or come back. Being out of warranty I was out of luck. When I finally had some free time I decided to open the radio in search of a bad contact. While unscrewing the back panel it felt weird on the screws. After removing the panel I found out that 2 of the 4 brass standoffs were still on the back panel while the two others were on the PCB. All 4 were loose. I removed the two from the back panel and secured them on the PCB and tied the two other ones. At this time I did power up the radio with the intend to search for a bad contact but the radio was now working and running the ATU it continued to work.I did reinstall the panel and it has been working since then, over a month now, and didn't fail a single time. Xiegu uses the brass standoffs for the ground return between the PCBs. The standoffs being loose were making intermittent contacts. I thought I share this for the benefit of others who might have a similar problem.

I’m not sure if this was covered here or not but picked up one of these great little batteries and wanted to share my thoughts on it. Bioenno Power model BLF-1203 12V 3AH 36W hours lithium iron Phosphate battery. You can draw a constant 3 amps and a max surge of 6 amps. This battery weighs only 0.8 lbs. (0.4 kg.) the battery can run the X5105 a long long time and takes only 2 hours to charge. the Bioenno Pwer company also sells the for charger for $20. And I’m pretty sure it will charge all or their batteries in case you want to own more then one. I plan to buy a larger 30A battery to support my Yaesu FT 991A. here is a link to the company: https://www.bioennopower.com/collections/lifepo4-batteries-for-communication-equipment-ham-radio/products/copy-of-12v-3ah-lfp-battery-pvc-blf-1203a anyway, I’m I’m also planning to purchase the LightSaver Max Portable Solar Generator. From what I’ve read, they are of the highest quality on the market but they are not cheep. They are also sold out and won’t be caught up on production until March or so. If anyone owns one of these, I would love to hear your thoughts! Here is the link for this power option that seems to be both comparable and a perfect fit for the X5105 field operator. https://www.powerfilmsolar.com/products/lightsavers/lightsaver-max-portable-solar-charger thanks for reading and 70+3 hi hi KG2RG Out!!

Has anybody experienced connection problems with the ACC port using the 8 pin din to trrs cable for ft8? I was having intermittent interruption of the decode and transmit audio and solved it by reseating the plug. Now the decode side works but the transmit audio isn't making it through and no amount of reseating corrects it. Tried a different cable with the same result. I guessing it make be the port itself. Any thoughts?