开云体育

Hi group! Just an update on the battery rebuild thread.... I just did another battery rebuild and it went together perfectly.? I know it is a data point of two but I am certain if you are careful

I was just thumbing through the wonderful KE4RG version of the Operation Manual and noticed an important omission. I'm speaking of V3.0 Rev. B which, I believe, is the most up to date one. On both

Hi JP, Thanks for your response. Yes, I did the standoff tightening about a year ago. It did help the output power increase, but the intermittent output down to 0W continued. As the problem got worse

Lou, I had two of the 5105s that did that. The fix action is to disassemble the radio, BE CAREFUL of the side panel prop leg springs. They will fly out. The radio has three or four boards and use

Hi X5105 Group, This is a follow up post to my previous post (1/10/2023) on my X5105 that had intermittent transmit/PTT. After months of trial and error with no clear indication of a physical

The paddle works on other radios and. keyer. I will check the wiring. Thanks John

Hi John, FYI, I operate only CW with my X5105 and have NEVER used extra long plugs for my key. It has always worked flawlessly, whether a SK or paddle was plugged in. Make sure the plug is wired

I remember seeing photo ads with 1/8 inch stereo plugs that were extra long included with the 5105. I can get my straight key to work but not the paddles. Dots only work. I guess I need the extra long

Xiegu.eu/downloads

Hello John, Where did you find the download link on the xiegu.eu website? I look out there and under support there's nothing. The main page there's nothing. Where is it at?? I'm trying to get the

I went back and checked. I installed X5105_App_V3.00_build007.xgf The other version was v3.00 beta06 build006. Was it necessary to do the beta version first? I just did ver 3 build 008. I think it

I have heard of sub version variants of version 3 (6 or 8?) Is that’s true? What was the last version for the 5105 and was it from radioddity? I upgraded from 1.x something to 3 and lost the

Sounds like a physical issue with the jack or wiring to the jack. I have never opened one up but guess it may be a surface mount jack partially broken loose from the board. Maybe a little soldering

I've not found anything on this issue in search.? I went through all the settings and changing a setting that looked like it might be relevant didn't fix this. I put my earbuds in the earphone jack

I had my X5105 working with a DE19 previously. I switched over Digirig for a while because it is easier for field use. I switched back to the DE19 for use with the XPA125B, but now the transmissions

Is any one using an XPA125B and CE-19 to connect an X5105 to a PC for FT8? A connection diagram would be appreciated. TIA

Do you turn ON the Option LIN and LOU at the X5105. Line-IN and Line-OUT must be set to ON to get the Signal out of the Radio. Line IN must be OFF for using SSB-Phonie and CW.

check pskreporter.info

Jim, Call CQ using CW & then look at the reverse beacon network for your call. Put your call in the Spotted

I transmit at 5 watts but get no reply. VFO-A USB a button icon and the word tune appear on top of the screen. Do I need to change something?