开云体育

I get USB C disconnect when transmitting VARA FM and a Digirig sound card connected to a HT that is not in my hand or with a tiger tail counterpoise….so it is likely an RFI interference issue for

I’ve got TeamViewer up and running, John. K0ION Sent: Tuesday, February 11, 2025 10:07 AM To: [email protected] Subject: Re: [VARA-MODEM] Vara FM and Alinco DR-B185 If I ping the

This sounds like RFI (Radio Frequency Interference) -- transmit RF is being picked up by the keyboard cable and blocking the keyboard input until you stop transmitting. What kind of TX antenna are

Can you ask someone in your club to monitor the gateway while you attempt to connect and listen to see if the gateway is responding? [email protected]> wrote:

If I ping the gateway, after it transmits I get no RF response that I can hear. As soon as the transmission (ping) is through, the receive background noise can be heard but no RF signal. I appreciate

That is actually my club's gateway. I have tried that one and a couple of others..... 73 John Smiley-KZ4ZK

Hi, Windows Update is not an issue here.? The COM port works fine.? Scanning through 8 frequencies works well.? VARA TUNE puts the radio into Tx mode.? The waterfall works fine.? But when the

Sent: Tuesday, February 11, 2025 7:56 AM To: [email protected] Subject: Re: [VARA-MODEM] Vara FM and Alinco DR-B185 Yes the full call sign is in the box....also, since I increased the

Simley, What is the receive audio connection from the radio to the signal-link? Is there a way to tap into it to monitor the audio? Is the radio’s speaker cut off when this connection is in use?

Yes the full call sign is in the box....also, since I increased the volume of the audio, the countdown starts transmitting from 4 all the way to the end but the response is still "no signal". I am

I agree, Windows is notorious for what you're speaking of. If I experience any problems regarding a Windows update, going to? directly to 'Device Manager' and correcting the settings, takes care of

I find I have to use devise manager to assign specific names to my com ports as well as windows 11 sound mixer to keep the auto updates from messing upy ports. It also looks like they are using their

Hi all, Well possibly.? I start RMS Trimode connected to a TenTec Jupiter with VARA HF.? After that my USB keyboard won't work.? Does this sound familiar to anyone?? Possibly related but Norton

Are you using HF (SSB) or FM? It sounds like an audio drive level, just for a preliminary guess. But there could be a slew of other factors involved. Doug / N3JXB

um, yes. Click on *Log* at the top of the VARA window. 73 John Denison KD5YOU

That's genuinely useful information! Assuming that the SignaLink 'PTT' LED matches the 'transmit' state of the radio, you need to increase the transmit audio level from the computer to the

It only transmits at the end of the auto test.... ?? 73 smiley - kz4zk On Mon, Feb 10, 2025 at 15:32, Mark Davis via groups.io<markad7ef@...> wrote: And, are you seeing the

I'm pretty sure it is but I'll check... ?? 73 smiley - kz4zk On Mon, Feb 10, 2025 at 15:10, Mark Davis via groups.io<markad7ef@...> wrote: Smiley;?When you perform the

And, are you seeing the red 'PTT' LED on the SignaLink light up during the latter part of the "Auto Tune" sequence, and is the transmitter keying on your DR-185? When using the SignaLink for VARA FM,

Smiley; When you perform the "Auto Tune", is the full call-sign of the gateway station (including the -nn extension) entered in the "Calibrate with:" field, on the VARA FM "Drive Level Calibration"