开云体育

And, are you seeing the red 'PTT' LED on the SignaLink light up during the latter part of the "Auto Tune" sequence, and is the transmitter keying on your DR-185? When using the SignaLink for VARA FM,

Smiley; When you perform the "Auto Tune", is the full call-sign of the gateway station (including the -nn extension) entered in the "Calibrate with:" field, on the VARA FM "Drive Level Calibration"

Yes ?? 73 smiley - kz4zk

Smiley; When you open the squelch on the DR-185 (in receive) is the needle on the VARA FM "VU" meter in the green zone of the scale? Mark - AD7EF

I'll check it with another radio.... ?? 73 smiley - kz4zk

Can you listen to the gateway channel on another radio to see if the gateway is responding to your radio's initial connect request? It seems that you say your radio is now transmitting, different

Settings all seem to be what you guys have suggested. Radio is transmitting but still will not connecting to a gateway. I have tried several gateways and none will connect. Signalink tx and rx set to

Hello, I am sorry if this is not the right group but maybe some who know VARA protocol could give me a hint please? I am connecting to a Winlink RMS using VARA using our radio club callsign,

Hi, Lorrin, unfortunately, mine is Lenovo N23. It has no connectors and no replacable parts, everything is soldered on-board. I lent it now to a friend to let him get familiar with Linux and JS8Call

Made a couple updates and bug fixes. Still in beta! But it works great!

Did you solve this problem? Please let us know. [email protected]> wrote:

I know it isn't exactly what you asked, but I was able to install cheap 128gb SSD's in both of my Chromebooks and now run Linux on them. After taking the many screws out to split the case, just

Marek SP5ISZ Going by what YouTubers say, "Radiomail" the author was working on getting the IOS cell to work. It would be a firmware update. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU

@Steven, @Don, Thanks for your replies re. Vara FM over Bluetooth KISS TNC. I continue to build an audio interface (600 Ohm transformers, optocoupler for PTT), so I should be able to proceed with the

I have previously used VARA and VarAC on Lubuntu 24.04 LTS without any issues.? It was stable and working correctly. However, in the past week there has been a version upgrade of Wine 9.x to Wine

This is the method I use to execute bash commands within a .desktop file automatically at startup: https://www.linuxuprising.com/2020/11/how-to-launch-startup-applications-with.html?m=1

Make sure the SignalLink Delay is OFF

Following is the terminal command that I use. wine c:/VARA/VARA.exe My setup is a Pi4B runnin on 32-bit Bookworm. This is my first attempt at a Bash script to start Vara and wait until it is

Hello, recently I purchased and reflashed Lenovo N23, 4GB RAM, 16 GB flash. Running JS8Call to my complete satisfaction, using QDX and/or QMX transceiver (both have built-in USB CDC's for serial and

Smiley; You made it clear in your original post that you're using a SignaLink as a rig-interface device with your Alinco DR-B185 radio. I don't know why people are giving you guidance relative to