I'll check it with another radio....
?? 73
smiley - kz4zk
On Mon, Feb 10, 2025 at 12:23, Bob W0EG via groups.io
<morrisnc7@...> wrote:
Can you listen to the gateway channel on another radio to see if the gateway is responding to your radio's initial connect request?? It seems? that you say your radio is now transmitting, different from before.? If your radio?is transmitting and the gateway replies but VARA says NO SIGNAl, then the issue may be with the received audio to your interface.
Settings all seem to be what you guys have suggested. Radio is transmitting but still will not connecting to a gateway. I have tried several gateways and none will connect. Signalink tx and rx set to 1200, delay off.
When I autotest.....it counts down, sends a signal, but response is "no signal"
PTT is set to VOX, device input and output set to usb audio codec, channel L+R
TCP ports? ? command 8300? ? ?data 8301? ? ?kiss 8100? ? frequency properly set? ? narrow/wide properly set? ? tried both high power and low power
?????
On Sunday, February 9, 2025 at 08:16:48 AM EST, Bob W0EG via <morrisnc7=
[email protected]> wrote:
Did you solve?this problem?? Please let us know.
?
I am unable to get vara fm to work using an Alinco DR-B185 and a Signalink. The system works fine sending and receiving winlink packet. I think I have tried every setting available. Computer is a Dell Latitude 6410.
?
Any ideas......
?
Smiley
Ellijay, Ga.
SMILEY kz4zk