开云体育

Hi All, I have a new setup of UI-View32 and am using it with my TM-D710A in TNC mode (using a custom .CMD file for it). I have not set up any Internet stuff, strictly RF. In the terminal I am

Hi Try changing the comms set up to KISS mode. 73 Jeff G8HUL

Is the program installed at the root level? Kevin KD7DFV

My UI-View keeps quitting! It stops updating incoming packets and sits with no terminal updates and no beacons being sent. When I try the Control C and enter a command, it seems frozen. I then go to

hi all well i did not add much choice to switch at W10 ,,my w7 pc is dead. i lost my data too,,,, i tried some research on google and found even some infos from,,,,,2006!!!so i am not certain at all

Basically, you connect the radio receiver audio to the computer record? LINE-IN? or MIC? jack for RECEIVE.???? And connect the computer audio-out? (usually called? "LINE OUT",? "SPEAKERS",

well Stephen i never used a soundcard with a radio,,never connected one . you have to connect the Speaker of the SC at the speaker of the radio? fr the

1270c will not TX when Rec led is on. Try turning up radio squelch to eliminate white noise and tnc should tx. I run my MFJ in CMD ( not Kiss) mode; no issues. GL 73 William Barron W1WAB

Hardware TNC-2s are so last century! The UZ7HO Soundmodem will work on practically any sound card, VASTLY outperforms the 40-year-old hardware TNC-2 design,? and is FREE!?? It starts and runs

Hello Scott me too it has been years since i played with those old tnc,i have 3 of them and they are all different ,, i am becoming an old man and it is also becoming harder to play with software

Here is a link to the 1270c manual on repeater builder. https://www.repeater-builder.com/mfj/pdfs/mfj-1270c-1274c-tnc-manual.pdf And this link may help you out with cable info as well.

Hello Gervais, It’s been many years since I played with and MFJ TNC, but I think it is as simple as KISS ON and then RESTART if I am not mistaken. Best of luck! 73 -Scott KD4YDD

hi i am reinstalling my Igate, my tnc mfj1270c does not initialezed well, i can see the Receive LED on,but the TX does not work and i remember decades ago there was something to change in the 'init

I have tried on multiple times to use Ui-view with to success. After much and careful thought I have decided to abandon Ui-View. It is old technology and not supported. Therefore I am deleting it

Have you gone here? http://wa8lmf.net/aprs/UIview_Notes.htm He has everything you would probably want Kevin KD7DFV

March 1, 2023 I have tried everything I know to register or reregister with no avail. Have followed instructions. Registration still says my registration number is still invalid. That is as far as I

Excellent write up and analysis. Thanks for sharing Dwight n2fmc@...

The test run was a complete fiasco with numerous hardware and software problems. For example, I discovered the FLdigi program's audio detector? on receive is so sensitive that transmitting on one

Stephen, I am betting on Vara. The previous test you made with Vara was a real accomplishment. The first time I ran Vara on Winlink I was amazed that it could decode stations that I could not

Fun project Steve! Thanks for sharing! Kelly