开云体育

For years, my home APRS Webservers have been running on a Comcast cable modem Internet connection? that barely yielded a 500Kb/sec upload speed. As of 1 May 2021, these servers are now using a 100

And Mike if i may add , Uiview is simple to activate,of course its not "technological" as some software but it depends what are your needs. i have been using for decade and still is doing a good job

Thank you fir your response! 73’s “It’s impossible to know what you don’t know!” ** * Eldon Richardson, W4IOS * Cell: 1(601)227-6690 * E-Mail: eldon.richardson@... **

Hi, A weather station with software that produces wxnow.txt will be needed for UI-View to post wx data. Good luck with your project. --Stan Y. KH6HHG Maui, Hawaii

Hi, This might help: The Latitude and Longitude are in the format dd.mm.nn<C>. "dd" is two digits for degrees. "mm" is two digits for minutes. "nn" is two digits for decimal minutes. NOTE - decimal

What is the format for the latitude and longitude setting in UI-VIEW? I have tried two different formats and neither works.. Thanks and 73.. “It’s impossible to know what you don’t

Ui-View normally puts an icon on the desk top, so use that, failing that the mysteriously named uiview32.exe is the program to run. Ui-View is normally very easy to install, the only proviso is NOT

I have made contact and began mentoring efforts. Kevin KD7DFV [email protected]> wrote:

Eldon, UI-View was frozen in time upon the death of the programs author. He decided that after his death the program would not be further refined. Fortunately a number of devoted users have found

I don't know if you are wanting your hand held or what other reason you are being intentionally vague, but if you try and then hit a wall, more people would be able to help. Come to a stopping point

You call that easy! It will take me weeks trying to understand all of that. Too many choices and do I need all the choices?? Thank you for your help, I think. 73s “It’s impossible to know what

It is actually very easy! I know that sounds sarcastic, but it's not meant to be. Follow instructions very explicitly here: -> http://wa8lmf.net/aprs/UIview_Notes.htm Kevin KD7DFV wrote:

I going to butt in here and maybe I shouldn’t. I have been working for two weeks to try find out HOW to install this UI-View program with NO luck. I have downloaded the program but have not figured

You should use the path settings recommended by the Digi operators near you. Where populations are less dense you likely can use more complex path settings. Where populations are dense, most digi

Should we be using standard settings for APRS - I have tried variations settings using wide and trace 3-3 etc etc and not sure what settings we should be using to gain best use. thanks Dave m1doz

What is a good reasonably priced weather station that works well on ui-view. and is easy for data file to be recognised and uploaded. thanks Dave m1doz

the OSM Maptool version 1.4.0.0," Before you you do anything with UIview, read my extensive notes on the program at: ? <http://WA8LMF.net/aprs/UIview_Notes.htm> IMPORTANT TO NOTE Roger Barker

Evening foks, I am new to the UI View program and I have a few questions that I cant seem to find answer for, and I thought I would try here. 1. I was told there are new "maps" are available and

Burt AF5AA wrote... Simply register it again. You won't get an email. You revisit the registration page a few hours or a few days later and retrieve the info. UI-View Registration:

Same basic issue. “Old” UIView registration number works; new registration # obtained recently from website does not. Perhaps it’s related to how you type in your name. In old version (when we