开云体育

Bob, There is no formal request mechanism, but pretty much everything in the Byonics line came about from people asking via the old Yahoo Groups, by email requests, or face-to-face meetings at Ham

Thanks!

I believe all you have to do is tell your friend to send a mostly blank email to: mail this from the address that you wish your TinyTrak post to be sent to. I usually put "Subscribe" in the Subject

Is there a facility to make feature requests for the Byonics hardware, firmware, and software, which would allow us to track the request acceptance or progress?

Yes, he was the copy of my email, and thank you for sending him the invitation. 73, Ben Sent: Tuesday, April 07, 2020 10:29 AM To: [email protected] Subject: Re: [TinyTrak] New Participant

If he was copied on your email the he was sent an invitation. Or, he can visit?/g/TinyTrak/topics and follow the "Join" instructions. Joe, Group Co-Owner

I have a friend that would like to join the TT4 chat group and I have forgotten how to do it. Can you tell me how a new person joins the group? Thanks, 73, Ben

No. There is no way to manually do a "factory reset" without first having the ability to communicate with the device via a serial link. Just a point of clarification here: specifically, when are you

As Byon said in an earlier post, if you are seeing only a GREEN and YELLOW LED, you need to start over, the firmware is not working properly.? You only think everything is installed. From his

I just cannot get into the TT4, I have everything installed. The problem is getting the TNC to reset, I can see the ? but that's all I can see, the yellow and green light is on, the terminal program

If you are trying to connect at a baud rate you had set, that is very likley the issue.When running TeraTerm on poweringthe TT4, you should see the "?" and other boot info.If not, you probably have

I had a friend's TT4 and couldn't get into it with my null modem cable.? However, I found that the Byonics Serial to USB cable would work with Tera Term on Windows 10 and communicated even when I had

My GPS is a GlobalSat BU-353S4 USB GPS receiver. [email protected]> wrote:

If you just see the only yellow and green LEDs on powerup, and not the double LED sweep, then your firmware has been lost. You can fix it with

...And you have downloaded the specific USB Drivers for your programming cable from the Byonics website? Can you see the device (Prolifics) identified in the Device Manager for Windows, and see the

Yes I am using the complete package from Byonics, interface cables and GPS too Sent from my iPhone XS Max

FYI, not all of the TT4 commands are available though the keyboard/LCD interface, the RESTORE command is not available. N2NWK: If you cannot establish a serial connection, there is no way to restore

Tiny Trak 4 Factory Reset issue - 1. First things first: Make SURE you are connecting to the TT4 tracker unit from your PC using a NULL MODEM Serial Cable (or NULL MODEM Serial-to-USB conversion

How to reset my TT4 to factory default. I can't event get to Terminal program, I can't even get into the TT4 to change anything, I have the green and yellow light on, that's ?about, I can't do

That's excellent info Bill. Congrats. What type of GPS are you using?