开云体育

Direwolf does all that an much much more. Keith, WA0?TJT

Do you need maps and client stuff? You should be able to compile Xastir for a RPi. David, AC0VH

I am using APRX command line on a pi, but connecting to an OT2 - will probably be compatible with TT4. Can't test as i only have a TT3! 73 de Nigel ve3id -- Nigel Johnson MSc., MIEEE,

Is anyone aware of any software similar to APRSIS32 that will run on a Raspberry Pi to use a TT4 as an iGate? Thanks, Curt M.

Thats great Joe, thanks for letting us know. Regards, Doug VK2XLJ ________________________________ Sent: Sunday, 19 April 2020 1:35 PM To: [email protected] <[email protected]> Subject: Re:

Yes, the presentation - including comments - will be recorded. Our host will post it to YouTube soon thereafter and I will post the link. Thanks again for the question, Joe, N2QOJ

Thanks, Doug, for the great question. I will put the question to our host AG7GK and report back. Regards, Joe, N2QOJ Joe Sammartino 24/7: 480.270.4563 Mobile:

Hello Joe, Will the presentation be recorded for those of us who can't make it live and say put up on YouTube or Vimeo??? Regards, Doug VK2XLJ ________________________________ Sent: Sunday, 19

*APRS Overview - Virtual Presentation* Aaron, AG7GK, will be hosting a presentation on April 21st. This will be a casual overview of APRS on 2 Meters, equipment, tips and tricks, fun

I appreciate everyone's time and advice! I was guessing my PIC version might be an issue, but I wanted to give it a try. I'm going to order a new TT3+ kit as well as a built TT4 to mess with.? I'll

Rob, The newest Configuration program, v1.4.6, is compatible with almost every TT3-based product, including? Micro-Trak products. Since Brad said this was a very old TT3, it probably has a PIC 16F644

Nope. That's just a TT4 thing. Allen AF60F I am sure there is a luist of commands that can be used in a terminal program.

I just checked.? It appears there are upgrade options for the TT3 firmware.You should look into thaf option, and then match the config withe ghe firmware. On Sat, Apr 11, 2020 at 21:46, Rob

Appears to be a version issue.The configuation application is for firmware v1.03 and your TT3 has v1.00.Have you tried TeraTerm or other terminal program and just tried listing the settings? I am sure

Thanks for the response Allen, I appreciate it, "Send tones" does illuminate the PTT LED until "stop" is keyed. I set FIFO buffer to off. I still get the following- TinyTrak3 not found : (TinyTrak3

Brad, Try using the "SEND TONES" keys. If these work, and force the TT3 to transmit ( Just a red LED in this case), you will know that your cable is working, and that you can communicate with the TT3.

Having some time on my hands, I dug out my old TinyTrak3 which I hadn't used in years. Upon powering up (13.8 v) the PWR LED illuminates, the CD and GPS LED flash 3 times, and the PTT LED flashes

Rob, I thought it was clear that using the term "old yahoo group", and the fact that I was posting to the new consolidated, .io group that this is the best place to place any questions or comments

Bob, As Allen said, nothing official, but I do consider all requests. Feel free to email me. Byon, N6BG Byonics

Allen, You should reference the correct group.? Everything moved to Groups.io - which is where you addressed the message to. <grin> On Tue, Apr 7, 2020 at 16:30, vhsproducts via