开云体育

wrote: curious about It's and much --------- I have browsed through the cataloges from the time (1965 - 1968) and have not found it mentioned anywhere. I do have a datasheet but unfortunately

Hello everyone, Does anyone have an experience with spot welding tabs on a subC size NiCd batteries? I have a stack of ten batteries which were connected with nickel plated iron (?) tabs, welded at

Do comments from Victorias_Big_Secrets count? He has got more from her than anyone else. Most of his feedback is for buying on e bay, rather than selling. Regards Miroslav

The application for this fixture, that I know of, is gain setting for differential plug-in 7A22. Regards Miroslav Pokorni

I picked up a Tek 017-086 TD pulser a while back. It is self contained and about twice the size of its GR connector. Power is from 2 internal coin cells. Risetime printed on it is <.2ns (200ps). It

Hello Ed, Here is what I have on TU-5, a data sheet that I got on this list. I have a hulk of a TU-5 and it does have BNC connectors; perhaps in earlier version this unit had UHF connectors. Be

Any other test equipment fans going to Dayton? Maybe we can organize a collective? (I saw Stan there two years ago in the ever dependable rain) (And I promise to update my 7K pages, Real Soon

Hi, gang, With thanks to Guido Kueppers, the following additional file(s) is/are now available on the Blue Feather FTP archive at ftp.bluefeathertech.com. File name: 12RC11_U140.bin Path:

Didn't realize this stuff was so valuable. I have a few items I could probably be bribed out of. Self contained 30ps pulser works http://nm7u.tripod.com/homepage/td1.jpg http://nm7u

That's interesting - thanks! I'll put that one on the list. The 152-0154-00 is used in a number of things, including the TU-5. The diode is 10mA/9pF, giving a switching speed of about 450ps, which

know on in. ------- John, I have a couple of those too and I have never given it much thought what they were used for, I would assume for demo purposes. Anyway I find them pretty useless. First of

brew. --------- Ed, the specs for your little box is: Output: Ampl: 200 mV +/-10% into 50 ohm Risetime: 1 ns or less into 50 ohm Abberations: +2%,-2% total 4% pp Input: + or - 100 V squarewave

I've got a working R7844 dual beam mainframe up on eBay. Maybe somebody on the list needs

Well, I'd like to say that I had the answer to that, having compiled lists cross referencing TD's to Instruments to Specifications - but I draw a blank on that one. I *think* that a later version

Brilliant, Nice job, especially providing an index. If I ask really nicely can you crop the bottom of the pages so it all fills the full space? Cheers Robin In message <c3cd97+kveb@...>,

Hi, Gang I picked up a Tek 067-0554-00 tunnel diode pulser. (There's one for sale on eBay now, it you'd like to see a photo). It is a little box that goes between a 100 volt square wave generator

Hello All, I received a Tektronix Pocket Signal Generator 015-0580-00 with the 465 that I purchased. It has a scope connector on one side and a short cable with a bnc connector on the other. I'd

Hi, As I started to clean up the mess with all my manuals the other day I came across a publication I didn't even know I had. It's an almost 100 pages document called "Troubleshooting Your

I have a Tektronic 576 Curve Tracer, comes with the Transistor/FET and the Diode Test adapter. Also has an "original" Operating/Service Manual (unheard of these days). Now the bad news, you have to

Morning all; I have a 5103N/D13 which *I think* is equiv.to the 5113. Could someone tell me what the rear-signal-out comprises? The rear panel of the 'scope is punched for the sockets; is it just a